Counting matching models…
I wanted to add an OLED to my custom ergonomic keyboard, but there wasn't a great place on the case. This is a simple solution. Two versions. The original is thicker with a wider bezel. It's easier to print and work with, but a little…
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
I had a finished piece of plywood that i made to large of a hole for a 16x2 OLED I had on hand but did not work with my Adriuno programming. I had to switch to a 132x28 OLED .91 and I did not want to have to redo the plywood. So I…
An update to an earlier design with a proper ft/ftduino-compatible 6-pin connector. There' at least two versions of these things available, that's why there is a short and a long version of the top part. If you are interested in making…
Case housing ESP32, 128x32 OLED screen, TP4056 on top of ESP32 and a 1500 mAh Li-Po battery below everything.
LaskaKit OLED displej 128x32 0.91" I2C 3D model vývojové desky LaskaKit OLED displej 128x32 0.91" I2C Stránka produktu: https://www.laskakit.cz/laskakit-oled-displej-128x32-0-91--i--c/?variantId=14247 Github:…
A module for famous snap together raspberry case. Made for 3007 fan and small 128x32 lcd screen.
This is model for case ESP32 with Oled 128x32 and button
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
I added an OLED since I bought OLEDs and what I thought were 40mm fans but were actually 30mm fans.
Storage box for five pieces OLED display with soldered pins.
Added the slot for the top flex cable. Improved the walls for holding the LCD.
Oled for my NanoKey Project
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
Added the slot for the top flex cable. Improved the walls for holding the LCD.
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
