Search results: x220

Sort order

113 models

P
Printablesdmdesign

Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh)

A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…

Downloads
3,213
Likes
159
Rating
5
P
PrintablesGhostPants

Ender 3, 3P, S1, S1P first layer test 220x220

Print layer height a .2 on printer to test first layer

Downloads
1,186
Likes
18
Rating
5
P
Printablesmathiasl

Corner Shelf 220x220

Liked the shelf by Pizzaman76 but wanted it a bit bigger so I made it 220x220mm

Downloads
516
Likes
62
Rating
5
P
PrintablesAqua9384

220x220 First Layer Test

Print at a layer height of 0.2 mm If you want to make it bigger or smaller change the X and Y scale, leave Z at 100%

Downloads
286
Likes
7
Rating
5
P
Printablesiggy

Thinkpad X230 X230i X230T X220 X220i X220T Hard Disk Drive (HDD) Cover - FRU 04W1414

I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…

Downloads
243
Likes
20
Rating
5
P
PrintablesPrinterfreak

Bed Level Adjustment Tool - 220x220mm Beds

This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm

Downloads
232
Likes
12
Rating
5
P
PrintablesVeillax135

16pt/25pt Bed Leveling Mesh for 220x220mm Bed

This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…

Downloads
184
Likes
6
Rating
5
P
PrintablesKevin

The Prusacaster - a 3D printable guitar (No Hassle 220x220 Build Plate Prepped)

These are orientations I have made in order to fit this project easily onto a 220x220 built plate and save you the time

Downloads
183
Likes
12
Rating
2
P
Printablesfacelesstech

Thinkpad x220 SSD caddy

Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.

Downloads
176
Likes
22
Rating
5
P
PrintablesHel3D

Bed level test 220x220x0.2

Bed level test for a 220x220 bed. There are plenty of similar bed tests but I wanted one specifically for my printer to just load and run. Set walls to 1 Turn off prime spiral or line or similar as the print will take up that space as…

Downloads
167
Likes
10
Rating
5
P
Printablesagroczech

Kompletní model dronu Eachine Wizard x220

Ahoj, toto je moje diplomová práce z roku 2020. Rád bych se s vámi o ní podělil, jelikož se jedná o plně funkční model. Jedná se o kopii Eachine Wizard x220 s drobnými úpravami (zpěvnění ramen atp. kvůli tisku z plastu). Šroubky jsou…

Downloads
149
Likes
16
Rating
0
P
PrintablesBuraku

Bed + Bed Frame 180x220cm - 1:10 - House / Home Mockup Furniture

Adjust the scale using print scale on your slicer, this model is 1:10.

Downloads
137
Likes
18
Rating
0

Cascade separated for 3D Printing (220x220 bed)

Here is my video explaining the process of making such wall arts:

Downloads
136
Likes
31
Rating
0
P
PrintablesRobert Schiele

Laptop Camera Cover for ThinkPad X220

Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.

Downloads
124
Likes
12
Rating
0
P
PrintablesJamie

ATX PSU bracket for 10 inch rack 220x220 mm Version

2U sized mount for an ATX PSU in a 10-inch rack modified for a 220×220 mm build plate I would highly recommend printing in PETG rather than PLA, as PLA may deform from tension and heat. If you place this model in the centre of the build…

Downloads
122
Likes
17
Rating
0
P
PrintablesArkovski

World map 3d with elevation | (grouped & adjusted (cut) for smaller bed types - 220x220)

PETG, 5% infill, 2 layers. Maybe 200x200 will be fine with small mods. If you want so, let me know in the comments, I'll create smaller versions then. It's a simple work, but boring and took me quite some time, so you don't have to waste…

Downloads
119
Likes
9
Rating
5
P
Printablesysengard

Thinkpad Badge Logo for X220

Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…

Downloads
110
Likes
8
Rating
5
P
PrintablesMikRobi

Electric motor fan 58x220mm

Electric motor fan 58x220mm

Downloads
105
Likes
16
Rating
0
P
Printablesblakek

Anycubic Mega S - guide for 220x220 build plate install

These are for helping align a smaller 220x220 build plate for a Anycubic Mega S. The default build plate is 240x220 (build area is 210x210 due to clips). I wanted to change the default glass for a PEI sheet, but it's very difficult to…

