115 models
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version…
A mazda Miata body to be used with open z V16 chassis, it comes with a 90mm wheelbase, using screws fixation. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…
Found this file in one of my model download files from back in 2014 and thought I'd post it. I checked first to see it handn't already been uploaded here on thingverse and see that it has. The only difference I can see with this model is…
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Keyring with Volkswagen 1995 logo on it. I printed it with 0.2 mm layer, 100 % infill.
Experiment in tracing a picture and converting it to a 3d model. Printed on Prusa Mini using Prusament PETG with 15% infill at 0.20 layerheight, no support needed. Approximately 15 min printtime.
One of the few negatives of first gen Tacomas are their door handles which are known to crack. Some of the non-OEM handles are made out of a materiel that does not hold up in freezing temperatures. After snapping a handle this winter I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The factory gauges in my ‘95 NJ Pajero/Montero didn’t function, so I designed this adapter plate to be able to fit 2" generic gauges in their place. One piece and 2 piece option (uses M3x5x4 heat sets), both benefit from supports, but I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a Theater of Magic Trunk. Theater of Magic is a Bally 1995 pinball game that is quite well regarded. The trunk is a main target and the original and replacements crack and break. Occasionally flexible replacements have been made…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
After buying my pickup 5 years ago without a window crank knob I finally decided to fix the problem. Here is my solution to replacing a broken crank knob. Needed material: Qty:1 Window Crank Knob (3D printed) Qty:1 Washer (3D printed)…
"Batman Forever," released in 1995, marked a significant turning point in the Batman film franchise. Directed by Joel Schumacher, this installment saw Val Kilmer taking on the role of the Dark Knight, previously portrayed by Michael…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
An open source 3d model of the 1995 Kenner Crossbow Nerf blaster, recreated from scratch. Built upon prior work by Captain Slug and Lucian on NerfHaven. 3D Model Video Overview: https://www.youtube.com/watch?v=gofHQ6IpOhw This is my…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
3D Printed Model of a Lamborghini Diablo
Best made with PETG, but PLA works too. 6 layers bottom and top. 5 perimeters.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Based on ksihota 's Seatbelt Release Button, this version features nice printable Text. Options: PRESS (OEM Style, if you want it to look Original) VOLVO (if you want to express your Brand) 850 Recommendations: Filament: Anything solid,…
Replaces ceiling vents in VW Vanagon and Synchro vans, made to same dimensions as original vents. Materials Printed components and original mounting screws Assembly Align the Vent flaps and attach them to the linkage plate, putting the…
Apollo 13 - "Houston, we have a problem" - 1995 3D printable model.
Celebrate automotive excellence with this 3D printable STL model of the 1995 Ferrari F50. This supercar masterpiece model is perfect for automotive enthusiasts looking to display the exhilarating design and raw power of this iconic…
Batman - Suit Collection - Batman Forever -1995 3D printable model.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. Collect all the CarSilhouette!
Major Payne - 1995 3D printable model.
Add switches to the factory blanked-off places on the dash/console area. ‘Loose’ and ‘snug’ refer to the hole for the switch, not for the plate to dash itself. Scaling up/down a few percent will help fitment in that case if required - I…
This is a 3D scan of a cover for the interior handle of a Nissan Terrano II (MY1995). The files provided are as follows: Fusion_C_7 - Copy_0.4n_0.2mm_PETG_COREONE_4h42m.bgcode is the bgcode I used for printing. nissan terrano II handle…
Batman Forever - Robin - 1995 3D printable model.
Car Radio Removal Tool for VW / Audi / Skoda / Seat This tool allows you to remove the original factory radios from many older VW Group cars, such as the VW Passat B5 , as well as certain Audi, Skoda, and Seat models. It replicates the…
Speaker ring. Sized for stock screws into the door plate and #8 for the speaker. Made for Morel 602's. I am sure it would fit other speakers fine, but I did not have any to test. Only has 4 holes for mounting (it holds speakers at an…
It's a replacement for (in my case broken) car key body. Coloring Just stop the print after 4.4mm printing height and change the filament for the next 0.4mm. before changing back to the initial color for the last 0.3mm. I attached a 3mf…
The Prophecy - Gabriel (Christopher Walken) - 1995 3D printable model.
My old sunvisor clips broke due to age so i made some new. Would recommend printing it in something quite heat resistant.
Tommy Boy - 1995 3D printable model. Super easy to print!
