Emax Micro Power System 1104 - FPV Quadcopter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 63
- Makes
- 0
- Views
- 647
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle.
It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.
https://www.emaxmodel.com/emax-rs1104-5250kv-brushless-motors-with-prop-t2345-combo.html
An FRSky XM reciever fits into the gap in the upper part, with the Antenna tube (Standard 3mm) mounting in the same part. Battery is the Turnigy 300mAh 2S.
Flies absolutely fantastic on stock pids for me (Betaflight 3.1.7)
All up weight as per my photos on Prusa PLA is 88g
Print instructions
Category: R/C Vehicles Summary
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle.
It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.
https://www.emaxmodel.com/emax-rs1104-5250kv-brushless-motors-with-prop-t2345-combo.html
An FRSky XM reciever fits into the gap in the upper part, with the Antenna tube (Standard 3mm) mounting in the same part. Battery is the Turnigy 300mAh 2S.
Flies absolutely fantastic on stock pids for me (Betaflight 3.1.7)
All up weight as per my photos on Prusa PLA is 88g
Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.15
Infill: 25%
Notes:
The Camera Bracket part needs to have supports turned on....
You max have to adjust the infill for the correct stiffness.
Post-Printing
Remove Supports!
The fit from the upper to lower part is just clipped. May be necessary to add some adhesive to help here.
How I Designed This
Siemens NX 10