Downloads
105
Likes
18
Rating
0
P
PrintablesNillerk

Star Wars C3PO Hueforge 220x220

Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings. This is done in 2 prints and then the C3PO is carefully put into the background piece. It is…

Downloads
102
Likes
28
Rating
0
P
PrintablesTrash Cant

220x220 bed level

remixed to fit on 220x220 bed

Downloads
94
Likes
5
Rating
0
P
PrintablesKotei Koteevich

Cat moon halloween 140x220 Hueforge

The painting “Cat moon halloween” for my Light frame for hueforge / lithophane arts This work was created for "Halloween 2026: Make It Move 🎃" Among the movable elements there is a hinge for the foot, which acts as a stand for the frame…

Downloads
87
Likes
43
Rating
5
P
PrintablesSaintVY

Quest 2 Elite Strap to Quest 3 strap replacement (shortened for 220x220 beds)

This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).

Downloads
80
Likes
7
Rating
0
P
PrintablesSkyline989

Eachine Wizard X220S Cinewhoop Conversion Ducts

Print in PETG Props need to be trimmed a litte bit

Downloads
80
Likes
13
Rating
0
P
PrintablesLoXiRe

220x220x2 mm circle test

I had a problem on my ender 3 s1 pro on prusa slicer thaqt i could not use my full bed size due to the purge line in the gcode and printer profile in prusaslicer . That is kinda fooling the slicer so if ANYONE has a better way of doing it…

Downloads
77
Likes
6
Rating
0
P
PrintablesDadof3

Socket org. (metric) V3 (will fit 220mmx220mm print bed)

The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly. I squeezed everything tighter and was able to get…

Downloads
77
Likes
17
Rating
0
P
PrintablesMr_Kes

Lenovo X220 X230 HDD / SSD bracket

Bracket for Lenovo X220 X230 2.5" HDD / SSD. You need two pcs of this to insert drive into laptop. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: gembird PLA+ red…

Downloads
77
Likes
3
Rating
0
P
PrintablesPolymentor

Hand saw - 300 mm blades (printable on 220x220 bed)

Design considerations: use 300 mm saw blades, ergonomic, but small enough to be printed on 220x220 mm bed. To mount the blade you need two M4 screws (at least 25 mm long) and two M4 nuts. Recommended print settings: if your print bed is…

Downloads
72
Likes
10
Rating
0
P
PrintablesRobas1

GPS BN-880Q and antenna holder 5 inch drone Eachine Wizzard X220 V2

Hi, this is my original project for Eachine Wizzard X220 V2 (but it will also suit to many other 5" quad drones). It's size is designed for typical antennas and Beitian GPS BN-880Q with compass. Print it in slow motion with 100% infill…

Downloads
72
Likes
8
Rating
0
P
Printablesbeckhdtm

Little Boy S ATX PSU Single Full PCIe 220x220mm Bed Optimized

LIGHT BOY S FULL ATX PSU SINGLE FULL PCIE Every piece as been remodeled from scratch for a 220mm x 220mm bed size. 0.3mm tolerances. (loosy goosy for the lazy people, like me :) ) Accommodates 2x 120mm slim 15mm height fans located on…

Downloads
69
Likes
11
Rating
0
P
Printables43D PRINT

Delonghi extension (remix of Findusdwarf) for bed 220x220 no supports around

No need supports to outer part (because I added chamfer)

Downloads
67
Likes
7
Rating
0
P
Printablesjws

Thinkpad X220 Hard Drive Cover

Print with bottom side down

Downloads
66
Likes
3
Rating
0
P
PrintablesBasementLAB

Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style

Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…

Downloads
65
Likes
12
Rating
0
P
PrintablesLachsmalstift

220x220 First Layer Test

Print this and adjust your Z-Offset while its printing! Works for Bed leveling too!

Downloads
61
Likes
1
Rating
0
P
PrintablesEduard Sukharev

Stackable Keycaps box - 220x220, spiral mode

Quick print vase mode stackable tray box for mechanical keyboard keycaps. Holds up to 120u of keycaps. Prints both tray and lid in vase mode.

