Counting matching models…
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor. Wanted to be able to use it on my radio as the goggles done work with my eyes. Screen attaches with a standard ¼" tread 5/8" machine screw. See the attached…
Update 11.012.25: added the Fusion360 files for easier modification. I remixed the "Cog Laptop Stand - Adjustable angle" from @cq_15273 to fit my portable projector (Wemax Dice). I wanted to be able to point the projector at an angel to…
SCX24 - Snow Plow Mount with 3mm LED Mounts Here is snow plow mount that will fit an EMax ES08MAII or similar servo. There are two versions of the snow plow mount in this pack. One version with 3mm LED mounts on the bumper. The second…
Це приблизна модель модуля передавача Emax Aeris 915 МГц. Це допоможе зрозуміти приблизні розміри і на їх основі змоделювати аксесуари для спільної роботи з цим модулем.
updated version changes: -servos changed to GDW DS 041MG -arms beefed up -motor plate has tab for zipting motor wires to. -m2 hardware for fastening nacelles halves together. Needed: m2 screw kit from amazon 2x 4x10x4 flanged bearing 2x…
Da das original Teil einmal durch zu starkes/schnelles ziehen an der Schnur kaputt gegangen ist, habe es dicker gemacht, was noch immer perfekt reinpasst. Gedruckt mit PLA. Since the original part once broke due to pulling the cord too…
official site info: https://www.emaxmodel.com/es08a-ii.html Size may be different from the official site, but this is the actual purchase of more than a dozen measurements and includes all the relevant size. Category: Hobby
Every tiny town needs a fence! 🏡 This miniature fence model is scaled for Lemax villages —perfect for spooky Halloween setups in Spooky Town 👻 and cozy Christmas displays 🎄. Whether you’re fencing off a haunted graveyard, outlining…
21/03/20 - Added Camera mount v2 My Drone flies perfectly like the one that I bought originally. Now it has XM+, 400mW and great vision. That modifications adds weight so now it is about 70g instead of 50g, but on 2S it still flies great.…
LEGO mount for small servos Fitec Continous Servo FS90R and Emax ES08MAII Analog Servo. Prototype even faster with a help of LEGO technic pieces to mount your small servos. Can't wait for the servos to arrive? No problem, print their…
A mount for the Runcam Thumb on the EMAX Tinyhawk II The bottem can you use in TPU or PLA, the top only in TPU
Simple and very light wing mount servo box for a EMax ES 9051 4 gram servo. The servo is not glued in, it is a press fit and doesn't move. Glue the box in the wing, install the servo, screw on the lid and done. Takes #2 3/16" screws.…
I planned to build a Winter Wonderland Village on a commode with a depth of 40cm. Because I needed a track with radius of 20cm (instead of 30cm), I designed a completely new curved track compatible to the original LEMAX tracks. I think,…
Simple wall mount for the EMax Tinyhawk 3 and Tinyhawk Freestyle 2. Easy and quick print. Hangs the drones on the wall with a single screw. We printed in PETG because my son liked the color :)
I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle. It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.…
Modified version of 'Tinyhawk Freestyle II - All Parts' by ClintCollins . The top and bottom battery holder have been split off from the rest of the parts and given taller walls. There is also a top battery holder that has a larger hole…
EMAX Eco II motor mount plate. The holes for the motor are 16mm apart. Use the M3's that come with the motor for “3mm arms”. I recommend to print this in anything but PLA, if your motor gets hot is might cause problems.
This model was designed to fit well with two 1S 720mAh batteries from GN3. I have used it with smaller batteries and have found that it prevents front ejection just as well. The print pictured was done in Prusa EasyABS with a 0.6mm…
As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used…
These are feet with motors guards for the Emax Babyhawk HD. They require longer screws to mount 7mm is exactly right, but 8mm with a 1mm spacer is what I do. These have save my arms from quite a few crashes. taking the abuse so the carbon…
Simple mount for EMAX motor.
