Search results: 039

Lego Compatible (3039.dat) Slope Brick 45 2 x 2

This model is compatible with the lego system.

Lego Compatible (90398.dat) Minifig Statuette

This model is compatible with the lego system.

Lego Compatible (32039.dat) Technic Connector (Axle/Bush) Type 1

This model is compatible with the lego system.

Pottery rib tool #039

I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…

32039-Technic Axle Connector with Axle Hole

32039-Technic Axle Connector with Axle Hole

Lego Compatible (90392.dat) Minifig Headgear Helmet Spartan Warrior

This model is compatible with the lego system.

Playmobil 094039 Crane Winch

The son of a friend of mine broke the original winch on his Playmobil Crane (Model 4036). Unfortunately, the parts are no longer available from playmobil. So i took it to replace the parts with 3d printed versions. The winch prints…

LEGO 14417 6039479 plate 1x2 with ball

My kids lost their lego. So I drew them a new one in f360. I also included a step. file if anyone wants to correct the tolerances. Print in PETG

Lego Compatible (90396.dat) Minifig Hair Female Mid-Length Wavy with Center Part

This model is compatible with the lego system.

dwarf-cover-connector for Prusa XL Dwarf Cover by @Spengilang_312039 bent open by 20 degrees

no supports needed To fit the cables in, push back the wrap as long as the connector-cover. Start on the “plug end” by sorting the wires side by side und push them into the gab carefully. The wrap of the cable can be pushed into the…

Lego Compatible (40395.dat) Animal Dinosaur Tail/Neck Curved with Pin

This model is compatible with the lego system.

Lego Compatible (40395a.dat) Minifig Key

This model is compatible with the lego system.

Lego Compatible (2039.dat) Support 2 x 2 x 7 Lamppost with 6 Base Flutes

This model is compatible with the lego system.

Lego Compatible (105039pb01.dat) Minifig Hair Long Wavy with Bun with Molded Crown, Band and Wings Pattern

This model is compatible with the lego system.

mmWave - ESP8266 D1 Mini - Presence SEN0395 Sensor Case

This is an enclosure to house the mmWave presence sensor that is used by the ESP8266 board. The mmWave sensor build was created following the Everything Smart Home Video channel. I recommend watching the video to understand how to build…

Case for ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395)

A small box created to fit a ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395), in my case for use with ESPHome. It has a snap fit lid with slots to make it easier to get off again. I've added my parameterized Fusion360 file for easier…

#039 Jigglypuff – Low Poly Pokémon

Low poly Jigglypuff, the Balloon Pokémon. Cute, round, and perfect for fans of singing Pokémon.

Intimate Geometry - NSFW Hueforge 0039

Petit Poussoir KSMVSA robot culinaire KitchenAid W11039695

Poussoir de remplacement pour robot KitchenAid.

Skil Router Table inserts (SRT 1039)

Router table inserts for the Skil Router Table (SRT 1039). I wanted more than the 3 inserts that came with the table and give me a larger assortment to support the work piece better for more bits and a small basic tray to hold them in.…

Wall Mount for Lego Endurance Car 42039

Two Parts needed, distance between holes 360mm. Category: Vehicles

Club Hammer 1250 Grams holder 039 I ENFORCE I for screws or peg board

Tool holder for Club Hammer 1250 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 70.60mm H - 64.50mm We…

IKEA Metod Back 10mm Spacer Replacement (10036383 or 10039201)

Check my other IKEA designs: Ikea Metod Screw On Leg Extender (402.055.99) NEW Ikea Metod Leg Extender (705.560.67) Why Lost one spacer (part 10036383 or 10039201) for Metod cabinets, didn't want to drive to IKEA for replacement. Designed…

#0039 [Remix] X2 Delta P Duct (MK3S+) for BEAR Extruder [New 90Deg Flow Splitter]

[UPDATE Nov 2, 2023] .stp file added per request. I've had a lot of good/positive feedback from my X2 remix of the Delta P duct by @teookie . And a few users have requested a BEAR extruder version, so here it is. Versions: Version with…

℗039 Jigglypuff mug 3D print Pokemon

Printable 3D print. Jigglypuff mug. Pokemon inspiration. STL file.

Lego 42039 24 Hour Racer Wall Hook

A wall hook for the Lego 24 Hour Racer to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…

Lego Compatible (103918s02.dat) Windscreen 4 x 4 x 2 with Integral Glass - Frame

This model is compatible with the lego system.