Downloads
54
Likes
5
Rating
2
P
PrintablesGiggle

EACHINE Wizard X220 Feet (16mm)

EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw…

Downloads
54
Likes
5
Rating
0
P
PrintablesMikRobi

Electric motor fan 58x220mm

Electric motor fan 58x220mm

Downloads
52
Likes
7
Rating
0
P
Printablessquirrelf3d

VZbot Display Mount - remixed to be printable on 220x220mm bed

Parts are not oriented, I'll let you play with that in your slicer The larger piece does fit flat on 220x220 (longest length is 215mm) check original post for more info, and/or want to print it as a single piece…

Downloads
52
Likes
12
Rating
0
P
PrintablesDDD Projects

Brick Floor Chess Board Multi-layer Coloring 220x220

I wanted a single print chess/checker board that would fit on my Ender 3 printer. I designed this board to fit with-in the 220x220 bed size. To print the darker squares, use post processing of gcode and enter a pause. Finally switch the…

Downloads
50
Likes
7
Rating
0
P
PrintablesLoading

Eachine wizard x220 v2 arm end

Probably best printed in tpu or some sort of wear resistant filament

Downloads
46
Likes
6
Rating
5
P
PrintablesSkyline989

Eachine Wizard X220S Antenna Relocation

Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS

Downloads
46
Likes
4
Rating
0
P
PrintablesStone Designs

Maximum Desk Organizer for a 220x220 Printer

This organizer has two options one that is exactly 220 and one that is a 1mm smaller on 2 sides for printer that refuse to print the full size. Features: Top left scissor slot. Standard size sticky notes slot with a snug fit in the square…

Downloads
45
Likes
11
Rating
0
P
PrintablesValvetVipe

Eachine Wizard X220 GPS and Antenna TPU Mount

Not for X220s. If you are interested in a version for the X220s you can contact me. I attached the gps module with 3m double-sided adhesive tape. but you can also use a cable tie (2.5mm). Layer height 0.2 - 0.32 TPU 95A

Downloads
41
Likes
3
Rating
0
P
PrintablesRD3D_PRINTWERKZ

reinforced distressed vornai skadis board panel 220x220x5.1

Give your IKEA SKÅDIS wall system a modern, designer look with this fully custom distressed reinforced Voronoi panel , sized to perfectly match the original 220×220×5.1 mm SKÅDIS tile. Strengthened geometric lines + clean textured finish.…

Downloads
41
Likes
10
Rating
0
P
PrintablesConcealed45

Kusarigama pated for 220x220 printer

everything split down the center for no support printing, use cuts of filament in locating holes and glue together. need 50 of the chain halves Category: Costume

Downloads
41
Likes
9
Rating
0
P
PrintablesFyodor321

220x220x250 Giant Cube Challenge

This is 220x220x250 Giant Cube Challenge for all Creality Ender 3 printers. You can flex on anybody that you printed a giant cube! Would take about 3 to 5 days depending on printing speed.

Downloads
40
Likes
1
Rating
0
P
PrintablesNillerk

Princess Leia Hueforge 220x220

Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings in framed and unframed versions. Print at 100% infill with a layer height of 0.04mm with a base…

Downloads
40
Likes
12
Rating
0
P
PrintablesSkyline989

Eachine Wizard X220S Frame Protection

Print in TPU or PETG for best protection

Downloads
40
Likes
4
Rating
0
P
PrintablesWoodbeard

8x8 Arrow Stand 220x220x82mm | Pfeilständer

(Google translated) The arrow stand is 220x200x82mm, for 8x8 arrows (64). The holes get larger and larger, from 6.7mm, 7.7mm and 8.6mm. Fits my ID 4.2, 5.2, 6.2 carbon arrows from min.1000 to 500 spine. The distance between the holes is…

Downloads
39
Likes
5
Rating
0
P
PrintablesLoading

Eachine x220 v2 gopro mount

A camera mount designed for Eachine x220 v2 fpv drone

Downloads
38
Likes
3
Rating
0
P
PrintablesWatchdog1977

4x4 gridfinity box shelf for (220x220 build size)

4x4 shelf for the 4x4 gridfinity boxes. set in 4 parts. 3 shelves and top, remove sections you dont need orientation is good as is. Only print either 1 base or top at a time. no supports needed. I use 2 walls and comes out great. use the…