A blank for design fitting. Original prop curvature was sourced from: https://grabcad.com/library/emax-avan-flow-props-1
Made some simple horns to mount on top of the Babyhawk! These come in at 1.96 grams the way that I printed them, but could even be a little less if you tweak it some more. Uses the same screws already installed in the camera housing, but…
This is a remix of Jubalthegr8's Caddx Vista antenna mount for the BabyHawk II HD. I added an R9 antenna holder on the back. Print in the orientation you see in the image above with supports turned on. The R9 antenna comes down at an…
If you don't have a MMU just print the top without the letters. If you have a MMU's just add the letters as a part and you should be able to print the letters in any color you want. The lid snaps closed but is not the best, so might have…
(EMAX HAWK 5 TO SCALE PARTS) (4) 5" Arms 4.5mm (1) Top Plate (2) Support Rails (1) Mid Plate (with 20x20 and 30x30 mount support) (1) Bottom Plate (with 20x20 and 30x30 mount support) (4) 25mm Standoffs NOT INCLUDED (4) 1.5mm Risers NOT…
Craft your own realistic miniature trees with these 3D printed tree bases—designed specifically to hold individual floral pick stems upright and stable. Whether you're building a bustling Christmas village, a spooky Halloween town, or an…
A mount for the Runcam Thumb on the EMAX Tinyhawk II
Wanted the Blade cavity on the nut side and thinner cutter exit points. Can now print Half 2 upright for multi-color
Please like the upload if you enjoy it! Your support helps me upload more awesome designs! This is a lightweight (1 gram) but wider battery holder for the Emax Tinyhawk II Freestyle. It’s perfect for larger batteries like the GNB 650mAh…
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
(UPDATED 096-06-2020) Created a smaller version that still fits perfectly. Tried the others but would not work with My Emax Hawk 5, with a capacitor. So I went to Fusion 360 and modeled this up. Fits like a glove. Everything is keyed, and…
Mounts an NSK Emax Evolution precision rotary tool handpiece into a ¾" lathe tool holder. This is a very minimal model, recommend customizing as you see fit. Notably: Tool changing is still possible with the IR-310 attachment but could do…
Tried a similar print from another site but the hole was too large and the lamp still had a tendency to tilt. I struggle without a good Step file to make changes so made my own. I have attached 3 different inner circle sizes. Just incase…
Some Sliding feet for the EMAX RS2205 2300KV motors. In the F3D file, you will find 3 parameters. Parameters rib_size This defines the size of each of the 4 ribs (as rib_size * 2 ) foot_diameter This defines the total diameter of the…
I have built a Winter Wonderland village with LEMAX products. I needed a tunnel, so I designed this. I also share this with you. Print Settings Supports: Yes Category: Buildings & Structures
This is a model designed to keep the sticks/gimbals from getting knocked around if you toss your transmitter in a bag.
Simple low profile clip to keep the top of a freemax mesh vape from opening. in your pocket or from a fall. Just slip it on over the top with the split over the logo and snap the clip's bumps into the indentation's on the vape. To remove,…
Camera Mount for EMAX Wyvern Link Open IPC VTX Alpha Units 100mW
This is a mounting system for a securely fixing an XT60 adapter in place to an Emax Nighthawk 250 frame at the back. The mount holds the XT60 in a vertical position which fixes the battery cable in position out of the way of the…
A 2-part set to hang up your EMAX transmitter. Clips into where FPV screen clip would go.
Wall hanger for EMAX Babyhawk II 3mm holes for countersink screws
Great little vape but not ideal in pocket as falls over so useful holder for lanyard and has ports for charging whilst fitted to holder
The frame is sharp AF. Don't accidentally cut into your leads like I did! Print in TPU with supports. Might need to scale to get it to fit well --- it's not perfect but close enough for me. Print Settings Printer Brand: Creality Printer:…
Adapter for O4 lite Emax Babyhawk 2/ o3 lite 25°
cover piece for the trimmer TR20 it fits like a glove. Highly recommended PETG or more durable material like ABS. print with support, brim is recommended. Uploaded the v2 model, with better strength.
Needed a dummy for the design of the SCX24 front body mount with servo winch.
