Counting matching models…
This project made it to official Prusa YouTube Channel They had no spare LEGO plates to insert into holes, so on video project is not completly finished, but overall you can see at least how the printed parts are made 🧡 Before you go…
This is a set of pieces that can be used to recreate a Clone Trooper, 501st Legion figure at 500% scale. This figure was released in 2020 and included in two sets between 2020 - 2022. All of the stl files needed to create this have been…
If you're reading this I'm going to assume you're interested in joining or are already in the 501st Legion. Please log in and read my build thread on FISD for full details:…
This case was designed for ESP-01S Relay v4.0. The case include 2 mounting holes for M3 bolts. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: ESUN PLA+ Orange…
This is a case that can be used as a base for different enclosures for a simple relay combined with a ESP01 (see link at the end). Easy to customize using SketchUp 1.5mm walls Cover fits the enclosure precisely. 2mm extra on the side of…
Overview The 501st Legion - Vader's Fist is a fan-run costuming organization that requires costumes to be screen-accurate. Their costuming database contains specifications of how the Imperial Officer Rank Bar should appear. Rank bar…
Needed another peace of bleed block for my Shimano SLX brakes (M675) so just printed it. Should fit all brakes using G01S and G03S pads. List bellow found online, tested on M615 BR-M987 - BR-M615 - BR-R515 - BR-M985 - BR-S700 - BR-R315 -…
A replacement hard disk drive cover for X200-series Thinkpad laptops (X200 X200s X201 X201s). No raft or support needed, the horizontal notch might need a little bit of cleanup after print to properly fit. Category: Parts
This is a compact, ventilated, snap-fit and quick-to-print case designed to protect your ESP-01 or ESP-01S with relay module. It fits a single relay, making it ideal for smart home appliance or lighting applications. Included are a solid…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Clone Trooper…
This is a DIN Rail mount for an ESP 01(S) including the standard relay module for it. Depending on how the print comes out, this will either tightly fit or the module can slide out itself. However, you will always be able to align it on…
Brake pad spacer for Shimano brakes. Should work with all model using A01S/M06 pads. To be sure not push out pistons with wheel out during transport, washing ... No so detailed as http://www.thingiverse.com/thing:855454 but will do the…
The g-code was sliced for 5 color changes (White, Black, Red, Yellow, then White again). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.
101st Airborne Patch Plaque that I designed for going away gifts or wall art. I hope you enjoy!
A box for your ESP01 relay module. Has holes for all the cables and the reset button. Includes a snap fit cover. Everything fits very snuggly, so there's a tool hole at the bottom so that you can remove the board from the box if needed.
You can use these pads if you don't have a better replacement, for example to ride to the nearest bike shop to buy new metal break pads :) Compatible with Shimano BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465,…
This base replaces the original one found on the NP-01S 4K in order to save up to 9g. Please keep in mind that the buttons on the bottom of the PCB are hard to reach after installation. Feel after installation is close to stock, but…
A small case for the ESP-01S WS2812 RGB LED Controller Module . All hail the Aircoookie !
The case is designed so that the module is not accidentally shorted by something that lies on the table and conducts electricity. A very useful thing. Please feel free to call. I will be pleased with your good assessment. Link to device…
Can be printed without any changes, original is in PLA.
Parts used: 1x ws2812 led ring with 24 units 1x esp01s 1x ws2812 esp01s to ws2812 adaptor unit Firmware: ESPHOME Configure the led ring with neopixelbus Here is an example that works:(Only the light section of esphome configuration file)…
Just a basic keychain design based on a bigger project we have been working on. Works perfectly with 25mm keychain rings. Print instructions 0.15mm layer 218 nozzle 60 bed 20%infill
The next elite unit has arrived: the legendary 501st Legion , also known as Vader’s Fist . Clad in iconic blue and led by Anakin Skywalker and Captain Rex , this squad has fought across the fiercest fronts of the Clone Wars, from Umbara…
full files: https://www.etsy.com/listing/1503336118/zs-n1-3d-printed-asymmetric-wireless assembly instructions for full mouse: twitter: https://twitter.com/ZoroSeerus
I didn't see it directly but my jigsaw was crooked due to two holes being drilled non-horizontal internally. It resulted, at first, in my jigsaw cutting into the plate and ended up shattering it completely after some use. I remade the…
This is just the right hand side part, you will need the case body and left hand side from the original model, and the clip, if desired.
The Fusion file was corrupted. The STEP I recovered to export should open but it's scuffed. Sorry. There is no soldering needed. I designed it to work with a triple A battery in lieu of having to solder a bit and using a different one.…
NOTE: I am still working on the RAMPS 1.4 config file with Marlin 1.1.0. Currently the printer does move around and extrude slowly, but not print worthy just yet. Testing parts to upgrade my 101hero from its gear reduction steppers to…
Just a quick design in Fusion360 to create a hanger to hang my Hubsan 501ss on the wall
Gopro mount for Hubsan H501s Infill : 30% Support : Yes I use PLA i thing it is good with a ABS and PETG
Added USB-C connector board for power, requires soldering!
1x1 tray with single opening for more combinations of storage
Bleed block for Shimano brakes using A01S/M06 pads. List bellow found online, probably not full and can fit to other brands too. Shimano BR-M975, BR-M965, BR-M966, BR-M800, BR-M775, BR-M765, BR-M665, BR-M601, BR-M595, BR-M596, BR-M585,…
I needed case for the wifi garage door opener I made from an ESP-01 and a relay module. Case has slots so you can mount it to a cable or other item with cable strapping or cable ties. No support needed.
