Counting matching models…
Model description Concorde was the first commercial supersonic passenger airplane, built jointly by aircraft manufacturers in Great Britain and France. From 1976 to 2003, it halved the time it took to cross the Atlantic Ocean by flying at…
Model description The 747-400 is a wide-body airliner, an advanced variant of the initial 747. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. It typically accommodates 416 passengers in…
Model description The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50…
Model description The Airbus A220 (also known as the Bombardier C Series) represents the fusion of performance and technology. The A220’s advanced aerodynamics combined with the Pratt & Whitney PurePower PW1500G geared turbofan engines…
Model description The Boeing 747-8 is a wide-body airliner developed by Boeing Commercial Airplanes, and the largest variant of the 747. After introducing the 747-400, Boeing considered larger 747 versions as alternatives to the Airbus…
Gundam EZ 8 - 8 th ms team 1/144 scale (1:144) this gundam model is from psp game gundam vs gundam from the anime gundam 8th ms team, the later model that repaired (dont have classic gundam head) is in scale 1/144 like all gunpla but not…
Model description The Boeing 747-100, which was launched in 1966, was the original variant of the Boeing 747. Compared to later versions of the 747, the early Boeing 747-100s only had three windows per side on its upper deck. However,…
Model description The McDonnell Douglas MD-11 is a three-engine medium to long-range wide body airliner, with two engines mounted under wing and a third engine at the base of the vertical stabilizer. It is an evolution of the DC-10,…
I'm sharing modified 1:144 scale models of SpaceX Super heavy - Starship I recommend printing in PLA with a layer height of 0.2mm and organic supports for parts where needed. The model is intended for more experienced printers. Print the…
This model is compatible with the lego system.
This model is compatible with the lego system.
This reduction gearbox is a great way to demonstrate to students how gear ratios compound (it's also just fun to have as a desk toy). Each compound gear has a 32-tooth and 8-tooth gear stacked resulting in a 4:1 gear ratio. With 9 gears…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale or for similar size model that can fit in their hand. The size of the handle is 2 x…
This is a 1:144 scale model of the SpaceX's Starship upper stage! It measures 62.5mm in diameter and approx. 370mm in height! This is the “Block 2” version of the ship, featured on flights 7-9 (so far)! This ship is based on an early…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
Minimalist and small for easy display Print Settings: 0.15mm Layer Height 10% Infill No Supports Dimensions: 90mm L x 60mm W x 80mm H
Originally designed for a diorama I am intending to build (on pause for shelter-in-place) for/with one of my students, this is a 1/144 mobile worker to display alongside an HG Gundam Barbatos. The goal was to balance detail, anime…
This is a 1:144 scale model of SpaceX's Super Heavy Booster, the first stage of the Starship rocket! It measures at 62.5mm in diameter and the booster + Hot Stage Ring is ~ 490mm tall! This is “Block 2” of the booster! Ship can be found…
As my trailer is parked outside I searched for a cap to protect the electric plug against humidity, dust. I found some nice models here, but at the end I decided to create my own. Fusion360 files included, so you can easily modify it, if…
A Glock For 1/144 Mecha Model Kits ( Or Mecha Musume Kits) (Gunpla, 30 Minute Missions, 30 Minute Sisters, Megami Device, Etc.) Print At 20% Infill With Normal Supports Remix Of:https://www.deviantart.com/grazekai/art/Glock-18C-923624662
Modified the original design to accomodate the upper 2 screw holes, making it more sturdy. 299 174 10.07 Category: R/C Vehicles
Universal (fits both L&R sides) front and rear swingarms for 144001 as well as new from the ground up front steering hub. Each part is tested to fit, installed on at least 1 car and driven for at least 1 full battery charge. Recommended…
This is a Linear tank for gundam seed, used by target practise by ZAFTs mobile suits until it was replaced by mobile suits towards the end of the bloody valentine war, but served on in second line units even into the 2nd valentine war as…
A minimal, protective half-case for the STM32 Nucleo-144 development boards, with heat set inserts and screws.
This model is compatible with the lego system.
During the development of GM mobile suit, several model of machine guns were designed as a backup to the GM's primary beam weapon with the 90mm GMG-MG79 being one of them. Unfortunately the beam spray gun while powerful has very short…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale or for similar size model that can fit in their hand. The size of the handle is 2 x…
A little case for the ST Microelectronics Nucleo-144 Development Kit. Check the list below for compatible boards. The board should sit quite firmly in the case itself and is held down by additional screws. The screw on the left side is…
My kids lost their lego. So I drew them a new one in f360. I also included a step. file if anyone wants to correct the tolerances. Print in PETG
Model From A Fallout New Vegas Mod, Scaled Down To Fit 1/144 or 1/12 Model Kits (Gundam, 30 Minute Missions/Sisters, Megami Device/Frame Arms Girl, etc) Print at 100% infill With Tree Supports
This is a 1/144 MAJ-V34 Jiachong a AFV from Human Reform League in Gundam 00. This is tiny, at 1/144 this is 51mm long, you will not print this at 1/144 on anything short of a dlp/sla printer. Test complete, all parts fit although handle…
Designed this to be simple and easy to print. The one in the photo is printed in TPU, as I figured it would withstand crashes a bit better. However, at this thickness it is a bit floppy.
