Counting matching models…
I needed this one, the others I found on Thingverse and here, where a bit crap. It has a description on the inside. I made it so it prints without supports. It is also correct up to 1%. (Although I didn't account for the letters) It is 1…
My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…
Staircase tube rack. Rows have differing elevation for easy access to each tube 2x6 15mL conical Falcon tubes, 2x5 50mL conical Falcon tubes. Holds a total of 22 tubes. No supports needed. Base is mostly hollowed out to decrease amount of…
Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: thickness = 1 gripDia = 2.5 gripAngle = 20.0…
Rack for up to 10 Eppendorf Tubes or 5ml falcon tubes. For easy one-handed access to the lids. Printed at 0.2 mm layer height, 30% infill, No supports needed. Printed in ABS for ethanol resistance.
Space-saving tablespoon fits inside your powder can. Normal tablespoon is too long because of the handle and it usually won't fit inside my chai powder or hot chocolate powder can. It's accurately 15ml.
Customized version of http://www.thingiverse.com/thing:114369 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=114369 Instructions Using the following options: gripAngle = 0.0 gripLen = 80.0 thickness = 1…
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
This is a 15ml centrifuge tube holder I designed for holding nutrient blends for making mead. It also works for anything that will fit in a centrifuge tube. It is designed to be stackable, with a small imprint on the bottom of the rack to…
Bonjour, Voici un bouchon de remplacement pour les tubes à centrifuger coniques de 15ml ( http://www.cloup.fr/type.php?code=Tp2041&scat_id=147 ) Les bouchons d'origine ne sont pas très solides. Le fond du bouchon est conique afin…
This design is a series of holders for 15ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. There are two versions named "compact" and "stable". They differ by the size of the legs: "compact" has smaller legs while "stable" has…
-PETG -no supports -any %infill 2023, MN
essential oil display, special for 15ML bottles, perfect for placing 5 ml bottles
The rack is compatible with pipetting robots like Opentrons OT-2. With the Opentrons systems, you can use the standard Falcon 6x15 mL Conical lab-ware definition. Still, lab-ware position calibration is advised. The tubes are kept firmly…
Just a rack, snap it in place
Ever feel like you're losing track of probes, buffers, and washing tubes during pH calibration? This all-in-one pH Probe Calibration Station can be your new best friend. It keeps everything organized and handy in one compact unit. The top…
Used for magnetic bead DNA extractions.
I made 2 x 8 Tube Rack for a friend of mine, who uses it at her work.
This is a simple organisation helper for your tubes in the ice box. This way the ice can touch and cool the sample tubes. No supports needed
5mL or 15mL + 50mL conical tube holder. We have something similar in the lab and I wanted more, so I made them!
A compact tablespoon measure (15 ml) for use in smaller jars. Easiest to print upside down
Since I couldn't find the right measuring cup, I made my own. It holds exactly 15 ml up to the mark.
A friend who works in a research lab needed some test tube racks for some conical test tubes. Designed a rack with dovetailed sides, tolerances on the dovetails are pretty close, used a nylon hammer to persuade the racks together...if…
IMPORTANT: Make sure to scale the model down a bit in your slicer of choice. I didn't want to fiddle with the dimensions trying to get a perfect fit, so once I got it close enough. I just scaled it down a bit. Scaling it to 96% worked for…
When doing cell culture, I had a few different sized tubes I needed to keep track of. But these tubes were different sizes and were located in various places across the fridge. I wanted them all in 1 place so I designed a holder to keep…
For 5 pipes, holes designed with a diameter of 17.5 mm. The spacing between the holes is 24mm. several model variants added. This model was inspired by this model: https://www.printables.com/model/904632-minimal-design-test-tube-rack
WARNING- USE AT OWN RISK! This is an experimental adaptor to allow a capillary tube to sit in a cup designed to hold a 15ml test tube, to be used in a bench-top clinical centrifuge. After breaking a few capillary tubes, I figured that the…
A holder box for 9x DoTerra 15ml bottles. Custom-made to hold 9 essential oils, making it easy to transport your oils wherever you go. Box Dimensions: 135x135x30mm.
A 15ml scoop for mixing oil into gasoline at 3% for 2-stroke combustion engines. Use one scoop per half liter (500ml) of gasoline. Doesn't require any supports for printing.
