Counting matching models…
The Door Handle Door Lock Rod Clip on my 1998 Honda Accord, this clip does the job as a replacement part. Tested on the front doors only so far, right and left doors need a mirror version but I've found the non-mirrored version also…
As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…
Here's a dodge ram grill emblem. I've included files to print it in two pieces or one piece. I printed the base in black and the logo in red to match my truck. There's a slight curve, so supports are required touching the build plate. I…
Das Modell habe ich mit Fusion 360 erstellt, mit 0,10 mm Detail und Stützen “gesliced” und mit 100% Infill in PLA ausgedruckt.
The Dodge Viper GTS-R is a legend in the world of motorsport, renowned for its victories in the GT2 category and its iconic presence in the 24 Hours of Le Mans. This 3D printed shell of the Viper GTS-R pays homage to the vehicle's storied…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I created this for first generation trackers?sidekicks/Suzukis heater A/C control knobs to be press fit replacements for stock lever knobs. Best done on resin printer but can be done on fdm with small enough nozzle and the right settings…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Ein Ersatzteil für den Gewindetrieb eines Spiegelstellmotor des Opel Astra H (Corsa D). Für den Druck sollte ein SLA Drucker verwendet werden. Da die einzelnen Segmente das Gewindetriebs im Überlastfall überspringen können müssen, wurde…
printed in zonestar Z8PM4 pro a 55 mm/s with 15% infill 200 T, with normal support from plate, if use branch dont take the elbow
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made a rear protection cover for the golf 4 vehicle spare part light Replacement part Enjoy!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Teil des Gelenkes der Dachhaube (40 x 40cm), welche im Zeitraum 1998-2001 in Fendt Wohnwagen verbaut wurden. Meinen Infos nach in folgenden Modellen/Modelljahren: 1998 Diamant 1999 Diamant, Platin, Saphir 2000-2001 Diamant, Platin für…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Saving Private Ryan - T4 Medic Irwin Wade - 1998
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Rush Hour - Carter (Chris Tucker) & Lee (Jackie Chan) - 1998 3D printable model.
Land Rover Defender 1998 Ashtray Blanking Plate Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament: Polymaker Polyflex PETG Black Notes: Land Rover Defender 1998 Ashtray…
идеально подходит
🏆 World Cup 1998 ⚽ 🇲🇽 Mexico The ABA jersey for Mexico in 1998 featured the Aztec Sun Stone (Tonatiuh). It has been taken as inspiration for the 2026 jersey by Adidas. It's very easy to print in colors, even without MMU/AMS. Order of…
This is a bumper for the center console on the 96-98 Jeep Grand Cherokee ZJs. I printed mine in Polymaker 95A TPU. I recommend cleaning up the old holes with a 10mm drill bit by hand (not in a drill!) and/or blade and/or wire cutters. One…
Pokus vytvořit náhradní díl změřením a namodelováním tisknutelné alternativy. Nejspíš bude nutno ještě lehce upravit
who to share a beer?
1998 Corsa B uyumlu kalorifer muzulu çizimi.
This is a replacement part for a Volkswagen Gold 1998 (Cabrio) We had the original seat grip broken off, it's used to change the drivers seat inclination. As this is my first 3D model I ever made feedback is most welcome. I haven't…
Honda Civic Ferio 1998 washer fluid lid Print Settings Printer Brand: Anycubic Printer: All-metal Mega Supports: No Infill: 100 Category: Replacement Parts
If you want to get this template without subscribing, write me in chat! - SideSilhouette
There are 3 different models: HoundeyeOriginal.stl - original low-poly model of a Houndeye from the Half-Life game Houndeye_WithEyes.stl - version with eyes modeled based on the original texture Houndeye_WithSupports.stl - same as…
Introduction The Car Vent Phone Mount is all in the name. Only recently have cars come equipped with Bluetooth and CarPlay, so the CVPM is the perfect, low-cost improvement to your driving experience by making your phone easy to see and…
I printed in ASA for heat resistance and durability. Printed on Sovol SV04. Friction seems to hold it in place pretty well, but you could aways add some double-sided tape or Velcro to the rear bottom tab to hold it more secure. I designed…
Hi! I needed a decent phone holder for my Volkswagen T4 (1997) so I designed one. Fits a Samsung S10 / S9 perfectly. Maybe even other phones. It is very easy to print. The holder consists of five small parts. The actual holder for the…
Ive made a cap for the nut to the wiper arm on an Mazda 323 BA from 1998. May fit other models. Ive printed the model upside down with TPU, 15% infill.
Becker - Ted Dansing - 1998-2004 3D printable model.
I designed this snap-fit keyless entry housing for a 2002 Ford Explorer Sport Trac after my step-son broke his. It prints well without supports and snaps together well. Super glue can be used to make it more permanent.