A support to better locate the battery, printed in TPU Print instructions Category: R/C Vehicles Summary A support to better locate the battery, printed in TPU Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…
Some little feet and a LED strip mount for the Babyhawk. Print in TPU with supports, and then super-glue them on. I ran the wiring for the strip down the arm with back right motor since it's closest to the LED pads. EMAX messed up the…
Servo mounting bracket for an EMax ES08MAII servo. First glue the bracket into a hole in a panel, then zip tie the servo in place. Allows the servo to be removed and replaced easily. Panel thickness matches nominal 3/16" thick foam board…
Models: emax_motor_wrench_v1.0r.stl -----> standard wrench for rs2205/rs2306 emax_motor_wrench_motor_guard_v1.0r.stl ----> same as #1 but for people who have motor guards and cannot fit the standard wrench…
Second iteration of my Emax Hawk 5 Lowering kit. Makes the body lower using only 13mm stand offs. New camera mount, shorter stand-offs (13mm), sanded base plate to acomodate the new camera position. Using a custom cut carbon fiber camera…
Top plate mount for GoPro Session 4/5 cage with back mounting. 4 versions: a - first version, directly replacing two top side plates (not recommended) b - second iteration of the a version (also not recommended) c - third version intended…
I have made a v2 since and have been flying that. EMAX Hawk 5 lowering kit v2 --- Lowering kit for Emax Hawk 5. Makes the body lower by 5mm. New camera mount, shorter stand-offs (20mm). The camera mount is meant to be made from carbon…
TPU diffuser for EMAX Pulsar 2306 motors with LEDS. Kit comes with red, white and blue. Print this from any TPU for different light colors. Photo shows effect with Sainsmart purple TPU. Easy and quick to print, nice fit. TinysLEDs Print…
This mountain with the cross on top of it is designed to be placed behind the "Winterhaus Resort", the Battery pack can be placed down below. The moon stander can be set between the two mountain parts, they can be glued together.…
Have been using both part and is inconvenient to take both off to fill the tank so i put them together
Simple EMAX B6AC under desk holder
Antenna holder for emax Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915 Unterstützte meine Arbeit / Support…
Remix of "EMAX 250 Nighthawk Pro Side Cover" from norf Honecomb tested. A little wak, but looks awesome! =) other not tested. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil…
hey guys, installed a Hobbywing Ezrun Max8 into my Widemaxx. Enjoy
EMAX Nighthawk 250 XT60 mount Category: R/C Vehicles
Emax Babyhawk II antenna mount Category: R/C Vehicles
This is designed to prevent the freemax mesh pro tank from accidentally opening inside your pocket. not much else, feel free to edit as pleased, comment if the license is wrong or you need other files, its relatively simple to recreate…
Camera mount plate and standoff to clear 7" props. Spacer to offset Hoverthings landing skid for off set from mounting the front arms above spacer vs. rear arms below spacer. Non commercial please Category: R/C Vehicles
Simple and very lightweight case for the Skyline32 Flightcrontroller from EMAX. You can use M3 Screws Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach:…
Remix of "EMAX 250 Nighthawk Pro Side Cover" from norf Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915…
I love this drone (especially without the propeller guards) :) Please enjoy the STL, SVG and STEP files for the EMAX Nanohawk drone's frame . I also made a version that supports standard tinywhoop motors (like 0802s).
