Search results: x20

Sort order

1,469 models

Rectangular 140x200mm Stacking Baskets & Lid - Hexagon Pattern

This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!

Downloads
16,869
Likes
4,158
Rating
4.95
P
Printableskunaa

M3 hex screw and nut (M3x10, M3x15, M3x20, M3x25, M3x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
9,777
Likes
386
Rating
4.45
P
Printablesderzoelli

XYZ Calibration Cube 20x20x20mm

XYZ Calibration Cube 20x20x20mm

Downloads
7,026
Likes
112
Rating
4.89
P
PrintablesMAQUINA

IKEA SKADIS PEGBOARD 200X200MM / 360X360MM

3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…

Downloads
6,311
Likes
696
Rating
4.71
P
Printableskunaa

M4 hex screw and nut (M4x10, M4x15, M4x20, M4x25, M4x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
4,446
Likes
142
Rating
4.67
P
PrintablesHobby Hoarder

Bed leveling squares (200x200mm)

You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…

Downloads
3,623
Likes
88
Rating
5
P
Printableskunaa

M5 hex screw and nut (M5x10, M5x15, M5x20, M5x25)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
3,266
Likes
112
Rating
4
P
PrintablesShpooople

Square Baroque Ornamental Picture Frame (20x20cm)

The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…

Downloads
2,891
Likes
574
Rating
4.93
P
PrintablesTlustejHanz

Parkside X20V tools holder

Used 2 self-tapping screws to attach to the shelf. Printed out in PET with at least 3 shells. Normal version for regular size tools. Bigger version for PASSK green impact wrench. Tested on: PABSP 20-Li C3, PDSSAP 20-Li B2, PASSK 20-Li A1,…

Downloads
2,535
Likes
339
Rating
4.92
P
Printablesextrablind

Battery Adapter From Parkside X20 to Makita 18v | extended body | Parametric | F3D

[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…

Downloads
2,465
Likes
185
Rating
4.4
P
Printableskleenecks

IKEA Skadis (200x200mm)

IKEA Skadis inspired (compatible) peg board that takes up 200x200mm.

Downloads
2,421
Likes
376
Rating
5
P
Printableskunaa

M6 hex screw and nut (M6x10, M6x15, M6x20, M6x25, M6x30)

nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
2,245
Likes
106
Rating
5
P
PrintablesSpretrep

TP-Link Deco X10, X20, X50, X55, & X60 wall mount

Wall mount for a TP-Link Deco X50 node/4g-router and 5G router. The router model is for a X50 5G router which is oval and tapered upwards, not round. It isn't as snug as the node bracket, but when hooked up to the cables it wont move. If…

Downloads
2,119
Likes
131
Rating
4.67
P
PrintablesEA3D

Aluminium profile 20x20

profile popular for building your own 3dprinter

Downloads
1,955
Likes
68
Rating
0
P
PrintablesParagon

Parkside x20V Team - Powiekszenie Baterii 3x

Do pobrania moja wersja powiększonej baterii 3x względem oryginału do Parkside X20V Team, wzorowałem się na wersji dostępnej poniżej jednak samą obudowę zrobiłem od nowa wykorzystałem jedynie wsad na ogniwa 3x… Oryginalne źródło:…

Downloads
1,913
Likes
170
Rating
5
P
PrintablesDavidB.

Tp-Link Deco Wall Stand for x10 x20 x50 x55 X60

Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.

Downloads
1,840
Likes
97
Rating
5
P
PrintablesKretzu

PARKSIDE X20 Battery Adaptor

PARKSIDE X20 Battery Adaptor - adapt any power tool to use a Parkside x20 Battery . Revive your old tools.

Downloads
1,717
Likes
169
Rating
4.8
P
PrintablesHessenDnD

V-Slot 2020 20x20 Extrusion End Cap

Push in end cap for V-Slot 2020 Extrusion, 20x20 Extrusion.