USB Outlet - mmWave - ESP8266 D1 Mini - Presence SEN0395 Sensor Case

This is a case to house the D1Mini and the Presence SEN0395 chip in a small form factor to be used around the house. It blends into any outlet when paired with the charger listed below. The instructions on how to make the board can be…

COVER : AXLE PLAYMOBIL 30039980

COVER : AXLE PLAYMOBIL 30039980

Lego Compatible (103918s01.dat) Windscreen 4 x 4 x 2 with Integral Glass - Glass

This model is compatible with the lego system.

Lego Compatible (30390.dat) Slope Brick 45 4 x 2 Double Inverted with Pins

This model is compatible with the lego system.

Earrings - 039 - Easy Print

Design Concept The earrings showcase a unique gecko-inspired silhouette with an airy, minimalist design. It's fashioned in a stylish way that resembles a swirling design while remaining lightweight and easy to wear. Applications Designed…

IKEA 10039571

Piece with the same measurements as IKEA 10039571 for use on the back of the METOD furniture

BMW K-series side case plastic hinge (P/N 46542300039)

Currently testing if this can work - will update which material and settings work for me. Since these hinges are breaking easily I thought, that printed part might be stronger, as that was my experience with GoPro mounting parts. Not…

Nozzle for Kaercher VP 145 Vario Power Jet 4039784920743

Replacement nozzle. Print upright with brim, 7 walls. The model has a hexagonal drill holder molded on. This allows you to shape the cone onto the cone in the lance at medium speed (gets warm). then the part is cut off and drilled through…

Morton MC30 Water Softener Valve Motor 7286039 Gear Replacement

PLEASE READ ALL OF THIS BEFORE ATTEMPTING A REPAIR When my Morton MC30 reported Error 01, a valve malfunction, I took apart the valve assembly to find a gear with all of it's external teeth sheared and shattered off. Turned out the the…

Kohler Sterling Part Number 1080397 - Shower Door Front Bushing

This replaces Sterling part number Replacement part number 1080397, Front Bushing, which allows the door to slide on the track without metal-on-metal friction. The OEM part comes with a piece of foam for the top of the bushing to prevent…

A Nurse's Calling Charm from DBD

“Still attached to the fragments of her past life, she is drawn to those in need of help.” Category: 3D Printing

:hager G12039010

Endstück zu Brüstungskanal BRN 70x110mm von Hager

Attachment base for CHIYE CY-039 automatic fish feeder

I bought an automated fish feeder for my aquarium. It comes with a removable clamp for mounting on the side of an open aquarium, but for an aquarium with a lid you are supposed to glue down the whole unit with double-sided sticky tape.…

Lego 42039 (24 hours race car) horizontal wall mount

Couldn't find a horizontal wall holder for this Lego car so I made one. needs 2 screws to hold it up. Depending on which way you want it facing hook it in one of the circled areas. This is more a standoff holder for a technic bar. It…

ESP32-POE-ISO SEN0395 In Walll Mount

This is a work in progress. It works but is a tight fit to get it installed in the wall.

Mount for Bosch Automotive 0392022002 Electric Water Pump

This is a mount I made for my car project. It clamps around a bosch electric water pump for a water to air intercooler system for turbocharged or supercharged applications. Bosch pump part# 0392022002 Category: Automotive

SEN0390 case for solar tracker

instal this case on the hollow iron bar or the frame of the solar panel using M8 bolt & nut

Everydays 039 – Arduino UNO Project Enclosure

Today I designed a project box to showcase an Arduino UNO build . The enclosure is made to neatly hold all core components in one place, with dedicated mounting points and clean cable routing. It includes holes and cutouts for 7 LEDs , an…

Toyota Aygo rear wiper cover/replaces Valeo 80003937

260506 Toyota Aygo rear wiper cover/replaces Valeo 80003937 The Aygo has a serious flaw ;-). After 8-10 years the rear wiper breaks. Since it is a Valeo supply the mistake Toyota made is trust French car engineering ;-( Do you know what…

Trennwand SSI Schäfer für RK 400S (RKT 400S 151039)

i needed those seperators so i made them based on the measurements i got from a seperator for a bigger box. tolerances should be okay, the seperator might not click in like the "real thing" does but i think its better that way. have fun…

Shelf bracket 128mm / 5.039 inches

Basic shelf bracket 128mm (Ish) 5.039 inches (Ish) for use with gravel boards to use in my shed as shelves. might be useful to someone. I am printing a variety of infill and plastics to see which is sturdier. trying to avoid a solid…

WEN WA0392 Foot Pedal Guard

This keeps the pedal from moving around so much and adds some additional protection against accidental activation. Remove the stock rubber feet and screws, route the cord through the back, align the pedal with the holes and affix to the…

