138 models
The Amazfit Bip 6 uses a small magnetic USB-C charging adapter that clips onto the back of the watch. Unfortunately the magnet is fairly weak, so the charger can easily shift if the watch moves or if the cable pulls slightly on the…
Spare plastic loop for Amazfit watch strap. Inner dimensions: 24x6mm
Falls eine der Finnen kaputt geht
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Jedná se o otočný držák na hodinky Amazfit GTS 3 s možností přidělání na Xiaomi lampu Mi…
L'une des plus belles pièces que j'ai jamais imprimée. A imprimer en grand format pour révéler tous les détails. Ajouter quant même un support sous la base.…
Amazfit T-rex 3 watch stand with built-in charger had printed it on my Ender 3 print settings - print height - 0.24 infill - 15% wall - 3 bottom - 4 top solid infill - 4 material - galaxy blue PLA (I know it is purple ) support - organic…
This is a stand made for the Amazfit GTS 2 mini smartwatch. It print correctly on the side, without support, with 0.2mm layer height. The base of the stand is a bit too light, mine is double face taped on my desk. Made with onshape :…
This is a charging stand for the Amazfit GTS smart watch. You may need to lightly sand the hole where the charger pushes in from behind to make it a better fit. It needs to be tight but not so much it damages the charger. It will depend…
Fits for the available charger from AMAZFIT smartwatch brand. 0.2mm layer height and some small area support is necessary (print orientation as shown in the uploaded .stl file)
From thingiverse https://www.thingiverse.com/thing:5636189
Quick and easy charging stand for Amazfit T-Rex Pro watch. Other Amazfit watches should work too, if they share the same charger. Confirmed models by community: T-Rex (just 90° rotated) Amazfit Bip U Pro Smart Watch T-Rex 2 Dissasembly:…
Charging Holder for Amazfit T-REX 2
Charger stand for smartwatch Amazfit gtr3
A stand that ensures your smartwatch is always in its place and your charger never gets lost. The charger fits perfectly into the opening, keeping it securely in place when removing the watch. However, if you need to take it on a trip,…
This is a charging stand for the Amazfit T-rex 3 smart watch.
The remix is a PrusaSlicer project with the original STL including negative volumes. The negative volume of the charger is provided as a step file. The negative volume is crudely measured. I have omitted curved tangents, bottom curvature…
Подставка для зарядки часов Amazfit Balance
A little holder for the watch :) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Slim3D PLA Dark Green Category: Other
This fits the charger for the amazfit gts 3 for easy charging
Sturdy stand for Amazfit T-Rex v1 smartwatch or watch with similar charger type. Use supports only under cable guide, preferably organic
Amazfit gtr 3 pro stand. 15% infill. No support or brim needed. Print time: 2:50 hours
En This stand for charging smart watch is primary made for amazfit t-rex 2. It is compounded from 3 main parts: base, support and charger holder. Charger holder and support are connected by screw M4x10-12mm with countersunk head. Support…
With inspiration from other stands on printables, I took my stab at modeling a new stand in Fusion 360 for her new Active 2 Amazfit watch.
Add parametric *.stp file. Print Settings Printer brand: Flying Bear Printer: Ghost 6 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15 Filament brand: Hi-Tech Filament color: Black Filament material: ABS
This is only adapter for Amazif T-Rex watch. Original Dock station is here: https://www.printables.com/cs/model/342610-universal-smartwatch-dock-apple-google-samsung-ama
Thank you Casper_FH for the nice Desinge. I Remix it for my Amazfit Balance 2.
This is a smartwatch charging stand/dock for Amazfit charger type B. According to Amazfit website, the charger is the same for all those watches : Amazfit GTR 4, Amazfit GTS 4, Amazfit GTR 3 Pro, Amazfit GTR 3, Amazfit GTS 3, Amazfit GTR…
I made a very narrow and round edge loop band to keep the band safer without having annoying square/too high edges. Printed in TPU Category: Accessories
I designed a charging stand for the Amazfit Bip U Pro. It will probably fit the Bip U as well but I do not have one to test. Print on its side with no support. Also works for the GTS 4 .ini as it has the same charger. Tested working.
Bit unusually shaped charger for Amazfit Balance and all the other watches using the same charger. From side, it looks like a bit like a swan, so it got its name. Watch should fit nicely at the “head” of this holder and back can be used…
The little strap loop that comes with the Amazfit Bip keeps slipping off and it is annoying. So I designed this one that will poke into one of the notches to stay in place. Print instructions Print Settings Print using TPU or Ninjaflex.…
This is a Charging-Stand for the Amazefit GTS Required are 4x 2,5x8mm spax screw
Die Aussparung passt für das originale Ladekabel
Amazfit Active 2 Charger Holder
Charger Stand for AMAZFIT T-rex 2 (3 piece) m2.6*8mm flat-head wood screw. Print Settings Printer Brand: ELEGOO Printer: ELEGOO MARS 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Filament: ALL PLA or PETG ALL…
Horizontal Support for Amazfit Band 7 using the original charging cable. 20% infill tree support 3h and 22g used
After trying a bunch of smartwatches I decided to go back to Amazfit Bip. It is an amazing timepiece no other could compete in terms of battery life. The only reason I was trying the other watches is that I never was quiet happy with…
You will need 2 3X16 screws for assembly.