HONDA CBR900RR PETCOCK Fuel Tap (1995-1999) A Friend broke the Fuel Tap / Pet Cock on his Honda CBR 900RR. I think it was the 95-99 model. I model this in TinkerCAD from the original part, then Epoxy Glued the original. Printed in PETG…
Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4, PLA.
The Prophecy - Gabriel (Christopher Walken) - 1995 3D printable model.
Demon Knight - The Collector (Billy Zane) with Demons - 1995 3D printable model.
Matlock - Benjamin Leighton Matlock - 1986-1995
Matlock - Charlene Matlock - 1986-1995
The X-Filesl - Lanny the Conjoined Twin - 1995 - 2 Versions 3D printable model.
Demon Knight - The Collector (Billy Zane) - 1995 3D printable model.
Needed a fender clip for my 1995 Toyota Tacoma four-wheel drive, maybe someone else will find it useful :)
Modelo lo mas similar que pude a la original, sirve para mi mitsubishi colt GLX 1995 pero seguramente funcione tambien en Lancer y algunos modelos más. Fotos comparativas con la original (rota) aunque la impresa es una version anterior al…
THIS IS A SPROCKET for the engine/odometer for the Ford Mondeo Mk1 1993-1995
Dolores Claiborne - 1995 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
Alternative method to attach drawers from https://www.printables.com/model/719951 . Lower profile than the original clips. PLA, PETG etc, made mine PLA with 0.20mm
Demon Knight - Frank Brayker (William Sadler) - 1995 3D printable model.
Both poverty buttons were gutted by the previous owner to fit a switch each. Switches now don't work, left with gaping holes Did some CAD to replace the empty slot and fit a toggle button on the other side. 2 Options: “Empty” - just a…
Iconic Movie Villains - Se7en - John Doe - 1995
Demon Knight - The Blood Key - 1995 3D printable model.
it's the 90's baby and your mustang knows
I printed this model with a layer height of .05mm due to the detail, I had put some text on the bottom, since it is no longer there you may be able to do thicker layer lines. it has been modeled to be printed with manual color swaps,…
Matlock - Julie March = 1986-1995
As the description says. Print as oriented from PC, ABS, or PC/ABS blend, GF is a plus.. .2LH or smaller. 6 walls, 30% triangle infill.
Eyelid for 1995 to 2001 meaneye (impreza/wrx) Modelled based off a 3d scan of an eyelid, made thicker so it's actually printable. Reccommended plastic: PETG ASA ABS Any other uv stable & higher temp plastic supports: grid (i would…
Matlock - Tyler Hudson - 1986-1995
The original Denso sensor went out. Reverse-engineered it so I could use the much more common Denso sensors from newer models that have the 5VZ-FE motor. Fits the 1995-1999ish models, mine was made for a T100. You need M6 het set inserts,…
Cet engrenage est un composant de la voiture radiocommandée Inferno 4wd Kyosho ou No. 3281 des éditions de 1991 à 1995. Sur la notice fournie avec la voiture, cette pièce est la BS-56. Cet engrenage est composé de 53 dents pointues, de…
This adapter allows you to use inexpensive Amazon 1.5 DIN stereos in your Chevrolet OBS. It is compatible with 1995–1998 dashboards. 3MF Notes : The base file uses ABS as the primary filament and PETG as the interface layer. If you do not…
Window bracket for 1st generation extended cab Toyota Tacoma. After my bracket broke, I searched online for a replacement part only finding results for the rear window linkage, so I decided to give it a shot and make one! (attached is a…
This is used in conjunction with a 1/4 turn plastic screw to retain the intake baffle. This must be printed in a flexible filament. After turning the screw a quarter of a turn, it will bulge out the bottom part to lock it all in place. I…
Problem here is the product page 1995 – 66 Qt. Ultra™ Storage Box stock wheels included can be heavily loaded in shear & break easily stock wheels are plastic & are installed in a one-way fashion from the factory thanks to an “umbrella”…
The Chevrolet Express van knob swap for the A/C controls is a common mod. This allows you to use the same style of knob for your light switch, so all of your knobs can match! 3MF Notes : The base file uses ABS as the primary filament. ABS…
designed for Honda NSX type R 1992-1995 Racing
Blinker Bracket for the BMW F650 Made for 1995 model, but might fit others also Made to fit these lights: 2PCS BWS100 Motorfiets Voor en achter Richtingaanwijzer Blinker Indicator Flasher Lamp 12V Universele Modificatie Voor YaMAHA BWS…
replacement part for broken off plastic clips. printed with PETG.
