Search results: xlr

Sort order

206 models

Powercon / Speakon / XLR / ??? Splitter box

An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…

Downloads
468
Likes
43
Rating
5
P
PrintablesMakePro

Neutrik D type XLR support

This cable support is designed to prevent damage to cables inside an audio rack by keeping them securely in place during transport and handling. By minimizing movement, it helps maintain signal integrity and extends the lifespan of your…

Downloads
396
Likes
94
Rating
5
P
Printablesroybijster

XLR Numeric Label / Numeric Lettering Plate

I always mixed up the gain knobs on the amplifier with the actual connected cables. To quickly correlate the numbers next to the knobs to the actual cables, I made these labels / lettering plates. The holes match the hole pattern of…

Downloads
161
Likes
27
Rating
0
P
PrintablesAndo Roots

XLR cable comb 2x10

Holds 2x10 cables, hole diameter 7.4mm

Downloads
148
Likes
22
Rating
0
P
PrintablesCharly BEGOOD

XLR Dust Plug

XLR only (not combo) Dust Plug

Downloads
62
Likes
13
Rating
0
P
PrintablesEugen Iosif

Mini XLR chuck for large diameter cables (6-7mm)

hello there, I wanted to build myself a modular audio cable. My problem was that I have a thick (6mm) star quad cable and did not have any chuck to mount the mini xlr with. So I started prototyping a chuck for that purpose and the result…

Downloads
59
Likes
7
Rating
5
P
Printablesxyhbhtt

120mm Fanshroud for PNY XLR8

I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount. The Fanshroud screws into the existing Fanmount Per Shroud you'll need: M3x6mm Countersunk Screw x3 M3 Nut x3 (Optional)…

Downloads
10
Likes
0
Rating
0
P
PrintablesRenba

XLR Jack TRS RCA Cinch Solder Support

My device is also physically sold at the FI7 shop Liège www.fissette.com A Simple Neutrik XLR / TRS Jack 6.3 / RCA solder Support For those who, like me, sometimes have to solder dozens of XLRs a day... This bracket will make your life…

Downloads
1,281
Likes
249
Rating
4.5
P
PrintablesBuchtomil

XLR Cable Label Rings - quick marker

Simple but extremely practical rings for quick labeling of XLR or other audio cables. No more guessing which cable belongs to which channel – just snap the numbered ring on and you’re done. Designed for ≈ 5 mm cable diameter (typical…

Downloads
946
Likes
181
Rating
4.5
P
PrintablesPascalou

XLR 3rd hand soldering helper.

Here is a 3rd hand helping tool to solder XLR on the field, I've been working on a couple of remote gig when it is not possible to bring heavy tools, this is just perfect for me, put it in your bag with a butane soldering iron and you're…

Downloads
942
Likes
141
Rating
4.75
P
Printablesalpine

GoXLR stand (normal and mini)

The print was designed to be flat, stackable and easy to ship. The interface gets raised enough to guide cables below it and the 25° tilt provides better view and access to the controls on a regular desk. To avoid slipping and prevent…

Downloads
785
Likes
62
Rating
5
P
PrintablesAdam Lewerin

Low profile cap Neutrik XX-series XLR

A low profile cap the Neutrik XX-series XLR connectors, fits both male and female. 3mm right angle cable outlet (indexable every 90 degrees), builds 5mm on top of the connectors resulting in 24mm for a male and 29mm for a female.…

Downloads
715
Likes
68
Rating
0
P
PrintablesJiří Sadil

Ethercon - XLR box

Ethercon - XLR box

Downloads
652
Likes
96
Rating
0
P
PrintablesKilobit

XLR Cable Identification Color Ring

Color Ring to mark XLR cables, Neutrik xlr compatible. Print instructions Print 100%, snug fit.

