P
PrintablesTomasz P.
UniFi US-8-150W Rack mount 10 inch
10 inch rack mount for UniFi US-8-150W. Required 2 pcs. square nuts rack.
- Downloads
- 570
- Likes
- 42
- Rating
- 5
Search results: 150w
Counting matching models…
P
Printables1Eye
Ubiquiti UniFi Switch 8 (150W) rack mount spacer
Spacer that allows me to mount my UniFi switch on a full width rack. Print instructions Printed using Slic3r defaults for .2mm Generic PLA.
- Downloads
- 329
- Likes
- 38
- Rating
- 4.67
P
PrintablesStigern
Unifi US-8-150W 19" Rack mount spacer
Print in PETG, needs around 30% infill 3 walls to make it sturdy enough.
- Downloads
- 217
- Likes
- 30
- Rating
- 0
P
PrintablesChris P
Ubiquiti UniFi Switch 8 POE-150W Stand
I wanted to route the cables for this switch ( https://www.ubnt.com/unifi-switching/unifi-switch-8-150w/ ) underneath. And designed a stand to do so...have fun Print instructions Category: Computer Print Settings Printer Brand: Prusa…
- Downloads
- 211
- Likes
- 24
- Rating
- 5
P
PrintablesRed Haniwa
Accessible Boost 150w and Buck 300w converter case
I like how the original design expose heat-sinks for better cooling, while remain pretty sleek. I remixed this design to: Make it a bit longer (a few mm) since the original didn't fit my 300w XL4016 buck converter board. I think the…
- Downloads
- 165
- Likes
- 27
- Rating
- 0
P
PrintablesSemOn
UniFi US-8-150W - Change power supply EPP-150-48
Bei meinem Unify Switch US-8-150W ist das Netzteil ausgefallen, darum habe ich nach einem Ersatz gesucht. Das EPP-150-48 passt perfekt, ist aber von den Maßen her deutlich kleiner als das Original. Darum habe ich diese Halterung…
- Downloads
- 162
- Likes
- 11
- Rating
- 0
P
PrintablesAsadchaq
Atorch CL24R 150W
Variace na Atorch DL24 - úprava krabičky pro verzi CL24R 150W
- Downloads
- 156
- Likes
- 11
- Rating
- 0
P
PrintablesOsfald
HP 150W charger power adapter supply hanger holder
My HP laptop spends most of time on the desk. So, I had to find the way to hang its charger under the desk top, that it doesn't take up additional space. That is the result, a simple hanger for HP 150W charger (type: L48757-003). If you…
- Downloads
- 129
- Likes
- 13
- Rating
- 5
P
PrintablesScott
AOKoda 150W Discharger For Lipo Batteries
Thanks to @Mhodder (thingiverse) for the original model AND posting STEP files so I could easily edit them!!! I made the following changes to dramatically reduce the BOM and assembly time: No soldering needed! Just seat the controller box…
- Downloads
- 127
- Likes
- 7
- Rating
- 4.67
P
PrintablesRoger M
Unifi Switch 8 150w stand with space for the Cloud key
Holder/standoff for the Ubiquiti UniFi Switch 8 150w. This one is mounted to the switch with one of the screws that came with the switch. There is space underneath to put the UniFi Cloud Key. The f3d file is also included so feel free to…
- Downloads
- 116
- Likes
- 22
- Rating
- 5
P
Printablesmikrom
Case for dummy load 150W 200V 20A
I recently ordered this electronic load from Aliexpress ( 200V 150W Adjustable Constant Current Electronic Load Battery USB Tester DC 12V 24V Lead-acid lithium Discharge Capacity Meter ), and I was surprised there is no available case for…
- Downloads
- 104
- Likes
- 11
- Rating
- 5
P
PrintablesMwirenfeldt
Unifi 8-150W 2x Raspberry Trays
Print with the front facing towards the bed. No support is needed Fits Roberts Raspberry Pi Trays. https://www.printables.com/model/69176-1u-raspberry-pi-rack-with-moduler-trays
- Downloads
- 100
- Likes
- 24
- Rating
- 5
P
PrintablesMaster2386
Ubiquiti UniFi US-8-150W VESA Mount
Ubiquiti UniFi US-8-150W VESA Mount Mount a UniFi US-8-150W Switch on the Backside of a TV to the 300x200 VESA Mount. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Category: DIY
- Downloads
- 96
- Likes
- 12
- Rating
- 1
P
PrintablesParagon
LED Lamp DIY 150W - Reef Aquarium Lamp V1
Kompletna Lampa Led do akwarium morskiego lub słodkowodnego, jest to cały projekt lampy led z obudowa elektroniki oraz elementami lampy led do lampy potrzebne są jeszcze: Lista części:…
- Downloads
- 74
- Likes
- 10
- Rating
- 0
P
PrintablesRatisse
DL24 150w rechargeable case
ENGLISH -------------- I wanted to make this electronic load autonomous, rechargeable, more practical to use and equipped with a small box to store the accessories. I also wanted to be able to move it easily and store it vertically to…