50mL magnet tube holder made for magnetic bead purification assays. I've made a single and double version, as well as an adapter to accommodate 15mL tubes as well. Each side uses: 2 - 60mm x 10mm x 3mm bar magnets, and 1 - 12mm x 1.8mm…
Screw top for a 15ml Falcon Tube that pushes tissue down further to stop floaters. Useful for fixing tissues.
This is a very compact transport container for 6x 15mL falcon/corning tubes that doubles as a temporary light shield for use under the hood, replacing the dreaded tin foil. Optimized for a 0.4mm nozzle, 0.2mm layers. Print in black with…
holds 10x 15mL vials. Tested with plastic 15mL and holds about mid-vial
This model consists of 3 pieces: a base, a heavier and more durable base, and the arms. Arms and base can both be printed at 0.2mm layer height, no supports, in PLA or PETG. I would recommend PETG if they will be used around any type of…
Riešenie pre dobre tlačitelnu odmerku bez podpier z dvoch dielov, ktorá na spojenie využíva trenie medzi dvomi kuželami.
Sample tube holder to fit 50ml & 15ml Falcon tubes with additional support for Eppendorf and 3ml Tubes
A bracket to hold a 15mL bottle of PLA Gloop
We have excess amounts of these 15mL 20mm tubes we used in the Dynex DS2. They can be used in the Euroimmun Sprinter XL but sit precariously in the machine. I created this adapter so the tubes can be centered and sit securely in the…
About This is a pair of inserts for Altoids tins (or similar) to hold 15ml tubes and double as mixing wells. The 15mmInsert_v4.stl is deeper than the bottom-only insert and supports 2 paint tubes up to 15ml inside of an Altoids tin…
Just a lil blastoise doll for holding 15mL conicals. Hope it's a blast in the lab.
15ml lube holder long, to hold all 10 lubricants offered at Speed Cube Shop.
Short lube holder for Speed Cube Shop 15ml lubricants.
My father has difficulty reading the label on the bottle, but enjoys ingesting Di-Gize for upset stomach symptoms. He accidentally misread the label and ingested a non-ingestible product. This is to help anybody with the accessibility…
My father has difficulty reading the label on the bottle, but enjoys ingesting Di-Gize for upset stomach symptoms. He accidentally misread the label and ingested a non-ingestible product. This is to help anybody with the accessibility…
5mL or 15mL + 50mL conical tube holder. We have something similar in the lab and I wanted more, so I made them!
50mL magnet tube holder made for magnetic bead purification assays. I've made a single and double version, as well as an adapter to accommodate 15mL tubes as well. Each side uses: 2 - 60mm x 10mm x 3mm bar magnets, and 1 - 12mm x 1.8mm…
The original model links to a GitHub repo with a swift package. I adapted the code to generate a 15ml/15g scoop. For convenience, I uploaded it here in case anyone else needs a scoop in that size.
This simple tray was reversed engineered from existing 15ml test tube trays to support a request from a local testing company in need of more trays. Standard trays and specifically standard size openings for 15ml test tubes did not…
A holder tray for 11x DoTerra 15ml bottles. I sliced the holder of Rokapet to fit my a1 mini printer. with a printbed of 18x18x18cm
A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the…
Just a simple rack I made for my partner who was needing one as the lab had none! It can hold both 15ml Falcon Tubes as well as EDTA (blood sample) tubes. Using a completely stock Mini+ with Prusament PLA, no infill (meant to be light and…
Test tube racks for holding 15mL tubes in 50 and 100 quantities. designed to be printed vertically with no supports.
A miniature model of my Rack for 50mL Falcon and 15mL tube. Can take 5 50mL falcon and 12 15mL tubes
A smaller form factor to hold up to 3 50mLs or 3 15mL tubes. Can be printed with no supports and in PLA. The spacing is designed to be easy to grab the various tubes. The 15mL holder can also comfortably hold plastic cell culture tubes as…
I needed a holder for 6 15 ml falcon tubes. The one i was using was way to big, didn't fit two tubes next to each other with the caps attached and blocked the scales on the tubes. This fixes that and saves me a lot of bench space. This…
Made the 50 ml bottle so I obviously had to also make the 15ml bottle as it's smaller and more easily left on a desk
Customized version of http://www.thingiverse.com/thing:600508 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=600508 Instructions Using the following options: volume = 15 res = 50 wallThick = 1.04 pi =…
Originally designed to organize and transport 15 ml bottles with dropper for Australian Essences: Bottles can be: easily sorted bottle description can be easily read easily transported if needed, they can be protected by lid looks great…