For best effect print with PET-G (PLA is also fine, but the clips will be less flexible). Prints without supports. In the photo: NUCLEO-H563ZI
A Modified Demonic Weapon That Was Repurposed Into A Large Sword, It Is Full Of Demonic Energy Print At 20% Infill Scaled for 1/144 Mecha Model Kits (Gundam, Megami Device, 30 Minute Missions/Sisters, Etc)
Wltoys 144001 front and rear shock cover / Protector. Added front and back covers for upgrade towers (sold on AliExpress). Screwed from behind. thx, front protector remix from https://www.thingiverse.com/thing:4602685 Print Settings…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
Made it fit 144 bits. I also made a different model for the lid to be a little more recessed to allow for slightly taller bits, and also made one that's completely hollow to allow for bigger items. And made different variants with…
Gundam Stand 1/144 both peg and box style , requires support
The STL is only for the right side. You need to mirror it in X direction to get the left side too. You only need two M3x8mm screws. printed in ASA weight is ~3,2g
A collection of equipments known to have been used by Gjallarhorn's ubiquitous Graze mobile suit. The files within can be used to make the following gunpla accessories : GR-H01 Battleaxe Halberd GR-H02B Battle Blade (2 variants based on…
The latest iteration of 120mm automatic cannons employed from the onset of the war, MMP-78 brought with it many improvements over previous model in all metrics. An underslung grenade launcher compliment its increasingly-obsolete kinetic…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
This lovely 009 Pacer is an original design by David Malton, with some final touches by me. It can best be printed on a resin printer. I did not test it on a filament printer. Updated with new pin and hole couplings, which are much more…
This a 1/144 scale falcon 9. it's based on some photos and videos you can find on twitter, instagram and youtube . There is a .docx file name how to where you can find all the necessary instructions to build your own falcon 9 i also made…
Model Ripped From Hitman, Scaled Down To Fit 1/144 or 1/12 Mecha Model Kits (Gunpla, 30 Minute Missions/Sisters, Megami Device/Frame Arms Girl, etc) Print at 100% infill With Tree Supports
A Handheld Rail Cannon 1 1/144 Mecha Model Kits (Gundam, 30 Minute Missions/Sisters, Megami Device Etc) Print At 20% Infill
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale and it fits the30 Minute Mission/Sister Model Kit and as well the AMAIM…
Update 2: after some track time using the drift tires, I would change the spokes to be on the inside of the rim or in the sidewall as of now they take significant amount the tread. And maybe add some heat set threaded inserts for the rims…
Features: Flexible buttons. Reset button indicated with inset circle: Strong enclosure for impacts and transport Snap-fitting lid No hardware for assembly (only for optional fan) Mounting provided for 30mm fan (ensure your fan isn't too…
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured…
This design allows you to wall mount your Lego Star Wars UCS Snowspeeder horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how…
I captured this at The Victoria & Albert Museum using ReCap360 and my iPhone 6S. The scan was cleaned up in MeshMixer before uploading. I've also included the raw scan data if you'd like to process it yourself. Cast Of Luca della Robbia…
An assault rifle seen used by Gouf Custom in Zeonic Front video game. Supposedly based on the new MMP-80 Zaku machine gun, this weapon features a more rigid buttstock, scope mount, heavy-duty barrel. In turn it has a slower rate of fire…
A detailed 1:144 scale model of Blue Origin's New Glenn Heavy Lift Rocket Powered by 7 BE-4 methalox engines and 2 BE-3U hydrolox The centre engine can be pushed upwards to deploy the 6 landing legs Includes Blue Moon MKII as a payload…
pasek do modelu 14 3dsets HDT 144-3M-06 drukować z tpu
Video of build instructions Note: I printed in PLA with 50% infill. I tried once printing in PETG 50% infill but the material was too soft when using a strong band and the frame warped. So just a heads up on that, feel free to experiment…
Wltoys 144001 front and rear shock tower 3mm. SVG files added for cnc. Category: R/C Vehicles
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the…
This is a re-designed insulator for the 9 element 144MHz LFA PBP Yagi. The former insulator has a flaw. Birds, wind and virbration in the antenna makes the directors turn, which is very unwanted effect. The re-designed insulator fits over…
A wall mount for Wltoys 144001 RC buggy. There are 4 screw holes (4mm diameter, countersunk) to mount it to the wall. It holds the buggy by the rear swing arms. Category: R/C Vehicles
Falcon 1 model in 1:144 scale with separable stages. Extra parts needed: 2 6x3mm magnets
1/144 Heavy Sword For Mecha Model Kits Print At 100% Infill If It Is Too Small In Your Slicer Just Scale It To 10000% Credit For Ripping The Original Model: https://www.deviantart.com/grazekai/art/Combined-Sword-913585642
Printed from PLA Nozzle 0,4 Layer height 0,2mm no supports CA glue used for assembly
This is a detail set for the 1/144 M61A5 from the Zaku ground war set. With this you get a new turret bustle, 2 mg, smoke lunchers, recognition panels, and a mine plough.
