13 models
Trijicon RMR to Holosun 407k / 507k adapter plate for Brownells Glock 17/19 RMR cut slide or MOS Version 2 Will require the slide posts to be shaved down about 1.5mm or so, you will also need to grind away some material from the 3mm nut…
I modified Johny69's cover to fit the Holosun 507K X2 optic. The modification to the size was done by adjusting the dimensions in Prusaslicer. Cutouts were added to fit the SIg P365XL on the front and rear and I trimmed the inside wall to…
Cover for the front of a Holosun 407K/507K reflex sight. This is the side that collects the most dust when holstered and is the hardest to clean. UPDATE: Added slots on the side to make it easier to grip when removing/installing. Print…
Remix of Johny69's canted mount to incorporate Holosun 407k footprint instead of picatinny rail. The mount is all one piece(minus the slide), I just changed filament from pink to brown at the start of the added plate to highlight remix.…
The Holosun 407K is a direct mount on my Tisas Nightstalker Double Stack, but I found that even with the elevation adjustment to the limit it was still shooting too low. After getting a shim off of Amazon only to find it wouldn't fit on…
I liked the idea of the creator of the original model of using the MAF sensor housing for the intake. So I basically did the same design but with thicker walls and smoother airflow. I also adjusted some of the dimensions to have better…
Remove the lower sheet metal castor bar. there is one nut on the bracket. remove the pin from the castor part with a tool. print this part and put the old castor back into it. reassemble.
Created this model because i couldn't find anyone who had made one. i didn't want to pay $30 for a mounting plate. Feel free to do whatever you want with the model
This is a little slide in mount that I'm using for my FiiO E07K DAC. It was designed in OpenSCAD, so it should be easy to configure it for devices with different dimensions. OpenSCAD Source available at GitHub Desk Mount For My FiiO E07K…
This is a mounting bracket for the TRENDnet TK-207K KVM. It is a 2-Port USB KVM Switch. The device labeling is upside down. I preferred to have the heavy cables downward.
This is a holder for a TRENDnet TK-207K KVM. The holder is hanged on a unit side of the Ikea Ivar shelving system. The TRENDnet TK-207K is a 2 ports Keyboard/Video/Mouse switch. I suggest to use 30% of infill along with support that…
3D printable cold air intake for your MK6 VW 2.5! Unlock induction noises and enough placebo power gains to make your butt dyno say “It feel torqueier down low!” with this here 3d printed doohickey. Disclaimers: - While I have had no…
3D printable cold air intake for your MK6 VW 2.5! Unlock induction noises and enough placebo power gains to make your butt dyno say “It feel torqueier down low!” with this here 3d printed doohickey. Disclaimers: - While I have had no…
