Suzuki XL7 wiper screw cap
My Suzuki XL7 wiper screw caps were missing, so I designed this simple cap to cover the screws to protect them from rain.
- Downloads
- 21
- Likes
- 2
- Rating
- 0
Counting matching models…
My Suzuki XL7 wiper screw caps were missing, so I designed this simple cap to cover the screws to protect them from rain.
Accurate CAD files of the XL7 frame parts created from measurements and reference scans. Not 100% perfect, but close. This is from the cheap version of the XL7 frame found on AliExpress, eBay, etc., not the iFlight version, so I can't…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
This bullet tray is for a Dillon XL750, it is similar to the original Dillon version
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
Print in TPU, use OEM Screws
For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…
I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…
Dillon XL650 and XL750 clamping toolhead. Requires M3 bolts, recommended at least 20mm long. Version 2: Added 5.2mm wide by 6.4mm deep hold on the underside of the locator to allow for the use of M3 heat-set inserts. McMaster Carr PN:…
This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…
This tool holder was designed to be simple and compact. It holds all the required allen wrenches for servicing a Dillon XL650 More free AzJake projects: https://azjake.com/pages/free-projects Other designs and files are available at:…
This part replaces the half moon shaped spacer on the casefeed support tubing. It is slotted to allow the 1/4" factory bolt to be re-used. It allows for multiple accessories and tool holders to be used. More free AzJake projects:…
This tool holder replaces the spacer on the casefeeder tube and is slotted to reuse the exiting bolt. It fits on the upper bolt. It holds all the standard tools included in the Dillon XL650 Bench tool set. It is built to positively index…
Designed to fit Dillon Precision Casefeeders these easily add male picatinny rails up high on your reloading press. They are a great place to hang primer tube holders or tools. More free AzJake projects:…
Mount for DJI Air Unit O3 Camera. Holes for stands are 6mm Stand-Middle to Stand-Middle are 27mm
Here is a rack I made to store Dillon Precision XL650 Station 1 as well as the casefeed arm bushings. Their are locations for all available arm bushings and locators available on 1/2020. All spots are labeled. More free AzJake projects:…
Calmps between top and bottom plate, no need of screws. Print in TPU Opening for Air in the front
Mount for the Air Unit OEM Antenna. Can be additional fixed with a zip tie, but no need to. Standoff-Mid to Standoff-Mid - 21mm Standoff - 6mm inner diameter
This rack measures 2.5" wide and 8" tall. It has threaded holes that are labeled for the 5 common Dillon XL650/XL750 casefeed body bushings. It also has holes for 8 powder funnels. The alignment tool shown also fits. Decapping pins fit in…
Case for XM74610 ideal diode. There are 2 versions: Top wire (Orange in picture): for when you solder the wire on top of the board. Slim and have no hole for heatsink. This diode should be good without heatsink up to 6-7a in my testing.…
This is modeled after a Glock 26 and dimensionally is very close. I printed it with the slide down in HattchBox Black PLA. This one uses a mount that replaces the half moon spacer washer on the casefeed tube and the pistol slides in place…
Upgrade your reloading setup with our sleek and sturdy Station 1 and Case Feed Arm Bushing Holder, designed to fit seamlessly with your Dillon XL650 or XL750 reloading machine parts. This custom-designed and 3D printed wall-mountable…
iFlight XL7 V2 Long Range SMA antenna mount Print instructions Print Settings Printer: Afinibot A9 Rafts: No Supports: Yes Resolution: 0.2 Infill: 75% Filament: Extrudr TPU Red
Hello everyone, Couldn't find iflight xl7v5 skids so made my owns. They are not perfect, but they fit. Feel free to improve the design with the provided step file Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Both examples hold 5 Dillon XL650 or XL750 Shellplates and are attached to the wall using 2 #8 wood screws or drywall screws. More free AzJake projects: https://azjake.com/pages/free-projects Available printed and ready to use at…
It fits a 25xx motor, with a little spacing from border. Print it on TPU with 15% infill for best shock absortion. Category: Hobby
It fits a 25xx motor, with a little spacing from border. Print it on TPU with 15% infill for best shock absortion. Category: Hobby
Einfache, problemlose und sehr robuste Befestigung an der Hinterachse (bei mir seit 2023). Kann zur Reinigung oder für Unterhaltsarbeiten an der Hinterachse schnell wieder entfernt werden. Material: Fettfänger: Bamboo PET-CF15 Halter:…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
Remixed from IFlight XL7 V2 TBS GPS Puck Mount by grammo For Iflight XL7 frame ( https://goo.gl/Fo1rmg ) Added the mount for the BN-880 GPS, you can fix it with an zip tie. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
I made this support using @mcflyfpv design and adapted it to mount on the iFlight XL7
Remixed from iFlight XL7 Crossfire immortal-t mount by benii With this one you can assemble your vtx antenna on top. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Category: R/C…
XLPower Nimbus 550 Tail Control Guide XL70T04
These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well. Works with the XL650/750 Tool heads. I made the screw holes to work with the 50lb plastic anchors…
Bottom lipo protector for Iflight XL7 frame ( https://goo.gl/Fo1rmg ) should work on XL5 since the bottom its the same. Print on tpu. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 100…
XL7015 PCB Mount for Led Flashforge Adventurer 5M
Gopro Hero 8 Skull Mount for XL6 XL7 XL5 Print Settings Rafts: No Supports: No Category: 3D Printing
I didnt have an air box or intake tube so I drew this in Fusion using images for reference and rough dimensions from a replacment air filter. i dont know if the actual filter media will fit cause i dont have that either. I used foam to…
I made these for my 1976 XL70 they were missing when I got the bike. I didnt have original parts to model off of so these are a best guess from images I found online and measurements off the bike.
I made this to replace the flasher holder on my 76 XL70, probably will work for other years. Printed in TPU, pretty simple, Measured best I could off of the original part that was pretty damaged.
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.