Downloads
1,696
Likes
170
Rating
4.75
P
PrintablesTDX3D

First Layer Bed Level Test (200x200)

Used for testing bed level. After noticing defects in the first layer using PETG, this is a helpful guide to achieve smoother results. I suggest sizing down by 50% or even 35% to speed things up. Level bed with the knobs Re-Calibrate Z-…

Downloads
1,615
Likes
23
Rating
5
P
PrintablesMarin

PARKSIDE X20V_Team Battery connector with Faston terminal

Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…

Downloads
1,290
Likes
168
Rating
4.6
P
PrintablesPajaa

PARKSIDE X20V Team Battery Holder

There are many battery holders for Parkside X20VTeam here. I made this one few years ago. Tested with PAP 20 A1/A3 batteries. For mounting purpose, you can use PDF template (print with 100% scale) and 3x D3,5mm Wood screws. My printing…

Downloads
1,258
Likes
134
Rating
4.92
P
PrintablesFr3D

Lidl Parkside X20V-Team Ikea Skadis 20V Battery Holder

I couldn't find any low profile battery holders for my Parkside X20V Team batteries, so I remixed one! I designed this way back in 2020, but never published it. Sorry about that, here you go! If printed in the pictured way you don't need…

Downloads
1,222
Likes
212
Rating
4.83
P
PrintablesPolyPrint
Downloads
1,125
Likes
11
Rating
5
P
Printablesmirabatek

Modular Desk Fan 120mm (Optional Parkside X20V Mount)

Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…

Downloads
1,106
Likes
939
Rating
4.93
P
PrintablesWalli

MKS DLC32 box for 2.4 LCD on 20x20 V-Slot

My Twotrees Totem laser was provided with a 8 bits board. I wanted to have autonomous laser engraver thus I switched for MKS DLC32 with low cost 2.4 LCD screen. This design will work on any 20x20 V-slot rail. I have used PLA as there is…

Downloads
1,101
Likes
59
Rating
5
P
PrintablesPeut

Parkside X20V Tool Mount

Great design found on Thingiverse, great designs need a bigger stage and credits for Lorenzo54 who created and uploaded on Thingiverse! The tool mount is great in combination with the battery holder . Printing instructions: Resolution:…

Downloads
1,083
Likes
158
Rating
5
P
PrintablesReDevil75
Downloads
1,056
Likes
7
Rating
5
P
PrintablesThe_Trap__

Calibration Cube 20x20

Kalibrierungs würfel 20 x 20 mm mit angeschrägten Kanten um evtl. vorhandenen Elefantenfuß zu kompensieren. Calibration cube of 20 x 20 mm with chamfered edges to compensate for any possible elephant's foot.

Downloads
1,029
Likes
23
Rating
5
P
Printablesmirabatek

Power Supply for Parkside X20V Battery

This is model for portable power supply and with 5V USB output compatible with Parkside X20V Team battery. It utilizes power supply module i.e DPS3005, there are also other cheaper modules with the same size which can be used as well.…

Downloads
985
Likes
355
Rating
5
P
PrintablesQWake22

HSW Edges for 211x201

A border I created using Xander's OpenSCAD file for my HSW. Hopefully, it might save someone else the trouble of finding the best design. It suits wall-honeycomb-k1-211x201.stl for 220x220 size bed such as my Ender 3 S1. Print as many…

Downloads
967
Likes
223
Rating
4.8
P
PrintablesG-workz3D

M8x20 - bolt - screw

M8 x 20 mm Bolt or screw with 1.25mm thread pitch follow or tip if u like <3 G-workz3D <3

Downloads
896
Likes
30
Rating
5
P
PrintablesTHop3D

Nature Wall Art with 2 deer and 3 mountains 600x300mm + loose parts cut to 200x200

Nature Wall Art with 2 deer and 3 mountains The full model is 600mm wide, 300mm high and 3mm thick. There are also pre cut parts so it can be printed on smaller printers 200x200 and can be assembled later. I suggest assembling with glue…

Downloads
896
Likes
212
Rating
5

Cable clip for aluminium profile 20x20 mm V-slot 6 mm

They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling

Downloads
876
Likes
96
Rating
4.43
P
PrintablesRilot

Parkside X20V ceiling tool mount

Print flat with supports for the groove at the side. Designed from a scan of an X20V battery. 17-03-24 - Added STEP file

Downloads
856
Likes
117
Rating
5
P
PrintablesBurgstall

Parkside X20V Team tools minimalist wall mount

None of the existing wallmount models pleased my minimalistic eye, so I decided to make my own. This fits at least all of the three X20V team tools that I have, although for the drill I had to also make a new belt clip to accommodate…

Downloads
853
Likes
75
Rating
4.83
P
Printablesbjripp

20x20 Aluminium Extrusion Corner Bracket

60x60x20 corner bracket that will accept M3 screws. Prints flat without supports.

