Counting matching models…
Easy print. The chainlink has built in support ,other parts need support. I will provide the rest of the parts with built in support… Print with ABS 0.2 or 0.12 Layer height and should be fine… Nozzle 250 Bed 100 in my case… You can open…
Another drag chain end for a 10x11 chain. It contains a lock to avoid the flexing of the end. Variants with 2 and 3 holes. In the Fusion 360 files you can select 2 or 3 holes by suppressing or un-supressing the hole feature you need. The…
A Lithophane in the size of 110 x 110 mm depicting the Carina Nebula that was captured with the James Webb Telescope . The Image of the Carina Nebula is framed in a hexagon grid resembling the James Webb Telescope. It consists of two…
This is a remix of the existing drag chain end. Basically just the opposite end with nudges instead of holes. Kudos to @Dajosco for the existing model.
These are a set of drag chains and accessories designed for the Ender 3 10x11 drag chain : similar to commercially available nylon ones Bed stain relief : clamps on bed frame; heated bed wire relief; clips onto drag chain
Perforated Mounting Board 220x240 mm | 5 mm Thick | 5x15 mm Slots | 20x20 mm Grid ✅ Product Description: A sturdy perforated board made of high-quality material (e.g. PLA, PETG – depending on the version). Perfect for organizing your…
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
Here is my version of a chain link 10x11 R18 for the (Miniaturised V-Minion) it is more robust and it can be printed both in PLA & pegt without support or brim.
EN - Spacer preventing bending in the wrong direction. Can be used with ziptie. M3x8mm screews DIN7991 +2mm longer then normal 6mm screws CZ - Rozpěrka zabraňuje ohnutí ve špatném směru. Lze použít stahovací pásek. M3x8mm šroubky DIN7991…
This is a remix of the existing drag chain end. Basically just the flexible. Kudos to @Dajosco and @Jevermeister for the existing model.
Mod for 10x11 dragchain with openings ( https://www.aliexpress.com/item/32214281467.html ). Original mount didn't fit on my Vcore3.1 anyway (insufficient clearance when Z=0), I had to mod it a little bit more than just adjusting holes for…
Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
Easy simple print will require 2 M4 heat inserts for the top to mount to frame and 3 inserts for the Drag chain Untested as i dont currently have a 10x11 chain but its on order and will here soon
this first layer print is to test your printer
loved the design of hymness1 but it wasnt on the printables so a lot of people missed it. i did nothing to files all original work of hymness1. just cut the builtin supports.
Air ventilation grid 150x150 (inner part 110x110)
I needed to replace some clips on my cheap 10x11 drag chain. Figured someone else might need it as well.
This is remix of : Bambu P1P 10x11 Drag Chain Frame Adapter - Untested by ktothestank | Download free STL model | Printables.com The original by : ktothestank (Thanks for your work) I increased the cutout for the drag chain so it actually…
Remixed from original with mounting that supports 10x11 cable chain. Works for Ender 5 Plus
I made this pieces to help me organize all the wires inside the chains. They are meant to be used at the end of the chain. I put some electrical tale around it to prevent the wires from coming out and to prevent it from sliding inside the…
Original model was close to fit my cable chain but needed a few tweaks.
This is a simple 10x11 drag chain mount that connects to a stock Sovol SV05 toolhead. This is uses the existing holes for the stepper motor mount and sits over top. You'll need (2) M4x10-12 to replace the stock ones supplied. You can also…
Da meine Abluftöffnung im Bad ständig verstaubt (was normal ist), wurde das Säubern immer nerviger. Der Stoffeinsatz verformte sich immer mehr und ein Reinigen war kaum mehr möglich. Also habe ich FreeCAD angeschmissen, ein Video zum…
EN: This modular rack can be printed on any small 3D printer. If you keep the printing position and perimeter numbers as defined in the included 3mf files, you will not need supports when printing. CZ: Tento modulární rack lze vytisknout…
The 10x11 Cable chain delivered via german Amazon had a smaller space betweeen the holes and so i designed it new. this chain: Zeberoxyz 10x11mm Schleppkettenlänge 1Meter offener schwarzer Kunststoff-Kabelträger R18 mit 1Kit Endverbindern…
Overview: Run a 10x11 drag chain from the X-axis motor cover to the linear-rail-mounted toolhead of your Ender 3. The chain-link is offset from the centerline of the 2020 extrusion towards the front of the printer by just 1.25mm. This…
For all of your Ender 3 Linear Rail Stealthyswiss cable management needs NOTE: The photo I took of my cable routing uses an earlier revision of the part. The current iteration is a little wider along the X axis among other changes. An…
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
Original model was close to fit my cable chain but needed a few tweaks.
Shelf support 110x110mm and 160x160 mm.I made in double size both of them,printed in PLA or PETG,no support,infill 20%
Ke zvýšení životnosti HEPA filtru pro vysavač ETA Andare Animal používám vložku z filtračního materiálu H-filter R95 (viz. níže) K vyříznutí správné velikosti slouží tato šablona. Ke stažení je také příslušný projektový soubor pro…
My wife asked me for a little trash can for her desk to collect scraps from cross-stitching and model-making. Overall dimensions: Height: 11.4cm(4.5in) without lid, 15.4cm(6in) with lid. Diameter: 10cm(4in) at top, 7.6cm(3in) at base.…
![Ender 3 X-Axis Motor Cover 10x11 Drag Chain Adapter [Male & Female]](https://media.printables.com/media/prints/167953ad-8b6e-4b5a-ae99-422cad748bd1/images/13505237_a1cb5488-3ad5-45a6-aa49-43a2ab4f8f04_1a68ac1d-fb81-4f17-b9df-843a42e5f825/ender-3-x-axis-motor-cover-10x11-drag-chain-adapter-female.png)