A Modified Laser Rifle Turned Into A Hand Held Version, It Also Has A Lot Of Demonic Energy To It. Print At 20% Infill With Tree Supports. Scaled For 1/144 Mecha Model Kits (Gundam, Megami Device, 30 Minute Missions/Sisters, Etc).
parts that you cant buy separately, but breakes often, reinforced design for FDM printing, print solid
This is a replacement 3D model I created for a friend for his WLTOYS RC car for the front knuckle. This uses the stock dimensions and has enough clearance to make the steering arm thicker if needed. Recommend printing it vertically…
I really like the Nucleo-64 and Nucleo-144 boards. They have Cortex-M 32 bit processors on them, are supported by a wide variety of development environments (gcc, mbed, Etc.) and with an Arduino compatible set of connectors, many Arduino…
This is a conversion kit for the 1/144 HG Guntank to turn it into a rx 75 Berrge Guntank an ARV version of the guntank seen in the intro to 8th MS team. Due to small parts, I recommend to only print with a DLP or SLA printer, as many…
stands for 1/144 gundam to fit action base one connector. in the factions of gundam seed. ZAFT and OMNI are done. Orb updated with connector parts, the others will work without glue but the Orb one dose need glue. Category: Model Robots
For use on sand (beaches). Might not work so well on other terrain. The bigger diameter (~90mm) gives more room for speed and should work better with bumps. The hexagonal hole is a tight fit depending on your printer tuning. Front wheel…
I havent printed this model yet and If you decided to print please share your feedback on the model. This sword is design for Gundam with the 1/144 scale or for similar size model that can fit in their hand. The size of the handle is 2 x…
A Imperial Sword Scaled For 1/144 Mecha Kits (Gundam, 30 Minute Missions/Sisters, Megami Device Etc) Print At 20% Infill
This model is compatible with the lego system.
someone on FB asked for a broadsword for a gundam, so here it is, not tested but should work on SLA/DLP/MSLA printers. FDM will not work. Category: Model Robots
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Looking for MORE upgrades for your enclosure? Consider…
A GoPro Mount Fit on Wltoys XKS 144001
Laconian Kylix in the Academic Arts Museum of the University of Bonn (Inv. 3144) Added uv texture displacement. Minor Smoothing after displacement. Left some room for further smoothing on your own part if that is your preference.
This release includes all the act 1 weapons from ULTRAKILL (excluding the alternate variants) accurately re created in model kit form Intended for 5 inch figures, it can be used by our ultrakill figures and figures from other manufactures…
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
This model is compatible with the lego system.
2-part enclosure to house and mount a A3144 hall sensor. I printed with 50% infill in PETG. For cable I used 5mm microphone cable.
// DREMEL wall stand for 144 tools // 91g - 30,37m No support, 0,2mm PLA Dimensions : 153,8 x 101,1 x 24,3 mm
Highly detailed. 1 meter consisting of individual LED segments. Can be combined to the length needed
This is a stand for any mobile suit Cagalli piloted from gundam seed in 1/144, will fitting action base 1. WIP as note tested. original image from Janet Fin. Category: Model Robots
This dust plug for SCBA cylinders features a G5/8 thread and replicates the fit of the original metal plug. It includes a built-in safety vent mechanism — the center hole contains two sacrificial layers that rupture if the cylinder is…
Wltoys 144001 top deck 2mm and spur cover. added: 3mm, 4mm and 5mm thickness. SVG files added for cnc. Category: R/C Vehicles
Opony polecam drukować z TPU, świetnie się do tego nadaje. Resztę wydrukowałem z PLA. Przy druku z TPU lepiej wyłączyć retrakcję i jeżeli posiadasz drukarkę z ekstruderem bowden zmniejszyć prędkość drukowania do około 30mm/s.
The Tupolev Tu-144 was a Soviet supersonic passenger jet developed in the 1960s as a response to the Concorde. It was the first SST to fly, achieving its maiden flight in 1968. Capable of reaching speeds over Mach 2, the Tu-144 was an…
I needed a bigger bumper cause my kids keep breaking parts.
A rapid-fire autocannon designed for Gjallarhorn's ubiquitous Graze mobile suit. It has a drastic fire rate improvement compared to the previous semi-automatic models, coupled with the revolutionary double-feed mechanism that receive…
It's a jordan for a gundam. You can probably rescale it to fit other kits, I lost the blender file but it's not hard to edit. I made it to connect to the foot on the Build Strike Gundam Full Package, I'm not a massive gunpla guy (I've got…
This is a 1/144 heavy machine gun meant for high grade kits. The suit this was designed for was the 1/144 Leo, however it will work with most HG kits. This has all parts, pre supported files, instructions and fully assembled files in case…