Downloads
852
Likes
178
Rating
5
P
PrintablesNinekill

Makita LXT 18V battery to Parkside x20 tool adapter

Makita LXT 18V battery to Parkside x20 tool adapter. If you include a locking part and then screw together top and bottom parts the adapter is fixed to the tool. Makita battery is always detachable. Bottom part uses original Makita…

Downloads
835
Likes
75
Rating
0
P
PrintablesEng. Yehia

Hirth Joint for 20x20 extrusions

Just a simple Hirth joint that I've made, which was very useful and very rigid for my application. Category: 3D Printing

Downloads
833
Likes
136
Rating
5
P
PrintablesAuzziebogan26

20x20x20 Calibration XYZ Cube

use this as your first test print to calibrate your printer

Downloads
817
Likes
16
Rating
5
P
PrintablesIvanov Kirill

Profile pipe plug cap 20x20 and 40x20

Profile pipe plug cap 20x20mm and 40x20mm Заглушка профильной квадратной трубы 20х20мм и 40х20мм

Downloads
763
Likes
42
Rating
5
P
PrintablesMarco

Flow Ratio Calibration Cube 20x20x20

This is a simple calibration cube to help determine the correct flow ratio. It is an exactly 20mm cubed solid shape. Everything below is based on a Bambu Lab P1P with a 0.4mm nozzle, but I would assume you can scale up/down to 0.2mm/0.6mm…

Downloads
738
Likes
27
Rating
4.5
P
PrintablesSpectreGadget

TP-Link Deco X20 Wall Holder

A wall mount for the TP-Link Deco X20 wifi router node. Opening to see the status light, node information on the bottom, and room for cable connections. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Downloads
735
Likes
49
Rating
5
P
Printablescmenard

30x30 to 20x20 Flight Controller adapter

This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles

Downloads
718
Likes
14
Rating
5
P
Printablesbeerman

Shore Trooper Helmet V2 (Sean Fields) Split to fit 200x200 build plate

This is the V2 version of SeanKFields Shore Trooper helmet. All credit for this model goes to him I merely chopped the files to fit my bed. The original files (including the armour) can be downloaded directly from…

Downloads
703
Likes
170
Rating
5
P
PrintablesKotiskoMiau

Test cube 20x20x20mm for snapmaker U1 to print with 4 color

The cube consists of four solids: the main solid is a 20x20x20mm cube that forms the body of the cube. The next three solids have cross-sections shaped like the letters X, Y, and Z. The cube was prepared for the Snapmaker U1 for a 4-color…

Downloads
702
Likes
73
Rating
5
P
PrintablesJan Olejnik

TinaTina - 90mm brushless drone frame (1103/20x20mm)

A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…

Downloads
692
Likes
186
Rating
5
P
PrintablesEivind Birkemo

HSW - 211x201 Stack - Without AMS

Honeycomb Storage Wall 211x201 that you can print in stacks. important to print it with outside up and with ironing enable on all top surfaces. I recommend to print the test file first to see if the print settings is good. After print,…

Downloads
675
Likes
109
Rating
5
P
PrintablesParagon

Parkside x20V Team - Powiekszenie Baterii 2x

Do pobrania moja wersja powiększonej baterii 2x względem oryginału do Parkside X20V Team, wzorowałem się na wersji dostępnej poniżej jednak samą obudowę zrobiłem od nowa wykorzystałem jedynie wsad na ogniwa 2x… Oryginalne źródło:…

Downloads
660
Likes
82
Rating
5
P
PrintablesWhat2Print

5 Point Star Knob 1/4"x20

5 Point Star Knob 1/4"x20 hole for a 14x20 bolt. I used it on a swinging table for my disc sander. I would have taken a pic but I sold the lathe which the sander table adapted to.