- Downloads
- 73
- Likes
- 5
- Rating
- 0
P
Printablesari.mandjelikian
UniFi US-8-150W 19" Rack Mount with Raspberry pi mount
UniFi US-8-150W 19" Rack Mount with Raspberry pi mount
- Downloads
- 64
- Likes
- 5
- Rating
- 5
P
PrintablesLammesky
step-up DC Volt-booster 150w case for my Mackbook pro
step-up Volt-booster 150w case for my Mackbook pro with volt meter. Use it in my car and in my caravan so i don´t need to carry the original charger. 150W Boost Converter DC-DC 10-32V to 12-35V Step Up Voltage Charger Module.…
- Downloads
- 55
- Likes
- 1
- Rating
- 0
P
Printables0x90
Unifi Switch - US-16-150W PSU Adapter for MW EPP-150-48
Threw this model together so I could get one of my older Unifi switches back up and running. The US-16-150W (and likely the larger variants) have known PSU issues. This bracket mates right up to it, and a Mean Well EPP-150-48. Got the…
- Downloads
- 49
- Likes
- 3
- Rating
- 0
P
PrintablesConfusias
UniFi US-8-150W 19" Rack Backet
Printable bracket for mounting a US-8-150W in a 19" rack. FYI, some would consider my print settings excessive. No supports are required, but I print with them anyway… Filament: PETG Walls: 4 Infill: 40% Top/Bottom Solid Layers: 5 202609…
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
PrintablesLeon Huste
TPA3116DA Mini 150W mono amplifier case
Simple case for a cheap TPA3116DA mono 150w class D amplifier board
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
PrintablesNobser
Mr Baddeley Shells/Battery Boxes for 150W drive
This is a modification of the original Mr Baddeley files. Due to the larger size of the 150W electric drive, some modification to the shell and battery boxes have to be made to make it fit. I also added rails for mounting a specific…
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesMixmeister
unifi us-8-150w 19 - Inch rack mount 2u
19" 2u Rack mount for unifi us-8-150w There are side panels, with ore without keystone slots. Parts 5x M5 Hex nut. 5x M5 Screw. 4x M3 X 6 MM for the Back - stop This should be printed in Petg happy printing.
- Downloads
- 42
- Likes
- 7
- Rating
- 5
P
PrintablesLaskaKit
LaskaKit krabička pro 150W elektronickou zátěž
LaskaKit krabička pro 150W elektronickou zátěž Krabičky pro 150W elektronickou zátěž, která se skládá ze dvou částí. Elektronická zátěž je schopná fungovat s napětím až 200V, proudem až 20A při celkovém ztrátovém výkonu 150W. Elektronická…
- Downloads
- 32
- Likes
- 3
- Rating
- 0
P
PrintablesTheLogical
Unify US-8-150W 10" Rack
My Unify US-8-150W didnt't fit my 10" Serverrack, so i designed my owm model for it with the PSU beeing externally placed and connected with an TX60 plug. For the heatsink i used 25x25x5mm heatsinks to keep the parts cool.…
- Downloads
- 30
- Likes
- 8
- Rating
- 0
P
PrintablesPrintaBros
Snoot / Egg Crate for 150W LED house Light
The house lights in a venue I work in have a low angle glare that comes off the lens, so I made this model to cut that out as much as possible with mininimal change to the main beam of the light. The ‘snoot only’ model cuts out the bulk…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
Printablesmrmoralhazard
Power socket mount for Fractal Design Node 304 and Akasa 150W Pico PSU
A mount for the 12V power plug of the Akasa 150W pico PSU, that replaces the original 230V plug in the rear of the Fractal Design Node 304 case. I used m2 screws and nuts for the inner holes and the original screws for the outer ones. Can…
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
Printableswolf9545
Sigelei 150W TC vape holder
When my wife goes to rebuild her Sigelei 150W TC vape, it sometimes gets knocked over due to the top heavy design. I decided to create a simple holder to help stop it from falling. All you have to do is just insert the vape into the…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesCVS1401
150w heater flat panel mount
I bought this 150w heater/fan to add to my Anycubic Photon S. I found out after I ordered it that the mount on the heater is for a curved surface (like a pipe?). So I modeled this adapter bracket to mount it on the flat side of my Photon…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
Printablesksaize
SlimQ 150w holder/ stand
Designed specifically for SlimQ 150w charger so the charger sits vertically.