Downloads
37
Likes
8
Rating
0
P
PrintablesPlasma Neo

Level Test for Ender 3 Series (220x220 build volume)

The perfect level test for most ender 3 series and other 220x220 build volume printers Intended for 0.2mm layer height (if using a purge line you should have to shrink its width)

Downloads
37
Likes
2
Rating
0
P
PrintablesAviator

Eachine Wizard X220s GPS Mount

Designed for a BN-220 GPS.Need new Screws M3 x 16mm

Downloads
35
Likes
0
Rating
0
P
Printablesguserav

Fixation template and brackets for ex2200-12C

This is a small 2 part model to mount an Juniper ex2200-12C under a desk. This model utilizes screws to fixate the switch. The triangle part is just for easier mounting as the screws are already spaced correctly. As this is an under table…

Downloads
34
Likes
1
Rating
0
P
PrintablesSkyline989

Eachine Wizard X220S Arm Protection

Print in TPU or PETG, replaces the LEDs

Downloads
32
Likes
8
Rating
0
P
PrintablesSkyline989

Eachine Wizard X220S GoPro Hero 5/6/7 Mount

Full Protection, 10, 15, 20 and 25deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws

Downloads
31
Likes
4
Rating
5
P
PrintablesDanny33

modular workshop organiser - box internal dimensions 235x120x220mm

"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…

Downloads
29
Likes
4
Rating
0
P
PrintablesDanny33

modular workshop organiser - Box internal dimensions 217x173x220mm

"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…

Downloads
28
Likes
4
Rating
0
P
Printableseried

Wizard X220s camera mount for Action camera

Same as the original rubber mount, but adapted for a typical chinese action camera. Print instructions 50% infill makes the mount strong but lighter than the original. Print with flexible filament.

Downloads
27
Likes
2
Rating
0
P
PrintablesLucasa77

Flower Tagholder: six on 220x220 surface

Very simple pot or garden tagholder. 6 fits on 220x220 print surface (like my Kobra Go) PETG prints raccomended if used outside.

Downloads
27
Likes
0
Rating
0
P
Printableschouchou

Juniper EX2200C-12P Stand

Vertical stand for EX2200C-12P

Downloads
27
Likes
1
Rating
0
P
PrintablesGustawXYZ

Eachine Wizard x220 RunCam Micro Eagle camera mount

It's pretty tight on Wizard x220,but fits. I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height,…

Downloads
26
Likes
1
Rating
0
P
PrintablesDanny33

modular workshop organiser - box internal dimensions 185x174x220mm

"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…

Downloads
26
Likes
1
Rating
0
P
Printablesune

Sort base for Ultimate router jig (fits on 220x220mm beds)

A shorter base for the Ultimate router jig. Allows printing on 220x220mm Print-beds.

Downloads
25
Likes
2
Rating
0
P
PrintablesFert2711

honeycomb spool 220x220

it's a honeycomb spool

Downloads
25
Likes
3
Rating
0
P
PrintablesTrash Tomeck

Tomeck's 36 zone 220x220mm bed level quick calibration test net v1

Quick calibration test net for bed level check. One layer - 0.2mm layer height.

Downloads
24
Likes
1
Rating
0
P
PrintablesCool

Gorilla quick release plate for Sony WX220 Camera with tripod screw (Gorilla Schnellwechselplatte mit Stativschraube für Sony WX220 Kamera)

Gorilla Schnellwechselplatte mit Stativschraube für Sony WX220 Kamera Projektbeschreibung und Anleitung unter http://cool-web.de/3d-druck/gorilla-tripod-schnellverschluss-platte-kamera-smartphone.htm Video unter…

Downloads
23
Likes
3
Rating
0
P
Printableseried

Wizard X220s Camera Guard (another)

A slighty modified (improved IMHO :P) guard for the x220s camera. Print instructions Category: R/C Vehicles Summary A slighty modified (improved IMHO :P) guard for the x220s camera.

Downloads
22
Likes
0
Rating
0
P
PrintablesFlasheek

Eachine Wizard X220HV Arm Guard

A simple, lightweight, snug snap-fit guard for arms and motors for Eachine Wizard X220HV. Designed to be very easy to print with TPU plastic. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…

Downloads
21
Likes
4
Rating
0
P
Printablesdnshlk

3 Slot Print in Place Watch Box 220x220 Printers Allowed

Added 17cm wrist holders, that was remixed from few model, not only original listing.