Downloads
653
Likes
116
Rating
5
P
PrintablesPjotrStrog

Parkside X20V battery adapter with addon for Pinecil/T100 iron

A universal adapter for the X20V Parkide tool battery with an addon for connecting a Pinecil or T100 style soldering iron. The adapter can be used to attach your own addon. I included a step file for remixing the designs to your own…

Downloads
650
Likes
165
Rating
5
P
PrintablesBlueFalcon1066

Ender 3 V2 40x20 Hot End Fan Shroud

I wanted to switch out the stock hot end fan with a noctua A4x20 but couldn't find a new shroud that I liked. I love the stock shroud, so I basically just redesigned it to fit the larger fan and removed the grills to help with noise. The…

Downloads
647
Likes
76
Rating
5
P
Printableskaje

Lathe Change Gears - 9x20

If you have a 9x20 lathe then you know what change gears are, and if you bought a used 9x20 lathe some of those gears may have gone missing. These 3D printed gears can be used to replace missing gears. Even if you have the original metal…

Downloads
644
Likes
45
Rating
5
P
Printables3dprintguy

1/4”x20 bolt, nut and washer

Prints a bolt ¾" long along with a matching nut and washer all ¼" x 20 thread.

Downloads
626
Likes
30
Rating
5
P
PrintablesFladdie

Parkside x20V Team battery adapter

Inspired by many other adapters, I designed this one. The main focus was on easy printability without supports and minimal material usage. I have uploaded two versions: 1. direct cable connection 2. XT60 Connector When using the XT60…

Downloads
619
Likes
88
Rating
5
P
PrintablesDavid

FlashForge Adventurer 5M lower rear fan spacer- to fit a standard 40x20mm fan to non Pro model for filtering.

This spacer fits over the plastic stand-offs that prevent you retrofitting a stock 40x20mm fan on the AD5M lower HEPA filter housing outlet. Without the spacer there is an approximately 4mm air gap between the fan body and lower filter…

Downloads
614
Likes
94
Rating
5
P
PrintablesAndys1957

Open Cable Chain with Clip 30x40x20mm

Update 16.4.23: Step-Files uploaded Open Cable Chain with Clip 30x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories

Downloads
613
Likes
31
Rating
5
P
PrintablesBleo3

Ender 3 V2 Bed Level Grid 200x200

Just another bed leveling grid. I've seen several, but I wanted to put a little more on the plate for a test print. Probably overkill, but it works. The print May have to be scaled a bit for your profile.

Downloads
599
Likes
27
Rating
5
P

PARKSIDE X20 TEAM BATTERY HOLDER V3

A useful battery holder for Parkside devices. I allowed myself to increase the number of insertion places.

Downloads
593
Likes
41
Rating
0
P
PrintablesSimonp1080

20x20 Extrusion PROFILE

USE CASES - printed v-slot extrusions - CAD design - shenanigans PRINTING INSTRUCTIONS - Forget infill, Max out wall number - lower your acceleration if your using a bed slinger or suffer from ringing - use a lower speed ringing sucks -…

Downloads
591
Likes
25
Rating
0
P
Printablesjosepilar

DJI O3 Air Unit Cage 20x20 and 30x30 adaptor

Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…

Downloads
588
Likes
30
Rating
0
P
PrintablesRilot

Parkside X20V battery wall mount

Print flat with supports Made from a scan of an X20V battery

Downloads
584
Likes
67
Rating
5
P
PrintablesJGW

Parkside(tm) X20V basic adapter (STP, STL, FreeCAD)

Parkside X20V basic Adapter Not much to say here. If you found this, you know what you need :) Disclaimer: Those batterys pack quite a punch. If you short them out or start a fire using this design, I can't be held liable. Please print…

Downloads
577
Likes
34
Rating
0
P

PARKSIDE X20 TEAM BATTERY HOLDER V4

I used PETG and nozzle 0.6

Downloads
568
Likes
79
Rating
5
P
PrintablesMiGarro

Parkside X20v Team battery in Ferrex tool (battery enter from same side as adapter)

All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…

Downloads
552
Likes
35
Rating
5
P
Printablesgig

CUBO CALIBRAZIONE 20X20

Cubo utilizzato per la precisione dimensionale della stampante utile per calcolare gli step per mm e altri parametri Cubo stampato con paramtri di default di prusa slicer per prusa mini+ e filamento della geeetech Per una maggior…

Downloads
543
Likes
0
Rating
0
P
PrintablesMobot

20x20 Extrusion corner bracet for M4 screws

The original model 60x60x20, for M3 Screws, by bjripp is super good go check it out! I just made the holes lager to fit M4 screws with a cylinder head.

Downloads
533
Likes
123
Rating
5
P
PrintablesPetar Ivanov

Parkside x20v charger wall mount

Made in two variants. It is good to be printed from PETG! You will need 4 pcs 4x40mm self-tapping screws to mount the charger and 2 pcs screws for the whole mount.