Downloads
590
Likes
119
Rating
5
P
PrintablesTiebie

XLR Neutrik D series blanking plate - blind cover

Cover for XLR or other Neutrik D series holes in a front panel. This version is mounted from behind and does not protrude on standard rack panels. Designed in SolidWorks, source file provided. Instructions Printed on Bukobot 8 V2 Duo PLA…

Downloads
475
Likes
34
Rating
0
P
Printablesallenrowand

XLR short right-angle cap for Neutrik connectors

This plug make it easy to build right-angle cables using Neutrik NC3-X connectors. There are two versions of the cap; this way you can have the cable exit toward the left or right based on your application. These work on male and female…

Downloads
465
Likes
75
Rating
0
P
PrintablesFrenetic Fox

XLR Input Cap

Caps to cover XLR inputs on various devices. I decided to create these after having to put gaf tape on the inputs to keep dust and snow out of the inputs on my Zoom H6 when being used in the field. These should fit any device with XLR…

Downloads
452
Likes
31
Rating
5
P
PrintablesMacek Jazur

XLR protection cap

PETG - infill 60%

Downloads
450
Likes
51
Rating
5
P
PrintablesJordan Anderson

Xlr Label

Adjusted to suit standard neutrik connectors on stage boxes and other hardware.

Downloads
311
Likes
37
Rating
5
P
PrintablesNUeB

XLR Jack Cover (FreeCAD)

Protect your XLR jacks from getting filthy. Printed in PLA, 0.4 mm nozzle, 0.2 mm layer height, no supports.

Downloads
299
Likes
28
Rating
4
P
PrintablesFlobbyDisk

Eurorack Panel for D-Mount Neutrik XLR Connector

Panel based on https://www.thingiverse.com/thing:2055716, added holes for D-Mount Neutrik Style Connectors like XLR or Ethercon or USB

Downloads
296
Likes
32
Rating
5
P
PrintablesMadi

10” Rack Panel for Neutrik D-Series: For XLR and More

A 10" 1U rack panel for Neutrik D-Series plugs, which are commonly used for XLR and more. Screw holes for plugs sized for M3 screws. Rack screw holes sized to accommodate Rackstuds . Spacing between each accounts for the use of color…

Downloads
275
Likes
40
Rating
0
P
Printableskvlasblom

Neutrik XLR blanking plate

I had some openings left over on a panel of the CNC controller casing, which is placed behind my milling machine. We don't want bits of metal flying in there! The “Tight” version of the files have a slightly tighter fit between the ring…

Downloads
271
Likes
39
Rating
5
P
PrintablesVilkku Koo

Xlr Cable Combs

Comb for holding different xlr cables / 6mm cables in place. 6 different designs with 5 different amounts. Q&A Q: Why is the largest one 16? A: The mixer i'm using has 16 xlr ins and outs so no need for more.

Downloads
265
Likes
34
Rating
5
P
PrintablesNick

Low profile right angle cap for Neutrik XLR 5mm cable

Low profile right angle cap for Neutrik XLR 5mm cable This is a remix of hennedo's model to allow for a 5mm cable. I'm using a Neutrik NC4MXX-B Male 4-Pin XLR Cable Connector for a headphone cable and this remix cap fits perfectly for the…

Downloads
256
Likes
25
Rating
0
P
PrintablesFilip Vařecha

XLR cable marker ring

A simple ring marker you can attach to your XLR cable connectors to make pairing them a breeze. Easy to print in big numbers. Stackable - attach multiple rings to a single XLR connector. You can easily reach huge number of color combos…

Downloads
256
Likes
36
Rating
0
P
PrintablesSeaOlympian

GOXLR Mini Stream Deck Mount

A simple, clip-on, mount/stand to place a Stream Deck above a GoXLR Mini. It can print without supports and clips to the hexagonal holes on either side of the GoXLR. It also leaves all of the IO on the back of the GoXLR completely open…

Downloads
244
Likes
21
Rating
0
P
PrintablesEndre Fehn

XLR short right-angle cap – no cutting - threaded and parameterized

This is for Neutrik XLR (male and female, NC3MX / NC3FX) with outside threads. Should you need a right-angle cap for inside threads (NC3MXX / NC3FXX), please check out this great model by @AcEKrystal:…

