1 / 2
XLR Cable Clip for Microphone Arm — zdjęcie 1
1 / 2

XLR Cable Clip for Microphone Arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easily clips to the arm then the cable clips in and holds well. Compatible with 6.2mm diameter cables.

Ocena
0 / 5
Polubienia
7
Pobrania
57
Wydruki
0
Wyświetlenia
353
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Keep your microphone setup clean and professional with this 3D printed cable clip designed for low-cost scissor mic arms that use 10×10mm square tubing. The clip snaps securely onto the top of the arm, while the XLR cable presses into the channel on top, keeping everything neatly routed and out of the way.

This model is designed around a 6.2mm diameter cable and provides a firm hold when printed in the right material. PETG or another rigid  filament (not PLA) is strongly recommended. PLA is not ideal as when flexed onto the arm it won’t fully spring back, resulting in a loose fit.

 

Support my work:

PayPal Donation: https://www.paypal.me/disizitstudios

Cults 3D: https://cults3d.com/en/users/ItsFilamental/3d-models

Tagi