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesmultifunk
ALKO Robolinho 1150W Wheel Adapter
The wheel connections on the Robolinho 500e/w models are 10mm shorter than the 1150w. The BLDC motor and gearing are the same. This adapter makes it possible to use 500e/w motors on the 1150w (and possibly also bigger models) without…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesPaFcio
HP TPN-DA03 150w Power Brick Bracket
Bracket for HP TPN-DA03 150w power brick / power supply. Designed to be mounted vertically on 2020 extrusion. Includes holes for velcro to keep cables tidy. Prints without supports.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesSponge
AOK 150W 3in1 Case
This is a case for the AOK 150W 3in1 discarger. I printed it in ABS because the bulbs get hot. http://bit.ly/3rh6Umn This is a tight fit :) Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 19 Category:…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesnawntench
Sigelei 150w box mod TPU case
just a replacement TPU case for the old Sigelei 150w box mod
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablesmartinwoodward
harvst power supply mount (150w)
I have a harvst WaterMate / Harvst Mini (2024) 4-season model. It is mains powered and I wanted a mount to allow me to attach it to the greenhouse using standard M6 greenhouse bolts. Printed with supports enabled.
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
Printables
Ubiquiti US-8-150W 19" Brace
A brace to extend the Rack Mount Ears of an US-8-150W to fit into a 19" Rack. Uses M4 Nuts to secure the Ears. You will need: 4 x M4 Countersunk Screws > 6mm 4 x M4 Non-Countersunk Screws > 6mm 4 x M4 Nuts 4 x M4 Washers
P
Printables
Ubiquiti Unifi Switch 150w With Keystone
Printed with default settings. I used a MK4S with MMU3. Didn't use the color changing but it might be fun to color code each of the ports, With a 5 color change system there would have to be an arrangement of blue, blue-white, green,…
P
Printables
Ubiquiti UniFi US-8-150W VESA 200 Mount
Print it on the side PETG or ABS recommended Infill 25% - 50% Needs support Mount it with the original Unifi switch US-8-150W screws (8 x M4) and 2 x M6 or M8 screws to the TV VESA Screws to the TV VESA may need to be very long depending…
P
Printables
Laptop Charger Mount (ASUS 150W)
Ever feel frustrated about keeping your laptop charger on your desk? Does it take too much space? This 2hr print can fix just that! i forgot to add the screw holes in the stl.. but u can easily create one using a drill or just editing the…
P
Printables
Cuboid 150W Cupholder Stand
Cupholder Stand for Cuboid 150W box mod, dabber and concentrates container. Category: Organization
P
Printables
Voron 0.2 Meanwell 150W PSU Quick-Release Din Clip
Enhance your 3D printing experience with our custom-designed Quick-Release Din Clip for the Voron 0.2 Meanwell 150W PSU. Precision-engineered for performance and ease, this clip facilitates the effortless attachment and detachment of your…
P
Printables
Unifi - US-16-150W PSU Adapter
Summary A PSU Adapter to fit a MeanWell EPP-150-48 into a US-16-150W switch from Unifi Needed parts 4x M3 Washers 8x M3 Nuts 4x M3*8 Screws Print Settings Printer: Artillery Sidewinder X1 Rafts: Doesn't Matter Supports: Yes Resolution:…
P
Printables
Rack Ears / Mount for Unifi Switch 8 PoE (150W)
Modified rack ears for Unifi Switch 8 PoE - made wider as the switch is quite narrow.