1 / 4
Parkside x20V Team battery adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery adapter for Parkside with cable or Xt60 plug
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 618
- Makes
- 5
- Views
- 5,450
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Inspired by many other adapters, I designed this one.
The main focus was on easy printability without supports and minimal material usage.
I have uploaded two versions:
1. direct cable connection
2. XT60 Connector
When using the XT60 Connector, the cables are soldered in place. To avoid too much heat on the XT60 housing and thus movement of the sockets, it is advisable to insert an XT60 connector on the output side.
As xt60 connector i use a XT60E-M panel jack.
Because *.stl data are very bad modifiable I provide *.stl, *.3mf, *.stp and *.sldprt here.