Downloads
242
Likes
16
Rating
5
P
PrintablesKIL0

Neutrik XLR Labeling Ring

For labeling Neutrik XLR (XX-series) with text I use the clear code rings sold by Neutrik but they are quite loose so I created a balancing piece. I also created my own version of the color coding rings. There are lots of other models…

Downloads
226
Likes
41
Rating
0
P
Printablesaidilmazlan

Sony FX3/FX30 XLR Extension for XLR Handle with Nato Rails

Sony FX3/FX30 XLR Extension for XLR Handle with Nato Rails Tbh I designed this for the reason that I cant afford the Smallrig extension handle cuz i spend all my money on the camera and a 3d printer. I already tested it for months now and…

Downloads
213
Likes
20
Rating
0

Compact XLR connector

Designed for 3mm cable and neutrik connectors

Downloads
211
Likes
42
Rating
5

XLR to RJ45 Keystone Jack adaptor plate

XLR to RJ45 Keystone Jack adaptor plate. It does what it says. Screw on the back of a D series XLR pane hole and push in any Keystone RJ45 socket. Print large side down, There is a sacrificial bridging layer to avoid need for any support,…

Downloads
209
Likes
30
Rating
4.5
P
PrintablesJackalolz

XLR Soldering Station

Ive seen a few options for XLR soldering stations and the remix model was my favourite starting base. I've removed the skulls and replaced the ¼" TRS jack with a 5pin XLR. Printed in PTEG for higher temperature tolerance. Original model:…

Downloads
209
Likes
38
Rating
5
P

DMX XLR socket box

This box is for housing a DMX or XLR socket and mount it to a wall. Print with supports.

Downloads
205
Likes
25
Rating
0
P
Printablesaidilmazlan

90° Cold Shoe Mount for the Sony FX3/FX30 XLR Handle

Just a simple cold shoe mount for the XLR handle that included with Sony FX3/FX30

Downloads
201
Likes
23
Rating
0
P
PrintablesowShredder1988

XLR Charger plug Onewheel XR

XLR Onewheel XR plug. Credits to someone in vescify/floattown in discord

Downloads
196
Likes
13
Rating
2.5
P
PrintablesDavid

XLR Labels

Label your stagebox or mixer inputs and outputs with the names you actually use: KICK • SNARE • TOM 1 • TOM 2 • KEYS L • KEYS R • VOCAL • etc. Designed for clean, consistent and fast patching — especially when you use the same input…

Downloads
189
Likes
19
Rating
0
P
PrintablesScaryfast

GoXLR base with optional wheels and drawers.

This is a base for the GoXLR sound mixer, or anything that fits really. It has holes for optional wheel mounts to let it roll back and forth on your desk surface, and has space below for drawers or storage of other items. I do find the…

Downloads
182
Likes
24
Rating
5
P
PrintablesDavid

XLR Cable Length Identification Rings

These snap-on identification rings let you instantly recognize cable lengths using both color and printed labels . They fit around Neutrik XLR connectors and help keep your audio setup organized during live events, studio work, or…

Downloads
172
Likes
13
Rating
0
P
PrintablesTobias0530

Box for Neutrik D-type and A-type sockets (use for USB, RJ-45, XLR) - can be mounted to Original Prusa Enclosure

Network connector box for Original Prusa Enclosure using Neutrik A-Type or D-Type sockets - suitable for USB and RJ45 connectors (22mm or 24mm hole). The box houses two Neutrik connectors and has two mounting holes spaced 60mm apart so it…

Downloads
170
Likes
24
Rating
0
P
PrintablesFlo Wu

XLR cap for low profile/compact and 90 degree angled use

Works with the Thomann cheap molded XLR cables ("the sssnake XLR Patchcable"). In order to use it one must drill a hole through the metal and the inner plastic structure that holds the contacts in place. The inner ring of the cap fixates…

Downloads
167
Likes
18
Rating
5
P
PrintablesSzymon Oc

XLR Label

XLR plug label Front face - 13x20mm

Downloads
166
Likes
26
Rating
0
P
PrintablesMainzel

Adapterplatte, Kaltgerätestecker, Dmx, XLR

Adapterplatte zum Tausch einer Schuko-Einbaudose gegen eine Kaltgerätebuchse. Passt zb. für DMX Kabeltrommeln usw… Lochabstand: 38×38

Downloads
166
Likes
25
Rating
0
P
PrintablesMEngineer

XLR Cable Organizer

I made this to organize some XLR cables around a Behringer X32 Digital Console in a countertop. I printed 5 of them and put them side by side.