Downloads
533
Likes
96
Rating
4.33
P
PrintablesJer

Double Shelf with Honeycomb Storage Wall Sides 200x200x150mm

Wall-hanging double shelf with Honeycomb Storage Wall (HSW) sides to store more things.

Downloads
529
Likes
150
Rating
5
P
PrintablesEloRaf

Luxo Jr for 200x200mm printer with Led light

Here is the Pixar Luxo Jr lamp totally 3D printed on 200x200mm bed and with led light ! To realize it you need white PLA for all parts except for : Join rods : you can used for it american fridge's pvc pipe (1/4"pipe) Light : you need a…

Downloads
509
Likes
60
Rating
0
P
PrintablesDaindi

Dog Hole template 96x20mm

template for 20mm holes distance 96mm 3x2 hole with bench dogs to align the first row parallel to the edge

Downloads
509
Likes
76
Rating
5
P
PrintablesEldarHan

Creality Ender 3 V2 - Clean Shroud 2.0 (40x20mm Hot-End Fan, 4010 Blower Fan)

This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…

Downloads
506
Likes
66
Rating
5
P
PrintablesOndřej Kočí

Držák na baterie parkside X20V TEAM

Držák na baterie parkside X20V TEAM, tisknu ho se 100% vyplní a na podpěrách.

Downloads
501
Likes
28
Rating
5
P
PrintablesMr_Q

Parkside X20V Vacuum (PHSSA 20-LI C1) Filter Cover

Filter cover to reduce dirt, animal hair and stones getting inside the filter for the cordless Parkside 20V Vacuum. Printed the model myself without supports, but you probably get better rounded corners when you do enable it. Of course,…

Downloads
497
Likes
61
Rating
5
P
PrintablesJMack

Universal Server Rack Ear 20x20mm to 28x28mm

This is a universal server rack ear fitting 20x20mm, 24x24mm, and 28x28mm bolt patterns. I based this off of the Linksys rack ear but made it a bit more universal since my Cisco Switch required a 28x28mm bolt pattern. I also made the 3…

Downloads
492
Likes
49
Rating
4.67
P
PrintablesPhillip Skoric

Simple 20x20x20mm cube

Just a simple cube 20x20x20mm Print instructions Category: 3D Printing Tests

Downloads
492
Likes
5
Rating
5
P
Printablesjac_2307

calibration cube / cali cube / XYZ 20x20

The original XYZ cube looks a bit boring. So I made a redesign with some changes to make it look more interesting

Downloads
465
Likes
11
Rating
5

Angle Bracket for 20x20 Aluminium Profile

Easy to print, don't need support.

Downloads
463
Likes
38
Rating
5
P
PrintablesClemi

T-Nuts Parkside 20V Battery X20V-Team Holder for ikea skadis

Just a simple screwed Battery holder für ikea skadis using T-Nuts. Thanks for the inspiraton to this model and Fr3d . There is one Version with T-Nuts Aligment Guide and one without. I printed it with some supports as shown in the…

Downloads
462
Likes
71
Rating
5
P
PrintablesPolyGone

40x20 Cable Duct for 4040 Aluminium Profile

This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.

Downloads
458
Likes
69
Rating
5

Cable clip for aluminium profile 20x20 mm slot 8 mm

They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling

Downloads
453
Likes
31
Rating
0
P
Printablesemtrax

2.5″ Cinewhoop (20x20 Stack)

This project was actually just for fun....but it ended up flying (unexpectedly) very well. All you need additionally are 14 pieces of m3 18mm nylon standoffs. My Configuration: Stack (20x20): Mamba F405 MINI MK2 + F30A, AKK FX3-Ultimate +…

Downloads
446
Likes
71
Rating
5
P
Printableskaje

9x20 Lathe Sacrifical 80 tooth gear

This gear should work on numerous 9x20 lathes available from Grizzly, Central machinery (Harbor Freight), Jet, and many others. This is an 80 tooth "sacrifical" gear - so called because the idea is that in the event of a head crash or…

Downloads
435
Likes
17
Rating
0
P
PrintablesG-workz3D

M7x20 Bolt - Screw

M7 x 20 Bolt or screw normal thread tip or follow if u like <3 G-workz3d <3

Downloads
434
Likes
12
Rating
0
P
PrintablesZePunisher.3D

Support parfum adopt' x20

voici un support crée pour les parfum de 30ml ( taille normal ) de marque adopt' un organisateur de 20 emplacement. quand tout les parfum sont mis dedans ça fait un effet d'escalier ( ceux de l'arrière plus haut et ceux de l'avant plus…