Downloads
20
Likes
5
Rating
0
P
PrintablesKotei Koteevich

Fire Goat 2027 #1 140x220 Hueforge

The painting “Fire Goat 2027 #1” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…

Downloads
20
Likes
7
Rating
0

220x220 Buildplates stand

Stand for 220x220mm buildplates. x1 4mm glass x3 1.5mm thick steel or soft magnetic PEI, PET etc. There are two versions with or without hex pattern.

Downloads
19
Likes
0
Rating
0
P
PrintablesSkyline989

Eachine Wizard X220S Gopro Hero3 Hero4 Mount

Full Protection, about 30 grams. 10, 20 and 30deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws Update 16/4/20 added 15deg Version

Downloads
19
Likes
1
Rating
0
P
PrintablesSkyline989

Eachine Wizard X220S Gopro Session - Runcam 5 -Foxeer Box - Caddx Orca Dophin (for TBS ND Filter)

Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)

Downloads
18
Likes
2
Rating
0
P
PrintablesYeen621

HDD Cover & USB-C charger for Thinkpad X230 X230i X230T X220 X220i X220T

I modified the cover to accept two different types of USB-C chargers to make my ThinkPad tablet PC more versatile. I have also made a label for it as a .PDF on an A4 Page. Quick Info: This will only work or only make sense if you're not…

Downloads
18
Likes
5
Rating
0
P
PrintablesAisuNi

heatbed strain releif for generic 220x220

I'm making a 3d print print w/ all the random parts i have left over and wanted strain relief for this 12v 220x220mm heated bed i pulled off an old am8 and could only find ones for the connector types, so i made one for mine w/ the…

Downloads
18
Likes
6
Rating
0
P
PrintablesLucasfrit

Adjustable Rumcam 2 mount for Wizard X220

It is an adjustable Runcam 2 mount for the Eachine Wizard x220. Print Settings Material TPU Infill: 50%

Downloads
18
Likes
2
Rating
0
P
PrintablesZoid

Eachine Wizard x220 stump antenna

The rear end for Eachine Wizard x220 upgraded with TBS Unify and stump antenna. Cut off the end of the top plate is required. Print instructions Printed in XT-CF20 by Collorfabb with installed hardener nozzle E3D 0.4.

Downloads
18
Likes
1
Rating
0
P
PrintablesDamnDan

Sony Bluetooth headphones MDR-ZX220BT tech covers/charms

Covers I made to spruce up my boring MDR-ZX220BT headphones. Used double sided tape to glue those onto my headphones - just to keep it reversible. Printed with PLA on Ender 3v2. 0.2 resolution 100% infill 1 wall

Downloads
17
Likes
2
Rating
0
P
PrintablesAlexandre M.

Lotus S2 Elise/Exige VX220 Side Repeater clip

The retaining clip of my S2 Lotus side repeater lamp broke off. I didn't want to wait or to pay more in shipping than the price of this repeater. So, I design this clip that slides over the broken one and that is hold in place by the bulb…

Downloads
16
Likes
1
Rating
0
P
PrintablesVlada Matena

55x220 mm air pipe 45 deg. elbow

Printed from PETG at 0.2 mm layer height. Heated chamber recommended.

Downloads
16
Likes
1
Rating
0
P
PrintablesValvetVipe

GoPro Mount für Eachine Wizard X220

TPU for flexible, shock-absorbing properties or PETG for a stiffer assembly.

Downloads
15
Likes
0
Rating
0
P
PrintablesDonnie

Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm

Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm

Downloads
15
Likes
4
Rating
0
P
PrintablesSzaman

iFlight XL5 / EX220 GoPro Session pod 45 degrees

iFlight XL5 / EX220 GoPro Session pod

Downloads
14
Likes
1
Rating
0
P
PrintablesBB Brain

Eachine Wizard X220 DJI O3 Air

A cam mount for a Dji O3 Air Unit on the Eachine Wizard X220 some tape is necessary to sunk it up on the post Print Settings Printer Brand: Anycubic Printer: Kossel **Rafts:** Yes Supports: Yes **Infill:** 70% Category: Parts

Downloads
14
Likes
1
Rating
0
P
PrintablesValvetVipe

Eachine Wizard X220 XT60 TPU Mount

Layer height 0,2 - 0,32 TPU 95A.

