24 models
I designed another wall mount because other ones I saw had too much vertical play when removing the battery. This model has pegs that lock into some recessed screw holes to prevent vertical sliding. 15% infill with PLA was flexible enough…
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
Did the foot on your Rigol 1054Z oscilloscope break? Print a new one and fit it in minutes. This print is a bit "sloppier" than the original but it's close enough to lock in place. Print instructions Print this at 0.05mm layer height…
Multiboard mount for the DCB1104 DeWalt charger.
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle. It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.…
Printed in Bambu PLA Matte on an X1C on the “strength” preset (but probably not required). Plenty strong. Mount it to the wall with drywall screws. Put a couple of #6 x 1/4" screws into the holes in the bracket. Slide the charger over the…
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
this mount adapt 1104 motor for 3 holes prop Category: R/C Vehicles
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
I tested it in real life and it works very well, I recommend you use layers that aren't too big and you should use 100% infill. I tried it with PLA but other materials will probably work too.
Simple print, these two brackets give the scope a slight downwards angle so that it can be mounted higher up (I have mine over my monitor). The scope clicks into these brackets and is very firmly held in place. Let me know if you like…
This was designed on FreeCAD. The mount is simple. The octagon tangential diameter is 14 mm, and the spacing is 100 mm (4 spaces on Multiboard). I print it on it's side with tiny supports for the two pins that hold the charger in place to…
Got tired of accidently pressing the AUTO button and decided to do something about it.
My oscilloscope is on a slippery surface and I have to hold it every time I press a button. So I designed a very simple mount that can be stuck to the workbench with double-sided tape. Insert the feet of the oscilloscope into the mount…
A stand for the Siglent SDS 1104X-E so you can mount it on top of the siglent SPD3303X-E power supply. does also fit for other models like the Siglent SDS1202X-E. designed in Fusion 360
If you like this model and use it please upload a like, it really helps others find it! I hated having my scope on my desk and the cables getting in my way, especially when not in use, and I already had a “portable” touch screen mounted…
USE M2 SCREWS FOR PROP ADAPTOR
I found this cool cover for a SDS2104X , but it doesn't fit my model (and no CAD model provided). So here's a from-scratch design. I prefer PETG. Add supports under the four pegs so that they are clean enough for mating the two halves…
A friend had a part broken off the gate. This is a Replacement Part for Bily BG811047 Expandable Metal Gate. Probably want to print at 75%-100% infill.
The original heater motor has the 19mm cooling pipe, the Luzar motor LFH1104 has 14mm. This spacer is placed on LFH1104.
Gridfinity Bin for 1x Anker PowerCore+ Mini (A1104) with 6x3mm magnet holes Powerbank diameter: 23mm
This mount is compatible with 1104-sized motors. The maximum propeller size is 2 inches. You will need four M2 screws.
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
This mount is compatible with 1104-sized motors. The maximum propeller size is 2 inches. You will need four M2 screws.