Amazfit Active Max Charging Stand / Holder
Stand for amazfit bip 3 watch, it may be suitable for other amazfit models. Print with automatic supports on organic trees. Stand para reloj amazfit bip 3, es posible que valga para otros modelos de amazfit. Impirmir con soportes…
Amazfit T-Rex 2 wristband free loop replacement. Print with TPU, full perimeters. Try experimenting without supports. There are two versions of free loop wit inner pin, one with chamfered inner pin for easier printing without supports. If…
If you like it, you can buy me a coffee ☕ for just 1$ NOT INTENTED FOR ILLEGAL ACTIVITY Basic printing settings: Support: yes Nozzle: 0.4 mm Layer height: 0.12 mm Material: PLA 1.75 mm Printing sped: 100 mm/s or less
remixed to fit an amazfit band 7 watch base of the stand is larger than the original
Did not want to wait days or weeks for a replacement (Or pay money ;-), I like to pay with time)- so obviously I made it by my self. Printed in TPU
Holder and charging station for AmafFit GTR3. I recommend filling the stand more to make it heavier and the watch doesn't tip over. leg supports only I recommend gluing the parts together Enjoy! Print Settings Printer Brand: Creality…
This smartwatch stand can house the magnetic charger of the Amazfit GTS 2/2mini. I designed it specifically for the Mini because the ones I found on Thingiverse were too big and cumbersome and I wanted a more compact design. I included a…
Nice and clean stand/charging dock for the AMAZFIT GTS. Charging connector is just glued in the stand.
Stand for standard charging Amazfit, only the stand is required for assembly, everything is assembled very tightly.
Elevate your Amazfit Balance watch charging experience with this sleek stand, featuring a built-in tray for added convenience. Designed with a hollow interior to neatly route the charging cable, it includes a discreet rear hole for a long…
It’s a charging stand for the amazfit BIP-3 smartwatch
My watch's band retainer got loose after a while and kept moving around. This design locks on the band's holes with the protruding piece, so no more random moving. 16/03/2026: Added a 2nd version, taller, and with modified "pin". The goal…
Print like original model.
Skadis mount for Amazfit T-REX 3 charger
Split to allow for flat printing, amazfit gtr mini and t rex 2 chargers. even though they look very similar they differ. make sure to lay flat before printing!
Soporte de carga valido para los siguientes modelos: Amazfit GTR 4 | GTR 3 | GTR 3 Pro | GTS 3 | GTS 4 | T-Rex 2 No necesita pegado aunque se puede pegar,las piezas encajan a presión y el cable queda oculto en todo momento en la estructura.
Video link: https://www.youtube.com/shorts/Gr3IlYEjcjs
First version of the model, adapted from hapklaar's model from thingiverse. link to the original (for right-handed people) https://www.thingiverse.com/thing:5263254 printed on Alfawise U30 pro Layer height: 0.15 infill: 20% supports:…
Stand for Amazfit GTS 2 mini smartwatch. It is divided in two parts using magnets. This is an easy way to disassemble the charging part and carry with you.
2 part charging cradle for Amazfit GTR4
This strap is substitute for original strap retainer for amazfit smart watch. It will help to keep the strap is place. My watch - Amazfit GTS 2 mini Printing: 2 paramiters (no infill) layer height 0.15 mm filament TPU or other flex
Stand for charging your smartwatch, designed for the Amazfit Active 2 but easily adaptable for other chargers. I am including the STEP file in case anyone wants to modify it. To avoid using too many supports during printing, I have…
Watch holder for Amazfit GTS, it's a holder for watch a charger.
I wanted to replace my watch band, now it's printable! You can find Strap Holder here https://www.printables.com/model/1044343-tpu-watch-band-strap-holder-keeper-loop-retainer-e Reuse all non-plastic parts from older strap. I recommend to…
How annoying can it be that the band on your wristband of the amazfit constant slips off! Well.........we just fix that! Perhaps it fits other bands?? This is the smallest thing I ever made but it did took some fiddling to create it. The…
Dart Zone Nitroshot Blitzfire2 Mods T-Pull + Printed Pin Rear Sight Insert for improved aiming Bottom Rail Cover for some additional color accent Spring Spacer (for the stock spring) All mods can be easily reversed if desired.…
This is minimalistic Amazfit GTR3/GTS3/GTR4/GTS4/T-Rex2/Cheetah charging stand. Original model was created for round Mi Band charger. I recreated the similar model from scratch when I have switched to Amazfit GTR3. Requirements: M3x12mm…
Minimalistische Sitzfiguren – Modernes Deko 3er-Set
Amazfit GTR3 Charge Dock for HSW ( https://www.printables.com/model/152592-honeycomb-storage-wall ). Can be used with Amazfit chargers similar to this model.