A stand for the N1201SA vector impedance analyzer.
After multiple prototype where I put the sensor and the Esp in the same box, I found out that even with many walls between them the heat from the voltage regulator would make the sensor read 0,5 to 2 °C more than a sensor in the open air.…
This is an adapter so you can hook up the FumeClear FC-2001S to the exhaust of the Elegoo Centauri Carbon. The fume extractor can be found HERE If you do not like this option i have created a replacement top for the FC-2001S so it can…
Cap can be printed in Vase Mode. I removed the LED (Resistor) on the Neopixel Board (way to bright). The one on the ESP is aligned with one RGP LED Ring. So the Status (on/off) of the ESP can also (not as Bright) been seen in one Segment…
A simple 1:10 model of the Klipsch Reference R-101SW subwoofer.
2 Versions of this lid. The version with the fins only has them for the purpose of making the hose coupler stronger so it doesn't break as easy when using a hose clamp on it while keeping air resistance to a minimum. Best way to print is…
This keychain was inspired by a bigger project we have been working on for a while and will be used as a giveaway at future Maker Faires and STEM events. It woks perfectly with the Paxcoo 200Pcs Split Key Rings Bulk for Keychain and…
I build this Device so my daughter could send “cannot sleep” messages to our Phones. DC-DC Modul: https://shorturl.at/Lm2Zz Aliexpress The ESP is flashed with Tasmota: https://templates.blakadder.com/ESP-01S.html Integrated “Nightlight”…
The Timemore Whirly 01S coffee grinder does a nice espresso grind but if you have an espresso machine with a 54mm portafilter, like the Breville Bambino Plus, using the two together can be very messy. The Whirly has a grinds collection…
A printable replacement for the Subaru floor mat retainer: the hook that holds the floor mat in place, with a pin for the mat's eyelet and a clip that pushes into the hole in the car floor. OEM part numbers: J501EAJ000 (EU) / J501SAJ300…
This is a rebuild of the Secumar automatic to manual clip to lock the trigger when the automatic trigger pill is removed. When printed in PETG its about as strong as the orignal and only needs a brightly colored marker to externally…
Simple interface attachment for EPSON VT6-A901S industrial arm with spacer for mounting vision accessories and a simple interface for attaching custom end effectors. Item Material Support Brims Count Spacer Rod PLA-CF No No 2 Mounting…
This is a set of pieces that can be used to recreate a Clone Trooper, 501st Legion figure at 500% scale. This figure was released in 2020 and included in two sets between 2020 - 2022. All of the stl files needed to create this have been…
This is an adapter so you can hook up the FumeClear FC-2001S to the exhaust of the Elegoo Centauri Carbon. The fume extractor can be found HERE If you do not like this option i have created a replacement top for the FC-2001S so it can…
2 Versions of this lid. The version with the fins only has them for the purpose of making the hose coupler stronger so it doesn't break as easy when using a hose clamp on it while keeping air resistance to a minimum. Best way to print is…
I needed case for the wifi garage door opener I made from an ESP-01 and a relay module. Case has slots so you can mount it to a cable or other item with cable strapping or cable ties. No support needed.
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
The Timemore Whirly 01S coffee grinder does a nice espresso grind but if you have an espresso machine with a 54mm portafilter, like the Breville Bambino Plus, using the two together can be very messy. The Whirly has a grinds collection…
This project made it to official Prusa YouTube Channel They had no spare LEGO plates to insert into holes, so on video project is not completly finished, but overall you can see at least how the printed parts are made 🧡 Before you go…
Holder for the ESP-01S relay module. The bottom feature's a hollow for wires in order to use the other 3 available GPIO PINS. Mounting requires a 3m bolt 6-14mm, a nut and nylon washer. The PCB mounts flush if the pins are no longer than…
Had bought a bunch of these that were unceremoniously packaged so I made this little holder for them years ago, STEP and .f3d files are included in case you wanted to use the hole spacing patterns to make a gridfinity version or something.
Simple ESP-01 Case with 2 Wago Clamps 221-413 This case was used in https://community.home-assistant.io/t/making-led-plantlight-smart-with-esphome/915483
Remix of ESP-01S Relay Case by engineers_alter_ego . Widened to fit all electronics inside, a space for a micro USB port, and a holder for an LED light that I had lying around. Category: DIY
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
Made the hole for the motormount bigger to change the plates if needed. The plates are 11cm and 18,5cm in diameter. Category: 3D Printer Accessories
The case of one of the smallest controllers, which can easily be lost among office papers.
Pretty much what it says on the tin. Should also work for F-401x. This button will simply fall off if the clear cover over the dials is removed or otherwise comes off, and replacements are unobtanium. This print requires a decent degree…
With this box you can install Home Assistant Glow on an esp-01s board powering everything directly from main power of your house. From original setup of the Glow I removed the status led because I don't need it, but it can be readded…
-I originally made this for my step dad for his ESP-01S he needed access from the bottom for two thermostats to control when a fan would turn on in the attic to ventilate the hot air I unfortunately do not have too much electrical…
One of the door retainer clips on my P101S broke when I was trying to close it. This should be a drop in replacement. It prints perfectly flat on the bed.
![Actually accurate Esp8266 (Esp01s) Temperature sensor using ds18b20 [Tasmota/EspHome]](https://media.printables.com/media/prints/279448/images/5649478_1530bba2-be3c-4b75-83c3-65522573e3dc_282046f2-afd2-424a-bf0c-cdabdbfa6927/screenshot-2024-01-13-alle-213022.png)