Pommeau de vitesse Jumpy 1 (1995-2006) i broke mine so i print it
Logo Toulouse football club Old Logo de 1995-2000 i use a magnet de 8x1
This is a cap for the Mitsubishi Delica L400 Spacegear (Gen 1, 1995 ) Rear AC unit control panel Hot/Cold lever and Rear AC vent control lever. This cap has been modeled in Fusuon 360 and printed using Balbulab P1S. I have printed it…
pecock o-ring and gasket replacement for vfr 750
I have provided an .obj file and an .stl file for this model.
This is a custom-designed mesh vent cover for the Mitsubishi Delica L400 Series 1 (Gen 1, 1994–1997), specifically crafted to fit the factory fog light holes on the front bumper. The vent cover consists of two parts: a front mesh insert…
Made this for a 1995 Jeep Cherokee. It fits in the antenna pass through hole on the main body. Not the top of the fender! It's rained a couple times since install and so far so good it hasn't leaked. Printed in TPU with 4 or 5 walls and I…
A common failure point on the factory switch is the post which actuate the slide switch. This design beefs up the posts an extra 0.6mm. 3MF Notes : The base file uses ABS with PETG for the interface layers. An AMS is required. The NO AMS…
Nuts for the mud flap for Mercedes E‑Class W210‑S210, 1995–1999. Гайки под брызговик на мерседес е-класс w210-s210 1995-1999 Cделал для друга подумал что кому то может быть понадобится I did it for a friend; I thought someone might need it.
I wanted to add a fuse tap to my 1995 Honda Nighthawk. However I didn't want to damage the OEM fuse box. This spacer allows one fuse tap to be added to the 15A fuse. Attached is the freeCAD and STL of the model. In the first sketch, you…
Replacement catch for the Nerf Crossbow. Altered from the original stock part. Certain aspects of the design have been simplified for easier 3D printing. You may need to source a wider catch spring (the catch post is around 5.1mm…
replacement of a broken cap for an Ikea mug, avoiding to waste the whole mug. support needed for the part 2. after printing glue both parts (instant glue or epoxy as you prefer, i used instant glue as there is a large surface, so easy…
I am creating a slew of files to organize and play "Ultimate Robo Rally" and these are some flags design I made that are nice but are no the ones I settled on. 1994, 1995 Flag Token Clamshell: In the early versions of the game they gave…
The Chevrolet Express van knob swap for the A/C controls is a common mod. This allows you to print a matching knob for your light switch. 3MF Notes : The base file uses ABS as the primary filament. ABS or better is recommended due to the…
Control arm bushings for a 95-99 Dodge Neon. The sleeve will need to be sourced or reused from an older set of bushings. Recommend 100% infill using 95A TPU. STEP file included for easy changes. Grease generously and press them in by…
This is a pipe to replace the intake resonator/silencer on the 4.3L TBI intake for the 1988-1995 Chevrolet C1500 (OBS). 3MF Notes: If printing the split plate, ensure you are plastic welding the two parts together. This can be done inside…
This model requires a build volume of at least 220mm X 220mm X 220mm. The print orientation of the ShelfBracketV2_ReadyToPrint.stl file will provide an optimal print strength as the the bracket will be subject to stress, when installed in…
Could not find a tool that worked for my 1987 jeep wrangler to prevent proportioning valve from tripping while bleeding troublesome brakes. Only way i was able to reset it was to disconnect the brake lines and physically push it back with…
This boot fits over the driveshaft slip joint on a 1995 Bronco. Might fit others as well. This was hard to find so I just designed it and printed it out in TPU. Works just fine in protecting the joint from dirt, debris and moisture.
Celebrate automotive excellence with this 3D printable STL model of the 1995 Ferrari F50. This supercar masterpiece model is perfect for automotive enthusiasts looking to display the exhilarating design and raw power of this iconic…
Cet engrenage est un composant de la voiture radiocommandée Inferno 4wd Kyosho ou No. 3281 des éditions de 1991 à 1995. Sur la notice fournie avec la voiture, cette pièce est la BS-56. Cet engrenage est composé de 53 dents pointues, de…
Eyelid for 1995 to 2001 meaneye (impreza/wrx) Modelled based off a 3d scan of an eyelid, made thicker so it's actually printable. Reccommended plastic: PETG ASA ABS Any other uv stable & higher temp plastic supports: grid (i would…
Both poverty buttons were gutted by the previous owner to fit a switch each. Switches now don't work, left with gaping holes Did some CAD to replace the empty slot and fit a toggle button on the other side. 2 Options: “Empty” - just a…
The X-Filesl - Lanny the Conjoined Twin - 1995 - 2 Versions 3D printable model.