Downloads
159
Likes
36
Rating
0
P
PrintablesTobias

XLR Dust Cap / Portblocker

XLR Durst Cap / Portblocker I Printed it in Extrudr Semisoft TPU Repost original: XLR cap by vitalyu - Thingiverse

Downloads
155
Likes
11
Rating
5
P
PrintablesPhilPhil

XLR Cap Male and Female

I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! XLR Cap for Male and Female cable Protects Cable from dust, water and impact…

Downloads
144
Likes
12
Rating
0
P
PrintablesFlorian

XLR-Case for DIN-Rail - Neutrik D-Style

This is a XLR/D-Style-Case for putting on a DIN-Rail with the cover still going on. In my case used for allowing easy programming access to BMS-installations (KNX/EIB). There is a closed version which uses 4 M3*12 screws to screw on the…

Downloads
132
Likes
14
Rating
0
P
PrintablesGZT project

XLR strain relief

This is a replacement strain relief for a broken original on an XLR jack. Printed from TPU.

Downloads
131
Likes
31
Rating
0
P
PrintablesMatěj Kadlec

XLR short right-angle cap – no cutting

Remix of allenrowand's model. This is the “Top L” variant with cable exiting downwards (opposite of connector lock). Scaling on X and Y may be required to get good snug fit. All info is in original model description but no cutting off the…

Downloads
128
Likes
23
Rating
0
P
PrintablesMkArtz

Goxlr mini stand

This stand is made for goxlr mini it will provide a 45 degrees incline i hope u like it :)

Downloads
124
Likes
13
Rating
0
P
PrintablesBrent

XLR TRS Studio Panel Mount Wall Plate

I built this for my home studio its a 3 Gang 12 Panel mount wall plate for home audio AV studio. Did Inventor Presentation Video for Assembly Instructions. Complete with a cutout Stencil guide you can use when cutting the hole in your…

Downloads
123
Likes
32
Rating
5
P
PrintablesUnseal

GoXLR Vertical stand

A vertical stand for the GOXLR

Downloads
118
Likes
9
Rating
0
P
PrintablesCornbread

Sony FX3/30 XLR Handle Adapter for Cold Shoe Mics

Holds my Deity D4 Mini with no problems, although I'm not sure how well it will holder bigger mics. The mic does wobble a little bit since the original mount has little shock absorbing nubs but I haven't found it to be that big of an…

Downloads
114
Likes
5
Rating
0
P
Printablesgalagor

Adaptador / Adapter micro XLR to 1/4

Adaptador para soporte de micro XLR, del estándar (normalmente usado en trípode de músicos) a rosca de 1/4 y así poder colocarlos en zapata de flash, brazo mágico etc. Print instructions Unassociated tags: 1/4, adaptador micro xlr…

Downloads
107
Likes
8
Rating
0
P
Printablesalekch30

Ethercon - XLR box - tall version

Taller version of the ethercon XLR box - I modified the main box part, but the end caps i made from scratch so they are a bit different than the original model. if You want a 2-tone logo, check out the original model's page. I have not…

Downloads
106
Likes
15
Rating
5
P
PrintablesJ D

StreamDeck-GOXLR Mini Bracket

Bracket to mount the Stream Deck to the top of the GOXLR Mini

Downloads
102
Likes
8
Rating
5
P
PrintablesPetersman

NEUTRIK XLR ring sleeve marker

The ring is only 1mm thick, so the inner diameter 2mm brim is recommended, to prevent bed adhesion loose.

