20 models
This is a zero clearance insert for Metabo C12RSH2S. Also marketed under Hikoki and Hitachi. The plate should also fit the respective predecessor C12RSH. The insert is 464mm along its length so do your math and download the file that fits…
How to print Print the ports with the flat face down. You are going to need to rotate the model by 30 degrees to make it lay flat or use the ‘lay on face’ feature within your slicing software. You are going to need a small amount of…
Since the RPC1-12RB-6P(72) is EOL I designed a 3D printed drop-in replacement for the AxxSolder project. Housing The housing can be sources from JLC3DP.com With the following parameters: MJF (NYLON) with PA12-HP Nylon PCB The gerber files…
UPDATE 11/25/24: Added 2 new versions. Short bumper is designed to run bodies like the CRC Lola and the Long is for bodies like the CRC Toyota. Bumpers have also been rounded out. Printed with Overture TPU @ 20% infill
Allows you to replace the stock PSU with the popular Mean Well LRS-350-12RS PSU for Prusa MK2 based printers.
This greatly satisfied my ammo capacity concerns on the battlefield.
this mag coupler is not for use with a TIPX marker. but it will work with the tipx mag adapters. and will not work with the pouch that is designed by me. or you could but only use the 2 on the our side and use a normal on in the middel.…
Simple sunshade/hood for dash mounted Oneplus 12R (with bumper case). Easy to adapt to your particular phone/case by adjusting the "internal" box measurements to the outer dimensions of your phone in tinkercad. Printed in PETG in an…
Replacement bracket for Fenix HL12R V2.0 headlamp. This model is a bit thicker compared to the included one, with wider headband tabs as well (one of mine broken, that's the main reason the model was created). Angle adjustment is on a…
I inspect prefabricated equipment shelters designed to hold radio transmission equipment as a part of my job, and I use this circuit tester to confirm that all of the outlets are wired correctly. My problem is that if the tester falls to…
Global tomographic models of seismic velocity provide us with crucial information about the planet’s interior. Here, we represent S wave velocity variation such that slow velocities stand proud and fast velocities as depressions. To…
Reduction from M6 to M12 rear wheels for Tamiya 1/14 scale model.
A quick keyring for my ZX-12R Category: 3D Printing
I took the drawings of the GoBidla adapater turning the 5203 312 rpm motor into a 6000 rpm motor by replaceing the 19.2:1 gearing down to a 1:1. I have successful tests with this motor and an Artifact shooting it 12 ft across the room at…
Coppia di Manopole Volume e Squelch per Radio Veicolari YAESU Serie FT-212RH FT-712RH FT-912R
The FSL becomes a pretty handsome driver once you add the ring. I have not performed any before/after measurements, but I'm sure it cuts down on diffraction from the lip as well. Settings I used: 4 wall loops 30% gyroid infill .16mm layer…
I made this to stick onto my 12rd P365 mags so that they'd sit flush in an Icarus ACE Evo grip module because this dang thing was expensive enough and no way way I going spend additional hundreds outfitting my mags with their special…
Nostalgiczny powrót do czasów Amigi 1200.