Very simple EMAX Nighthawk 250 landing gear with more distance to the ground for landing in grass. Category: R/C Vehicles
EMAX Nighthawk 250 arm guard. Best result with Soft PLA. ~15gr each with 50% filling, ~10gr with 10%. Category: R/C Vehicles
EMAX Nighthawk 250 RunCam Sky+ mount Category: R/C Vehicles
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
You have a EMax Baby Hawk and just bought the Flite Test Gremlin Chad Lewis carbon fiber frame (best there is!) to re-Frame your Baby Hawk guts but ..... the EMax Camera does not fit the included camera mount because it was designed for…
Gridfinity Element This element is part of the video “1Day1Project”-Gridfinity Table on our YouTube Channel. Feel free to download and use this element. Material: PLA All Gridfinity elements are open source and you are free to copy and…
SXmini puremax version 1 and 2 Wanted to charge upright and have a stand for it. enough size to keep stable. Please note: depending on the accuracy of your machine the right angle usb c adapter should be a firm fit. Amazon link to thr…
EMAX Nighthawk 250 MinimOSD mount Category: R/C Vehicles
Wanted to charge upright and have a stand for it. enough size to keep stable. Please note: depending on the accuracy of your machine the right angle usb c adapter should be a firm fit. Amazon link to thr right angle usb c adapter.…
Remake from https://www.thingiverse.com/thing:808768 (3mm) but intended for flexible PLA. If this is printed with normal PLA, the legs of the drone need to be removed so the gear can be inserted from the side. Difference: Bridged legs…
This model was created as a CAD reference / space-claim model for projects where an evaporator needs to be incorporated into a custom enclosure or mechanical assembly. The geometry is intended to make it easier to: Design mounting…
The StoreMax Handle Round (sold at DIY stores) mounts with two threaded bushings that sink into 7 mm holes in the door. The fit is tight: the bushings have to land exactly in those holes, so a 1 mm error in spacing or position is…
Tried a similar print from another site but the hole was too large and the lamp still had a tendency to tilt. I struggle without a good Step file to make changes so made my own. I have attached 3 different inner circle sizes. Just incase…
Adapter for O4 lite Emax Babyhawk 2/ o3 lite 25°
Print In TPU, tolerances are designed for it and it would break too easy in any other filament. I used on a drashark frame with old THF2 motors, and with some loctite red and tpu, ive had no issues, I had to get longer motor screws as…
I built this fence for my Winter Wonderland village. Category: Buildings & Structures
This is a remix of bubbajunks Emax Hawk5 Strap Saver. It prevents the carbon fiber on the hawk5 from cutting the battery strap. Slightly improves fit and uses a little less material. Fusion 360 files available here:…
Remix of existing kayoumini canopy to accommodate cameras of a similar size with a 10mm lens like that which comes with the Emax Wyvern 100mw OpenIPC air unit.
This is a 3D-printable shell from the GenCo Microwerks, made for 40Max-compatible blasters. It has the same form factor and is for people who either can't or won't deal with the whole HPA thing 40Max shells have going on. Technically…
Name: Cale Craig Part Name: yowseWeaponMount Section: Combat Purpose: Attach weapon motor to the robot Proposed Material: Nylon Needed by: 2/28/25 Comments: Sorry for late notice
Box for 4 pcs EMAX AVAN 2 inch propeller. Print with PETG 0.2mm, without supports.
Cup holder fits into the metal bracket from a Shademax Car Cup Holder found on Amazon. Probably fits other random Chinese car cup holder brackets as well. The T shape on the side of the cup that fits in the metal bracket is 16.75mm wide…
A Gridfinity storage for the EMAX Eco 1404 Brushless motors. I haven't tested with different 1404, but they should fit.
There are a few options already but non combined. I dropped mine and broke the tip but I've always glued the separate parts together as held in place better I found. Today I decided to design a combination of both. I also like a wider…
The Lifemax 1233 talking clock is supposed to be suitable for visually-impaired people. Unfortunately, the design makes it anything but. The central button that you press to get it to tell the time is surrounded by five larger buttons to…
Hi guys, I have designed this GoPro hero 5 mount specifically for the Emax Hawk 5. I printed mine in TPU, but you could also do it in PLA, but it will eventually break off in a crash Hope you enjoy
Simple wall hanger for EMAX Hawk 5 FPV drone. Made to have the same curve as the bottom plate. Mounts the drone nice and flush against the wall. Hangs it by the shrink tube. No provision for screws, intended to be glued. Printed in PETG,…
Front bumper for Emax Hawk 5. Intended to be cut out of 3mm carbon fiber. I printed a prototype in PETG and it works great. Intended to stiffen the front arms, provide some extra protection for the front of the quad, etc... Protrudes 1mm…
Simple holder for Realacc pagoda antenna. Mounted using two zip ties. The antenna fits snuggly with the silicon boot.
1mm thick mini guard for Emax Hawk 5 arms. Requires 2pcs of 1mm longer than standard M3 screws. Mirror the uploaded STL for the other side.
A reference STL for the EMAX ES 3054 17g servo. All dimensions are approximate per my measurements using my own servo and the spec drawings. If you'd like the Fusion 360 source feel free to msg me with your email.