Downloads
101
Likes
25
Rating
0
P
PrintablesCrumpled Glitch

XLR / Network / STI - custom stage box / snake

This is a custom stage box I designed (this is my first ever real 3d model) This is to be used in my workplace, it will be mounted at the front of the event space, cables will be then run up through the ceiling and back into our control…

Downloads
98
Likes
12
Rating
0
P
PrintablesSpankyty

USB RS-485 to DMX/XLR Case

Made this to enclose my DIY Open DMX. It will be used to run my MiniLED moving heads from eBay. USB RS-485 to DMX You can buy this here! https://www.makexyz.com/store/usb-rs-485-to-dmxxlr-case-95eda30fbea0a5ab0e2d973d72049946 Print…

Downloads
93
Likes
11
Rating
3
P
PrintablesGrant962013

beyblade x extra low rush (XLR)

its a rush bit but 3mm lower instead of 2mm lower. recommended to print at 100% infill at a 45 degree angle. burst-proof

Downloads
92
Likes
2
Rating
0
P
PrintablesAdastorm

XLR Cable Clip

A simple XLR cable clip in order to maker ordering cables easier

Downloads
92
Likes
19
Rating
0
P
PrintablesAmperoosky

AKG K240 Sextett MiniXLR Mod

This part allows you to add a MiniXLR connector to a pair of AKG K240 Sextett headphones without permanent modification.

Downloads
91
Likes
6
Rating
0
P
Printablesmartin_pihrt

Neutrik connector holder XLR

MIC1, MIC2, PA-L, PA-R

Downloads
89
Likes
25
Rating
0
P
PrintablesCharly BEGOOD

Combo XLR-Jack Plug

Combo XLR-Jack Dust Plug

Downloads
84
Likes
13
Rating
0
P
PrintablesRobin

XLR / DMX multicore adapter

An adapter to replace multicore by sending it over cat7 network cables

Downloads
83
Likes
17
Rating
0
P
PrintablesJake

Neutrik XLR and PowerCon Strain Relief

Use this on the back of female XLR or PowerCon connectors. I use these on the inside of my pedalboard.

Downloads
80
Likes
9
Rating
0
P
PrintablesLorenz H

Millenium MA-2040 XLR cable clip

Microphone cable clips for Millenium MA-2040 and structurally identical boom arm (cable: 6mm, arm: 10*10mm)

Downloads
78
Likes
14
Rating
5
P
PrintablesVLS1990

HGLRC M100 Mini Arm adaptor for ApexLR 7

HGLRC M100 Mini Arm adaptor for ApexLR 7

Downloads
76
Likes
3
Rating
0
P
PrintablesNemoros

XLR-Switch Box

Made an XLR-Switch Box for 3 XLR Inputs and One Output I used 8 countersunk screws for the XLR-Connectors. The Holes are Standart D-Mount dimentions. The Lid is held in Place by 4x M3 Square Nuts I used this Switch:…

Downloads
76
Likes
18
Rating
0
P
PrintablesTadeas.Grohmi

USB-RS485 case (USB-DMX/XLR)

It's made for the USB RS-485 converter with FT232RL + SN75176. The XLR plugs are from AliExpress. I simply glued the module into the case, and the XLR plug is secured with 2mm screws. The lid is also secured with 2mm screws. Links: XLR:…

Downloads
74
Likes
14
Rating
3
P
Printablesmpanelas

XLR/Ethercon Breakout Box

Here's a video about how to wire these up: https://www.youtube.com/watch?v=gjI9GNob5Ss&t=19s Chassis is simple and easy to work with. It takes 3mm heated inserts. Here are some solderable ethercon connectors:…

Downloads
73
Likes
10
Rating
0
P
Printablesflbdesign

Front tank bracket 17611437000 for Honda XLR XLS 125 1979-1990 Honda

Front tank bracket for Honda XLR XLS 125 1979-1990 Honda Original part Honda: 17611437000 Printing in TPU - PETG - ASA 100% infill

Downloads
73
Likes
10
Rating
0
P
PrintablesKubix_3D

Panel XLR blind for Switch

Exactly what you need to mount the switch in the XLR hole!

