1 / 2
XLR Cable Clip for Microphone Arm — image 1
1 / 2

XLR Cable Clip for Microphone Arm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Easily clips to the arm then the cable clips in and holds well. Compatible with 6.2mm diameter cables.

Rating
0 / 5
Likes
7
Downloads
57
Makes
0
Views
353
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Keep your microphone setup clean and professional with this 3D printed cable clip designed for low-cost scissor mic arms that use 10×10mm square tubing. The clip snaps securely onto the top of the arm, while the XLR cable presses into the channel on top, keeping everything neatly routed and out of the way.

This model is designed around a 6.2mm diameter cable and provides a firm hold when printed in the right material. PETG or another rigid  filament (not PLA) is strongly recommended. PLA is not ideal as when flexed onto the arm it won’t fully spring back, resulting in a loose fit.

 

Support my work:

PayPal Donation: https://www.paypal.me/disizitstudios

Cults 3D: https://cults3d.com/en/users/ItsFilamental/3d-models

Tags