Counting matching models…
UPDATE: -Added 3 new sizes: 96mm, 128mm, 160mm hole spacing -The 130mm is not a standard size I guess it should be 128mm, so measure twice, print once. This is an IKEA-style kitchen door handle made for 130mm hole spacing. Please measure…
A monitor stand riser to raise a desk-sitting monitor 128mm vertically. I created this to align my monitor to a television screen mounted on the wall above my desk. It could be used as a platform or shelf for whatever you want raised up.…
Due to the required overhang it is recommended to use PLA or a fiber infused material you prefer. I have used Proto-pasta matte fiber and Kimya ABS Kevlar. I don recommend using carbon infused material due to the amount of touching of the…
Prints very simply. Design includes spacing for a thin adhesive felt/flocking tape, like this one (non-affiliate link). 3MF file includes designs for 714mm & 528mm focal length Bahtinov patterns, make sure you're printing the desired…
Refer to original for details
Simple handle, 128mm spacing, M4 heat insert
Print the supports in a carbon filament, I used Extruder GreenTEC Pro Carbon @0.16 layer height, full honeycomb infill 15 percent and 5 walls, bottoms and top layers. Infuse the final print with very fluid CA as to make it even stronger…
I wanted to add a handle to the edge of my pull out filament shelf and needed to mount the screws from the front. I couldn't find one so I modeled it. 128mm hole spacing and designed to the thickness of a ¾ piece of plywood but obviously…
Marking guide to suit 128mm cabinet handles in 40mm from the door edges, simply line the guide up against the side and bottom edge and mark your hole locations.
This is such a simple model, I almost feel bad uploading it, but if it saves someone else measuring and modeling, awesome! I purchased some shelves from High & Mighty on Amazon and realized that they had an approximate 2mm gap on the…
This former/mold/model is used to create a perfect tapered conical thrust tube for the 128mm HST Schuebeler EDF unit when using my other stl model for fitting the EDF called ‘TopRC EDF Conversion Adaptors for Schuebeler 128mm HST fan’…
A clip on edge for a spice rack that the spices fall out of. Clips on to a 4 mm wire side of the shelf to hold in place. Not sure if anyone else would ever need this but I did. dimensions as is are 128 mm x 60 mm and as mentioned the…
These drawer pulls will brighten up any space. Perfect for a kid's room or any kid at heart's room. 128 mm centers with 4mm inserts. These were designed with the ColorMix feature in PrusaSlicer in mind. In my case I used 5 different color…
Model size: 158x140mm Screw to screw distance: 128mm Screw to top/bottom: 32mm / 108mm Print with Wall Thickness 3mm and * NO SUPPORT* for best results. On my printer it also helps to increase Line Width by 5% if printing structural…
Basic shelf bracket 128mm (Ish) 5.039 inches (Ish) for use with gravel boards to use in my shed as shelves. might be useful to someone. I am printing a variety of infill and plastics to see which is sturdier. trying to avoid a solid…
🧩 Minimal Drawer Handle 128mm (16x16, H40, Rounded) Minimalist furniture handle designed for 128 mm (center-to-center) mounting. Optimized version for support-free 3D printing. 📏 Specifications Hole spacing: 128 mm (C-C) Total length: 144…
Drill guide for door handles with center to center distance of 128mm. Offset 30mm from door edge. Printed in PLA.
I designed this adapter mount to make it simple to install the ReoLink outdoor POE security camera in the location of my older security cameras. The older cameras had a 108mm base, but the new ReoLink RLC-843A have a 128mm base mount.…
Strong handles primarly for 2020 extrusions, using m5x20 screws. As it uses the 32mm steps for the screw distances, it can also work as standard handles. 2 sizes uploaded. 96 and 128mm screw distance (overall sizes 116mm and 148mm). For…
This is a frame for 128mm square led PCBs. I made it for the PCB from 32x32 "LED Pixel Board" bought at the local Action(.nl) store.
Basic shelf bracket 128mm (Ish) 5.039 inches (Ish) for use with gravel boards to use in my shed as shelves. might be useful to someone. I am printing a variety of infill and plastics to see which is sturdier. trying to avoid a solid…
🧩 Minimal Drawer Handle 128mm (16x16, H40, Rounded) Minimalist furniture handle designed for 128 mm (center-to-center) mounting. Optimized version for support-free 3D printing. 📏 Specifications Hole spacing: 128 mm (C-C) Total length: 144…
I used: 0.4N, 0.2LH, Max Perimeters, 100%infill, Fuzzy Skin
Remix uchwytu 128mm na wzór pasujący do innych uchwytów w moim pokoju.
![[128mm wide] Hot Wheels/Matchbox Diecast Car Display - Modular](https://media.printables.com/media/prints/0e96f77c-d5d6-4caa-92f4-039302f5fa53/images/12952540_7af38c23-6af9-442f-8a28-f74bf0014067_3b6bc13b-b0f0-4b25-8831-6f2d97ff5877/pxl_20260513_212138710night.jpg)