Downloads
72
Likes
19
Rating
5
P
Printablesdjos_1475

CNC Case with XLR Sockets for MKS DLC32 v2.x + GRBL_SPD for Makita Routers and a Buck Converter

A more advanced CNC Case with XLR Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita Routers available HERE .…

Downloads
70
Likes
10
Rating
0
P
PrintablesJan_Tschään

Microphone Arm XLR Cable Clip 13x13

This is a simple XLR Cable Clip specially designed for the Microphone Arm from InnoGear . This is the XLR Cable I am using. But I think it should fit for most of the XLR cables. The extrusions of the arm are about 13x13mm and the XLR…

Downloads
70
Likes
6
Rating
0
P
PrintablesOrbiter07

XLR Cable Dust Cover

Dust Cover for the female end of an XLR Cable secures using the built-in latching mechanism on the cable. 2 options hole that allows for Zip Ties or a split ring with string to secure it to the cable and allow for it to remain with the…

Downloads
70
Likes
6
Rating
5

Raspberry Pi + HiFiBerry XLR Streamer with 7" Touchscreen (Wall Mounted)

Items needed: Raspberry Pi 3 or 4 Raspberry Pi 7" Touchscreen HiFiBerry DAC2 Pro XLR Some plastic threading screws or you could add threaded inserts whatever you prefer. Easily adaptable for other DACs by modifying the connection box.…

Downloads
68
Likes
4
Rating
0
P
Printablesrouvenschandl

Neutrik XLR xx-series label/color ring

Labeling/color Ring for Neutrik xx-series

Downloads
67
Likes
8
Rating
0
P
PrintablesFagge

XLR Female Cap

A more robust XLR cap, to protect against dirt & moisture. Lockable & loop for safety string.

Downloads
66
Likes
10
Rating
5
P
Printablesrocketgonzo

Rode VXLR+ Cage Clamp for Camera Rigs

This clamp helps you mount your Rode VXLR+ 3.5 mm TRS to XLR Adaptor to a camera cage or other parts of your rig. It can be mounted using one or two ¼ inch cage screws (although you prevent twisting by using two). Unfortunately, there…

Downloads
65
Likes
10
Rating
0
P
PrintablesSchnu

GOXLR Desk Stand – Compact, Stable & Precise Fit

This GOXLR Desk Stand provides a secure, low-profile mounting option for your GOXLR. Designed with tight tolerances for a snug, wobble-free fit , it’s ideal for keeping your audio setup clean and stable. 🛠 Benefits: Tight, stable fit…

Downloads
64
Likes
6
Rating
0
P
PrintablesSimple3D

Grin Cycle Satiator XLR to Bosch Battery Converter

Grin makes the Cycle Satiator. It's a universal programable battery charger that can supply up to 63V at 8A. I wanted to use it with my Bosch 36V eBike battery but they didn't have a conversion cable (probably because the Bosch Battery…

Downloads
64
Likes
5
Rating
0
P
Printablesmetamech

Neutrik XLR connector mount

Hide screws mount panel for Neutrik XLR A series (AA series) connector.

Downloads
60
Likes
4
Rating
0
P
PrintablesJiří Sadil

XLR Y SPLIT

XLR Y SPLIT

Downloads
57
Likes
13
Rating
0
P
PrintablesAustin Triggs

XLR Cable Clip for Microphone Arm

Keep your microphone setup clean and professional with this 3D printed cable clip designed for low-cost scissor mic arms that use 10×10mm square tubing. The clip snaps securely onto the top of the arm, while the XLR cable presses into the…

Downloads
57
Likes
7
Rating
0
P
Printablesdom.3D

Neutrik Rackblech Adapter - XLR Einbau

Adapter für Neutrik A-Norm Buchsen um sie in ein D-Norm Rackblech zu montieren.