Amazfit GTR 4, GTR 3, GTR 3 Pro, GTS 3, GTS 4, T-Rex 2 charger mount. Holds the magnetic end allowing to just pop the watch on it. Has a tab with a hole to screw it down to whatever you wish
Just a little stand I threw together from a part I recreated for my Dad after the place that originally sold this design stopped making them. Edited to fit the Amazfit GTR 2 charger. Printing it laid down needs the least amount of support.
Simple dimensionally accurate model of Amazfit Balance 2 to “try it on” before buying / get a feel for the size
Modelo creado en ONSHAPE para facilitar la carga y descarga de las bobinas UNIVERSAL 3D de xyz filaments, ya que las bobinas de cartón no le sientan muy bien al AMS de bambu. Encaja perfectamente en las hendiduras con el fin de adaptarse…
Hi everyone! I couldn't find a suitable charging dock for my Amazfit GTS 2e, so I created my own. Please excuse any design flaws; this is the first time I'm sharing one of my designs publicly. I created it because there were no existing…
This is a drop-in barrel adapter for the Dart Zone Blitzfire X2 that I designed so I could put my other 3D-printed barrel cosmetics onto the end of the blaster. It requires opening the blaster up and may require some sanding and minor…
Fraesschablone Netzschalter / Netzfilter - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich 2 polige Netzschalter bzw. Netzfilter eingebaut. Abmessungen 47mm x 28mm Abstand vom Rand bis Aussparung: ca. 45x45mm Ecke Platte…
Print it on the left side with suppports only on printbed. Depending on the printer, scale it up by 1-2%. I didn't and it fits neatly
Replacement Amazfit Bip U strap block
This build fits the Amazfit BIP 6 Smart Watch. The Amazfit charging pad fits snugly in the nook of the top piece. I made this because I got tired of having to find a place to charge my smart watch that is stable and isn't in the way.…
This is a Remix of an Amazfit GTS2 Mini stand to fit the Honeycomb Storage Wall
Fraesschablone Netzschalter / Netzfilter - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich 2 polige Netzschalter bzw. Netzfilter eingebaut. Abmessungen 47mm x 28mm Abstand vom Rand bis Aussparung: ca. 60x60mm Ecke Platte…
Print using TPU material without requiring any support structures.
The handle consists of two parts, you need to use glue to connect both elements.
Stojánek na přivrtání pro nabíjecí stanici hodinek.
Printed on Ender with 0.2 layer height, no supports needed, PLA material, 25% infill.
I'm a humongous fan of the game Warframe, so I had to try and recreate one of my favorite weapons as a cosmetic mod for a dart blaster. This kit is the Stubba, and is meant to fit directly onto the Dart Zone Blitzfire X2. Printing…
can be used to install 20mm generic straps for Amazefit Trex watch
An elegant stand to hold the Amazfit Active 2 charging puck, to turn it into a fancier charging stand. Model Features: Hole to snugly fit the Amazfit active 2 charging puck. A cut-out on the side of the hole for inserting the USB-C cable…
Base para smartwach Amazfit A2017 que consta de dos piezas que hay que pegar con cualquier tipo de pegamento. En el interior de la base se sujeta a presion la base de carga del smartwach.
You can modify the model in model VarSet, or just ask me in the comments to upload a correctly sized one
Just a little stand I threw together from a part I recreated for my Dad after the place that originally sold this design stopped making them. Edited to fit the Amazfit GTR 1 charger. Printing it laid down needs the least amount of support.
Print instructions: Prusament PLA or PETG Infill: 15% Supports: No Settings: 0.15 mm balanced Speed: Reduced
It uses standard Amazfit charger and solves issue where it was very easy to disconnect it while charging. Charging station allows to use watch while it is charging, see notifications etc. It has nice cable management solution, where you…
I bought the screen protector From Alliexpress but it broke. I immediately designed it in the Fusion 360 and of course it fits like a gloveeeee Category: Sport & Outdoors
This is a fastener for a Amazfit Pace stock belt. I lost mine while running and design another one. It should work fine for another belts of the same dimensions. I found that 2mm is too thick for me and made a 1mm version that is strong…
This 3D printable model is designed as a charging mount for the Amazfit Balance 2 XT smartwatch , specifically intended to be installed under a desk for a clean and space-saving setup. The mount securely holds the charger and allows cable…