Downloads
13
Likes
1
Rating
0
P
PrintablesArdutroniques

Modification Eachine Wizard X220s

Ce modèle est divisé en deux parties : Un conduit pour le câble XT60 qui évite que le câble parte dans les hélices et s'abime.(PETG conseillé pour plus de résistance aux crashs Une butée pour éviter que la LiPo ne glisse et tombe du drone…

Downloads
13
Likes
5
Rating
0
P
PrintablesCFMP

Kit réparation phares Opel Speedster VX220

Kit de réparation pour phares Opel Speedster a coller ou a visser en fonction de la version choisie. Pour la colle, la Cyanolit ou préférence epoxy. Pour la version a visser il faut une vis M5 avec tête fraisée diam de la tête 7mm Prévoir…

Downloads
13
Likes
3
Rating
0
P
PrintablesFil_Big_G
Downloads
13
Likes
2
Rating
0
P
PrintablesKotei Koteevich

Cat Neon City 140x220 Hueforge

The painting “Cat Neon City” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…

Downloads
13
Likes
3
Rating
0
P
PrintablesLoohney

Wizard X220 - Minimalistic ESC Cover

Minimalistic ESC Cover for your FPV Quad Print time is about 4 minutes. I've designed a minimalistic solution to keep the ESC's of your FPV Quad save from your props in a crash . The slits on the top will probably help to keep the ESC's…

Downloads
12
Likes
1
Rating
0
P
PrintablesDiego Chaparro

ENDER3 S1 220X220X270

modelo de Ender 3 s1 con volumen de impresión 220x220x270 listo para usar de base en orca slicer tutorial rapido

Downloads
10
Likes
1
Rating
0
P
PrintablesTommy1972

Wizard X220s kabelholder

XT60 Holder to Eachine Wizard X220s Category: R/C Vehicles

Downloads
10
Likes
2
Rating
0
P
Printablescrazy.biker_84

Action cam mount for Reely X220 race copter

Actioncam mount for the Reely X220 race copter. Print Settings Printer: Renkforce RF2000 Rafts: Yes Supports: Doesn't Matter Resolution: 0.1 mm Infill: 25% Notes: I´ve printed this in PLA using 4 solid bottomlayers, 4 solid toplayers and…

Downloads
10
Likes
1
Rating
0
P
PrintablesMattia Prandi

Foxeer Box 2 mount for WIZARD X220S (25°/30°)

Foxeer Box 2 mount for WIZARD X220S, if you want to edit this file there are Fusion 360 files

Downloads
10
Likes
1
Rating
0
P
PrintablesMattia Prandi

Propeller Tool Helper for Wizard X220s

This is a helpful tool for mount or dismount the propeller from Wizard X220S

Downloads
9
Likes
2
Rating
4
P
PrintablesKotei Koteevich

Holo (Spice and Wolf) 140x220 Hueforge

The painting “Holo (Spice and Wolf)” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100%…

Downloads
9
Likes
3
Rating
0
P
Printablesbpul

Stackable Containers by Bndzi REMIX 160x220mm

This is a REMIX of the Stackable Containers by Bndzi. It was resized to 160x220mm

Downloads
8
Likes
1
Rating
0
P
PrintablesTamás Kiss

Display Case for 3D Models – V2 (250x220mm)

Illuminated Display Case for 3D Models – V2 (250x220mm) This display case is designed for the aesthetic presentation of 3D printed figures, human models, and manga characters. Compared to version V1, the following modifications have been…

Downloads
8
Likes
4
Rating
0
P
PrintablesArdutroniques

Paroi Eachine Wizard X220s

J'utilise une stack Speedybee qui est plus grosse que la stack d'origine du Eachine. La paroi ne fonctionne donc pas, étant trop étroite. J'ai donc redessinés une partie de la paroi ,moins longue, mais qui protège les fils. Il faut…

Downloads
7
Likes
2
Rating
0