53 models
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
EN: To identify the control that activates a special light (usually yellow in colour) located in the rear of the vehicle to aid with vehicle identification in foggy conditions. To indicate the operational status of the rear fog light. DE:…
EN: To identify the control that activates a special light (usually yellow in colour) located in the front of the vehicle to aid forward illumination in foggy conditions. To indicate the operational status of the front fog light. DE: Zur…
I've created a rinser that can be applied on every PET bottle with DIN 6063-1 thread (widley used in europe and may be other countries). How to print? The model can be printed in place, without any need for support or rims. A smooth print…
In honour of Pokemon Go's March 15th Community day I have knocked up an Abra one piece and multi-material model! Definitely needs supports! Print instructions Category: Creatures
I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.
This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon…
Summary This is the leg compatible with the Bosch Dishwasher. Model reuploaded from thingiverse. Have a nice maker days. Print Settings Printer brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0,20 mm Infill: %30…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a 6th iteration of my carabiners - this one with an action oriented…
Air assist option for the NEJE N40630 laser with access to focus wheel. fits 5mmOD 2.5mm ID air assist tubing (tubing has air tight fit around inlet so no glue required) this was inspired by a few creators models but did not suit my needs…
This model is compatible with the lego system.
This is a case for a USB Cable Checker model MRB063A available from many sources such as AliExpress. The top part shall be printed with is face on the bed. The 3mf file contains the top part with lettering to be printed with 2 colors. The…
Use your Presto food dehydrator as a filament dryer, without any destructive changes that would interfere with using it for its original designed purpose. Concept inspired by thing #4856292 , but redesigned from scratch. I really liked…
Abra’s mysterious, dreamlike nature is captured perfectly in this low-poly design, where its fox-like body is reduced to clean, faceted angles. Its closed eyes and relaxed posture give it a calm, meditative presence, as if it’s moments…
English Version (print details below) Given that clips are no longer produced and have become horribly expensive for a few grams of plastic, I thought it would be useful to model them. I modeled the two clip types (normal & winged) to…
Originally published here: Motorola Edge xt2063 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will probably fit…
Using a larger fan (20x25mm outlet) and a 3D printed air cone dimensioned to suit the fan's flow and pressure capacity (air guide and outlet not being too narrow nor too wide) you get a good strong airflow. Category: DIY
Feet for HP 672647-063 hewlett packard keyboard with integrated support Print in PLA, some small trim may be required for a good fit.
Made this for my friend's phone as an introduction to 3D printing. We did not find any models for his phone, so I thought let's publish it here. If you found this useful, me know in the comments. :) Prints fine without supports. This…
This fixes a common fault on Dysons DC24 where the ball becoming loose and clunky and gets significant play up and down on the left side of the ball if you look at it from the front. This play can cause the ball to catch on the HEPA…
Tool holder for Open-end Wrench Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 140mm W - 11mm H - 120mm We design all…
This is a wheel I quickly whiped up in fusion to replace a wheel in my bosch heatpump dryer until I could get replacement parts. It just uses a 608 bearing. I had a couple of 608-ZZ spares lying around from other 3d printer projects but…
I printed and tried various air assists for my laser engraver but I found most of them too bulky so I chose the solution proposed by Tine Sedej ( https://www.thingiverse.com/tintek/designs ). To the laser anchored support (…
Neje N4063 laser spacer from the base to be cut or engraved Print Settings Printer: Artillery Hornet Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 20 Infill: 20% Filament: xxx PLA xxx Category: 3D Printer Accessories
Fiat part : 182063280 Compatible with : Fiat Uno, Fiat Fiorino, Fiat Premio, Fiat Elba, Fiat Duna Important : Print horizontally, as per the stl file for better strength.
I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…
Yamaha YHT-399U HTR-5063 RX-V467 RX-V367 RX-V371 AV A/V Receiver Controller Holder
Mount an Anker USB Charger under your desk with a 25 gram two piece bracket. Supports Model A2063 PowerPort+6 QC 3.0 USB. Uses 25 grams and about 1 hour of print time (PETG). Rounded fillet corner design prevents charger from sliding out…
Pequeña pieza en forma de cuña, que hara que las puertas cierren mejor, al hacer que el pestiño entre antes y no haga falta hacer fuerza .
Replacement cap Kärcher 5.063.571.0 Adaptable for e.g. : Kärcher K 620 M Kärcher K 630 M Kärcher K 630 MS Kärcher K 635 M Kärcher K 640 M Kärcher K 645 M Print in PETG, ASA or ABS. Supports are needed.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Sega Monkey Ball - Strike Fighter - Stick Top Mount - 102-0063 Modeled from a broken incomplete original part. A test print looks like the dimensions/PCD fit the original well. I don't have a SMB/SF machine to check against fitment myself…
This is a simple jig for 12mm LEDs spaced 3" apart on a 2" x 2" x 1/16" Aluminum Angle 6063. The drill hole is 13mm and the catch numb is 11mm. This should give you enough room to drill without coring the plastic. The nub is a bit smaller…
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
Design Concept These earrings showcase a fun geometric panda design, crafted for simplicity and charm. Purpose Perfect for fashion accessories or as a cute gift. Suitable for personal wear or to add flair to a design market. Printing Tips…
opravný nasazovací patník na dámské boty č.7063. výška 3 mm + gumová podložka 4 mm https://allegro.cz/nabidka/guma-4-mm-silna-pro-boty-na-fleky-16-x-24-cm-cerna-9528218004 Do tisku přidány i klíny , když je sešlapání větší. Ty jsem…
Droideka (Destroyer Droid) - sw0063 Droid Should be scale up to 400% in order to have good results. Part 4592c02 is supplied as separate 4592 and 4593 STL files. Building instructions This droid is present in the building instructions for…
Printable replacement for the freezer drawer slide rail clip on Bosch / Thermador / Gaggenau built-in refrigerators. Replaces OEM part 00633652 (supersedes 00604665; also sold as AP5953399 / PS10060851). Fits the T24/T30/T36 built-in…
Parametric 8.2cm tall object with 10-sided faceted geometry and a chladni pattern. Engineered for precise 3D printing.
Parametric 5.0cm tall object with rounded circular geometry and a geo pattern. Engineered for precise 3D printing.
Parametric 4.9cm tall object with rounded circular geometry and a knurling pattern. Engineered for precise 3D printing.
Simple battery cover, nothing less, nothing more Hole can be widen with a help of a drill if needed, model ain't perfect :) Print with latches facing the bedplate, usage of supports is strongly encouraged
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