Downloads
433
Likes
18
Rating
0
P
PrintablesTymekd

Cube 20x20

Cube 20x20 for callibration test

Downloads
424
Likes
6
Rating
0
P
Printablesschaloule

Parkside X20 battery to Einhell device adapter (Parkside Akku Adapter für Einhell Geräte)

Parkside batteries are often available at low prices. With this adapter, you can connect a Parkside battery to Einhell devices. The focus of the design was on printing without critical overhangs so that printing is possible even without…

Downloads
417
Likes
54
Rating
5
P
Printables3D-Muc

NEMA 17 mount for 20x20mm Alu profile

Simple, stable mount for a NEMA 17 stepper motor Easy to print as flat on front side Aluminum profile size 20x20mm 2 versions, longitudinal to the profile and transverse Category: 3D Printer Parts

Downloads
408
Likes
58
Rating
5
P
PrintablesBasementLAB

Strong Angle Bracket 30° - 45°- 90° - M6 - 1/4x20mm Slots

Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…

Downloads
408
Likes
59
Rating
5
P
PrintablesArt3Design

Dice 20x20 (various versions)

If you need a quick dice to play your game, you can print these dices. 6 versions aviable: 1a. Cube dice 1b. Cube dice shell 2a. Round dice 2b. Round dice shell 3a. Classic dice 3b. Classic dice shell Cube dice is also great as…

Downloads
403
Likes
15
Rating
5
P
PrintablesPhil Tomlinson

Modular 20x20 Air Filter

I got tired of the volume (sound and space) of my Corsi-Rosenthal, but wanted something that uses cheap and cheerful 20x20x1 MERV 13 filters so I came up with this. This air filter has not been performance tested and I make no claims as…

Downloads
400
Likes
124
Rating
5

2,5'' HDD/SSD holder (x10 and x20)

Organize your loose drives with this practical holder! Available in the x10 and x20 version.

Downloads
395
Likes
64
Rating
0

PARKSIDE X20 TEAM BATTERY HOLDER - BRACKET

LIKE - SHARE - COMMENT Lean design, fast print, hole pattern is 40x50mm, print orientation is shown on the photo (for optimal support generation-zigzag). For table / shelf installation. Slicer shows 45min for this print with: 0.8 nozzle…

Downloads
385
Likes
35
Rating
4.8
P
PrintablesThimira

Fan Bracket for LSI 9207-8i with 40x20mm Fan (NF-A4x20)

This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…

Downloads
383
Likes
36
Rating
5
P
PrintablesHuỳnH HnýuH

20x20 cm Lego sorting tray

The LEGO Sorting Tray features multiple compartments, allowing you to organize bricks by size, color, or type, making it easier to find the pieces you need. Its modern design and durable construction ensure it fits seamlessly into any…

Downloads
383
Likes
38
Rating
4.33
P
PrintablesIgOrFeLiPe59

Caixa Organizadora 100x50x20

Caixa Organizadora 3D Baixe e imprima este arquivo para criar sua própria caixa organizadora personalizada! Ideal para armazenar pequenos objetos, esta caixa é prática e fácil de montar. Perfeita para organizar seu escritório, quarto, ou…

Downloads
379
Likes
13
Rating
0
P
PrintablesLDeath

Stackable Refrigerator Organizer Box 200x200x80mm - No Supports Needed

Tired of wasted vertical space in your fridge? This stackable organizer box helps you make the most of every shelf. Design highlights: Split into two print-friendly parts — no supports required Optional stacking connector — print only…

Downloads
375
Likes
153
Rating
0
P
Printablessuit

Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan

Print from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example. Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm

Downloads
375
Likes
50
Rating
4.25
P
PrintablesMiGarro

Parkside X20V battery in Ferrex tool (with reverse side entry)

All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…

Downloads
371
Likes
25
Rating
5
P
PrintablesFlotschi

HueForge Frame 200x200

Hi, i like to made 200x200 HueForge pictures and i needet a frame for it. It fits pictures 200x200 easy. Dosnt matter if the picture is 2 or 5 mm thick. I am using the new PEY,PEO,…and so on print plates for it with a holo grafik. Looks…

Downloads
370
Likes
88
Rating
5