Counting matching models…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
This model is compatible with the lego system.
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
The original part is made out of PA6 GF15 but feel free to test possible alternatives. I would use at least PETG or ASA.
This model is compatible with the lego system.
New covers for your e46 Different versions: Plane M-Logo
Only requirement is to print it out of a material that is UV resistant. No supports needed, regular settings for any functional print. It's just very slightly oversized to make it friction-fit with the layer lines but doesnt really matter…
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
This is a replacement part for the Astro A50 Gen4 (A00085) for the right side mount that connects the headband to the headphone slider arm. This model is slightly different from the original mount. It is slightly thicker at the bottom…
Its loose recreation of original part 8N0853586A. May need some tweaks depending on state of your car body.
We had to replace a stove knob. This is a remix from the one from millerontap, which was very close to what I needed but not exactly right for my WCG55US0HS cooktop. The knob I'm trying to replace has a W10850010 stamped on the bottom.…
I was missing one of these blanks on my 1996 T4 looking at the prices of used blanks online I figured I could get quite close designing an stl instead, I printed this at .2mm in ABS I didn't clean the bed prior to printing, the original…
The images included are of the original part. Learn more about Actualizings on: https://www.actualizings.com/en/
Clip for weather/rubber trim on A-pillar for Seat Leon MK1 (1M) / Toledo
ENG: Hello! I've designed enclosure dedicated for equipment said in title. Box and Lid should be printed using weatherproof material as PETG or ASA. Optional Seals- of course TPU. Apart from printed parts you'll need: -8(4 will be enogh…
Tool holder for Rubber Cap for Club Hammer. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 41,57mm W - 78,8mm H - 63,30mm…
PETG works best. 2-3 Layers, least infill is good.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Components to attach a smaller motor to FoilDrive Assist Max units. WHY: The smaller diameter 5085 motor has less power than the 6384 HP motor that FoilDrive provides. The smaller diameter makes it better suited for wing and parawing…
USB power meter from manufacturer Hidance HDC 085C The case has a magnetic closure (2 magnets with a diameter of 8mm x height of 3mm) When printing in place, set the print stop and press in the magnet. USB-Leisungsmesser des Hersteller…
Press on T's require very soft TPU (the common shore 95 stuff will be to firm to get on/off). Very limited testing. Screw on T's do fine in any TPU. Print Settings Rafts: Doesn't Matter Filament Material: TPU Category: Sport & Outdoors
This is a replacement chute handle part for a John Deere 44-inch snowblower (for X300, X304, X310, X320, X324, X340, X360, X500, X520 tractors). The John Deere part number is M90085. I suggest printing this in PETG with a brim.
Now that saddle packs are history. Time to go back to the original strap for standard size packs. But wait, what do you mean you lost the original parts? They are not manufactured anymore? Can't find them anywhere? Worry not. Here they…
EN: To Identify the control that activates all side markers and tail lights in a predetermined flashing pattern. To indicate the operational status of the hazard warning. DE: Identifizierung der Steuerung, die alle Blinker in einem…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
I use a pelican case for my framework laptop. I wanted to include the screwdriver. May work with other pelican cases but idk. I pulled out 11 cubes of foam to fit. I printed it in TPU to make it flexy but you might be able to use other…
Replacement divider tab for a multi-device USB charging station (based on model KCE0085). I made this to replace the original tabs after a few went missing. The tab is roughly 91.5 mm long × 44.2 mm wide , with a small notch to lock into…
Snap-fit mount for the Adafruit BNO085 9-DoF IMU breakout (product 4754). Buy the board: https://www.adafruit.com/product/4754 A PETG base plate and a snap-on cover. The board screws into brass heat-set inserts, and the cover snaps on…
A design for a vibration isolating pad for the Adafruit BNO085 IMU breakout intended to be made from 30A silicone. I've provided a model of the pad itself in case you want to manufacture it using some other method or modify it, but I've…
Merloni ( indesit ) refrigerator fridge freezer drain flap valve 14mm part number C00857077 I made it from TPU A95.
I have an Gorenje WA60085 washing machine, and spring that holds main drum broke which service guy replaced, but there was no original spring holder (it flew into the void :-) ). Washing machine worked but spring was squeaking during…
Parametric 8.1cm tall object with 10-sided faceted geometry and a ripple pattern. Engineered for precise 3D printing.
Parametric 5.7cm tall object with square 4-sided geometry and a aura pattern. Engineered for precise 3D printing.
(R)-(-)-1-CBZ-3-pyrrolidinol (C12H15NO3, CAS 100858-33-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every sphere shows which element it is through an engraved symbol, not a colour code. Ask students…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
I have an Gorenje WA60085 washing machine, and spring that holds main drum broke which service guy replaced, but there was no original spring holder (it flew into the void :-) ). Washing machine worked but spring was squeaking during…
Replacement divider tab for a multi-device USB charging station (based on model KCE0085). I made this to replace the original tabs after a few went missing. The tab is roughly 91.5 mm long × 44.2 mm wide , with a small notch to lock into…
Loose recreation of existing VAG part 1H0853586. May require 2%-3% scale up in slicer depending on your printer and filament. Flexible materials strongly recommended.
I just started learning Blender and this is my first ever model design.
I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…
Full Image Catalog The complete gallery of my works can be found at Portfolio . You can search by the file’s reference number or simply click the preview image to open it directly. 📢 Preview & content note This entry is flagged NSFW, but…
This is a functional replacement knob designed for the IMUSA Air Fryer model EZ130856. If your original control knob has broken, cracked, or gone missing, this 3D printable replacement will restore full functionality to your air fryer.…
This is a small carrying case for the “HDC-085C” USB-C tester. (this tester is sold under various brands) Features: Classic filament hinge. You'll just need about 40mm filament, no screws. It stays closed with four round 8x3mm magnets.…
FDM-friendly 2.5" SSD caddy based on Dell 85PPW design. Tested on XR2, expected to work with MX740c, MX840c, MX750c, XR11, XR12. Screw-mounted SSD (M3) Open design for airflow Works with SATA and SAS backplanes Designed for ABS printing…
First attempt at recreating the mounting clips for an MD5 Display. This has not been tested yet.
This model is compatible with the lego system.
The Lidl lamps a not that great when mounting them on a wall with a powercord from above or below (The wobble a bit). Therefore I designed this mount for the wall. I would suggest printing it in PETG since PLA is not that weather…
This model is compatible with the lego system.