Downloads
55
Likes
2
Rating
0
P
Printablesspengineer

GoXLR Console Cover

Printable cover for the full size GoXLR, meant to be printed in a single piece on a large printer. I suggest using PLA or PETG to avoid shrinkage and warping. Similar to the Deckcover , but not see-through and not as contoured. Has…

Downloads
55
Likes
8
Rating
0
P
PrintablesBennet

universal Xlr-mic Tablemount

This clamp is designed to be used with any Xlrmice you have. It only holds the xlrcabel so its not as stable a custom mold for your microphone. Print it strong with 3-4 layers and support.

Downloads
54
Likes
18
Rating
0
P
PrintablesLighting

3pin XLR pájecí pomocník

Držák a pomocník pro pájení konektorů pro dmx a audio kabely doporučuji tisknout z co nejvíce teplotně odolného materialu 3pin XLR verze

Downloads
54
Likes
11
Rating
0
P
PrintablesJohannes

XLR connector Marker-Rings Left - Right

PETG better than PLA for Flex. a Little support for the L and R cutouts can help. The Noname Pair is for the “Conrad” Type Budgetconnectors, slips over the Cablesleeve The other one for Neutrik-Connectors replacing the standard black Rings.

Downloads
48
Likes
16
Rating
0

Female XLR socket cover

Additional version with hook to keep on cable when in use Part of bigger collection: https://www.printables.com/@MichaMietlins_755343/collections/3185389

Downloads
48
Likes
5
Rating
0
P
Printablesmllunanox

Hifiberry DAC2 PRO XLR Case

Caja para Raspberry Pi3B con Hifiberry DAC2 PRO XLR

Downloads
45
Likes
3
Rating
0
P
Printablesmarkoblaster

Funwheel easy access controller box - gx16 button and footpad, cannon core motor cable, xlr charge port

get your vesc built up in a fungineers easy access printable box, i usually print these in asa.

Downloads
44
Likes
3
Rating
0
P

XLR/Dmx tester With Battry

a xlr/dmx tester that is made out of 2 parts the one with the battery and switch (this one) and the other end with the LEDS. when you want to check if a cable is good you connect both ends and turn it on. when te 2 leds light up it is…

Downloads
44
Likes
11
Rating
0
P
Printablesottojo

XLR to mini-XLR Adapter case

XLR Receptacle: Hicon HI-X3DM-M mini-XLR Receptacle: Neutrik Rean RT3 MP Prints without support, needs 2 M3 screws Category: Electronics

Downloads
43
Likes
7
Rating
0
P
PrintablesSegebodo

XLR Plug Strain Relief (Replacement Part)

This is a replacement part for the strain relief in an xlr plug. Some XLR Plugs have crimped strain reliefs which can not be reused (e.g. “Rean” branded xlr plugs, as seen in the bottom part of the last picture). This replacement part is…

Downloads
42
Likes
12
Rating
0
P
Printablesdom.3D

XLR-Buchsen-Halter 19" Rackblech

Passt perfekt für 1m Cordial Kabel. XLR-Buchsen rasten ein

Downloads
42
Likes
14
Rating
0
P
PrintablesJetpack Rider

GO-XLR cover - Flat surface

Found only one cover out there and I am sorry for those who tried to print that and realized it wasn't good. Try this one instead. Printing mine RN will update with photos.

Downloads
41
Likes
2
Rating
0
P
PrintablesSoulOfNoob

ESPHome DMX XLR Snap Box

I wanted a nice and rugged enclosure for a Wemos D1 Mini that can control DMX fixtures via ESPHome/HomeAssistant and does not have to be powered directly from the ESPs USB port which breaks easily. So i created this box which holds a cut…

Downloads
40
Likes
13
Rating
0
P
PrintablesDLQFPV

ASBO XL and XLR TPU Parts

A collection of Parts for the ASBO XL and XLR drone frames from DLQFPV and MambaFPV. All 3mf files have been plated as I print them. I am also including STEP files of some parts for modification and remixing. Please feel free to share…

Downloads
39
Likes
2
Rating
0