1 / 3
Emax Babyhawk 2/o3 - Decorative Horns
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small horns to mount on top above the camera housing
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made some simple horns to mount on top of the Babyhawk! These come in at 1.96 grams the way that I printed them, but could even be a little less if you tweak it some more.
Uses the same screws already installed in the camera housing, but any m2 bolts should fit - stick to m2x10.
Print Settings -
- 0.2 layer height
- 2 walls (using 1 wall brings the weight down by ~0.2 grams)
- 30% cubic infill (sounds like a lot but the space is tiny. Cutting this down to 15% only reduces weight by ~0.1 grams)
- Material: I used high speed TPU and printed in general at 70mm/s.
- Printer: Bambu Lab P1S. If you want my exact settings for this print or my TPU profile, just let me know.
Happy flying!