Peg for affini3's swords

I made a peg Category: Parts

Fortune's Peak

Inspired by prosperity and adventure, "Fortune's Peak" features a collection of classic coins symbolizing wealth, stacked on a mountain-like base that represents the journey to success. With a touch of fantasy and a nod to traditional…

Racer's Podium

Showcase your mini car collection in style with the "Racer's Podium"! Designed with tiered levels and raised platforms, this display stand highlights each car as if it’s crossing the finish line. Perfect for car enthusiasts or anyone…

039 Vorsicht: Spielende Zahlen! Basis-12-Würfelset

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Don't Rock the Croc replacement storage

The cardboard try had seen better days. Made a replacement for it that will be much more durable. Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C **Rafts:** No Supports: No Category: Games

Dell Precision 8M039 Battery replacement

I have various old notebooks lying around which I want to keep. However - LiIon batteries get dangerous to keep after some years of non use (or even used). So if you do the math on how many batteries you might have in your home, you…

Mercedes Trunk Blind Mounting Extension (BOS 9918100398)

This is a high-fidelity reconstruction of the Mercedes-Benz Trunk Blind Mounting Extension. The original part often breaks or goes missing, and finding a replacement can be difficult. This model was created using 3D scanning and…

VASE PRISM 039

Parametric 7.2cm tall object with rounded circular geometry and a prism pattern. Engineered for precise 3D printing.

VASE PRISM 039

Parametric 6.4cm tall object with rounded circular geometry and a prism pattern. Engineered for precise 3D printing.

VASE SYNTH 039

Parametric 6.9cm tall object with rounded circular geometry and a synth pattern. Engineered for precise 3D printing.

VASE CHEVRON 039

Parametric 5.4cm tall object with triangular 3-sided geometry and a chevron pattern. Engineered for precise 3D printing.

VASE MATRIX 039

Parametric 5.6cm tall object with 11-sided faceted geometry and a matrix pattern. Engineered for precise 3D printing.

Luxury Modern Vase 039 - Stepped Column Design

This luxury vase features a clean, architectural column shape with stepped collars at the top and base, giving it a refined minimalist look. It pairs beautifully with dried flowers, pampas grass, eucalyptus or artificial stems, making it…

395394 80395394 Lager Bushing Gummilager New Holland Case Mähdrescher Harvester Combine TC CS

23 mm ID x 40 mm AD x 40 mm L Gummibuchse/Lager/Dämpfer für diverse Anwendung in New Holland und Case Mähdreschern. Druckparameter: 5 Wände / 100% Füllung / TPU 95A Rubber bushings/bearings/dampers for various applications in New Holland…

VASE FRACTAL 039

Parametric 8.3cm tall object with hexagonal 6-sided geometry and a fractal pattern. Engineered for precise 3D printing.

Craftsman 6” Belt Sander Dust Port Adapter (Model #32039596)

Upgrade your shop setup and keep dust to a minimum with this custom-designed dust port adapter, built specifically for the Craftsman 6” Belt Sander (Model #32039596) . Engineered with a dedicated keying notch inside the coupler, this…

Earrings - 039 - Easy Print

Design Concept The earrings showcase a unique gecko-inspired silhouette with an airy, minimalist design. It's fashioned in a stylish way that resembles a swirling design while remaining lightweight and easy to wear. Applications Designed…

Lego Compatible (30390.dat) Slope Brick 45 4 x 2 Double Inverted with Pins

This model is compatible with the lego system.

Shelf bracket 128mm / 5.039 inches

Basic shelf bracket 128mm (Ish) 5.039 inches (Ish) for use with gravel boards to use in my shed as shelves. might be useful to someone. I am printing a variety of infill and plastics to see which is sturdier. trying to avoid a solid…

Mercedes Trunk Blind Mounting Extension (BOS 9918100398)

This is a high-fidelity reconstruction of the Mercedes-Benz Trunk Blind Mounting Extension. The original part often breaks or goes missing, and finding a replacement can be difficult. This model was created using 3D scanning and…

TY010391 Wavy Tray

For more items, visit tomooyamaji.com ! Download includes TY010391_wavy-tray_download.stl Intended type of 3D printer FDM Support Setting Not necessary Brim Setting Strongly recommended Material PLA works great.

TY010391 Wavy Tray

For more items, visit tomooyamaji.com ! Download includes TY010391_wavy-tray_download.stl Intended type of 3D printer FDM Support Setting Not necessary Brim Setting Strongly recommended Material PLA works great.

Display Stand for LEGO Star Wars 75394 Imperial Star Destroyer / 75315 Imperial Light Cruiser / 8039 Republic Venator-Class Attack Cruiser

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…