This is a remote key fob from a 1998 Chevy Suburban. It is for keyless entry remote key fob which will fit many years and models of chevy vehicles, estimated from 1996 to 2007. Just take a close look to see if the internal board, battery,…
Recomiendo imprimir en material resistente a altas temperaturas ya que en verano el interior del vehículo alcanza temperaturas capaces de deformar el PLA. En mi caso he impreso con ASA. Espero que os sea de utilidad. Agradezco a GeorgeVWP…
There are 2 different models: ChumtoadOriginal.stl - original low-poly model of a Chumtoad from the Half-Life game Chumtoad_WithEye.stl - version with eye modeled based on the original texture Be sure to enable supports for its belly!…
this is a model designed and draw be me to hold the car mats for my audi a3 1998. i could not find where to buy the pieces so i make new ones. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%…
This is a backup camera mount that replaces the tailgate handle bezel. 3MF Notes : The 'NO AMS' file uses standard support settings, and does not require an AMS The 'AMS' file uses a different material for supports, and requires an AMS.…
Заглушка дверной ручки вместо 72126SM4003ZA.
Original low-poly model of a Snark from the Half-Life game. It is better to print it on its back with supports for legs. Also check out other Half-Life models: Houndeye , Chumtoad
Card wells are sized for sleeved cards; sleeves in photos are Gamegenic Standard American size. No supports required.
Charmed - Props - Witch Wars Dagger - 1998-2006 3D printable model.
Replacement for original L200 elbow rest scale 1/10
The original Denso sensor went out. Reverse-engineered it so I could use the much more common Denso sensors from newer models that have the 5VZ-FE motor. Fits the 1995-1999ish models, mine was made for a T100. You need M6 het set inserts,…
Use a high temperature, possibly flexable filament. I used YXPolyer PA6 (no fibers). I suppose you could try a fairly stiff TPU, and could also try ASA/ABS, but I'm not sure how they'd hold up to the heat. See below for support sections.…
Charmed - Props - Life Essence Bottle - 1998-2006 3D printable model.
This adapter allows you to use inexpensive Amazon 1.5 DIN stereos in your Chevrolet OBS. It is compatible with 1995–1998 dashboards. 3MF Notes : The base file uses ABS as the primary filament and PETG as the interface layer. If you do not…
Subaru Impreza 22B STI 1998 Caricature
Ideal para poder personalizarlo y añadir otros tipos de interruptores necesarios en tu jimny, o simplemente tapar el hueco de una tapa perdida. Recomiendo imprimir en materiales resistentes al la temepratura.
Same as the original, just modified for the driver side.
Charmed - Props - Buddha's Mystical Staff - 1998-2006 3D printable model.
This tailgate handle bezel will fit all 1988-1998 OBS style Chevrolet pickup trucks 3MF Notes : The base file uses ASA as the primary filament. ASA is recommended due to the outside temperatures and UV exposure. ABS or PETG can be used,…
Replacement hinges for the visors on a 1998-2004 Mercedes SLK. Designed specifically from a 2003 SLK32 but should work on all R170 Mercedes. 1998 - 2004 SLK 230, 320, and 32AMG Designed in Fusion 360 This will be a work in progress for as…
Charmed - Props - Level 2 Demon Weapon - 1998-2006 3D printable model.
Adapter plate for my '98 E320 front door 6 ½" speakers. Might possibly have some clearance issues with the bottom door clips, my door were missing them before making this but I can see where they went and that there MIGHT be a clearance…
The Chevrolet Express van knob swap for the A/C controls is a common mod. This allows you to use the same style of knob for your light switch, so all of your knobs can match! 3MF Notes : The base file uses ABS as the primary filament. ABS…
# Denon DP-900M / Pioneer PL-PM2000 - Dust Cover Hinges Replacement hinges for turntable dust covers. The original plastic hinges are known to break after 25+ years of use. Why This Model? - Many of these used turntables are sold with…
Adaptador para encajar en los huecos libres de la lado de las luces antiniebla el termómetro de el enlace que pongo abajo, por si el vendedor desaparece pongo fotos del mismo. Recomiendo imprimir con filamentos que aguanten las…
Introducing our custom-designed oil seal seating tool, specifically made for the 1998-2001 Honda VFR800 motorcycle. This durable part is engineered to help you easily and accurately seat an oil seal into the fork tube of your VFR800.…
This is a battery box for use on the carb'd, belt drive Super Sports when you delete the stock airbox and use pod filters. It uses the pad from the stock battery box will only fit if you cut the tabs off the bottom of it. Assuming you…
sun clip for isuzu chevrolet luv trf pick up
Designed for an iPhone 15 Pro with a case on, specifically a Spigen Slim Armor CS. I included the fusion file for those that want to resize it. 2 versions, one with a vertical holder and one with a standby mode holder. Standby mode…
Why? The game is good but there are a lot of pieces and it is all thrown randomly in the box ... I have looked at other inserts/inlays for this game but none were quite what I envisioned so I made one myself :) What? I find it tightly…
3D Keychain – Nike Mercurial 1998 Relive the golden era of football with this exclusive 3D-printed keychain inspired by the iconic Nike Mercurial 1998 boots. Carefully crafted to replicate the original design, this mini replica pays…
Wanted to put Little Dog Air Freshener in my Land Rover 110 but it doesn't have vents. I created this plug to replace the plastic bung that was in my centre panel (lighter socket on the right empty space on the left) some defenders have a…
This model is for a 1998 Dodge Dakota w/ a 3.9L V6 Magnum. I used it to make custom derby headers.
pecock o-ring and gasket replacement for vfr 750
Replacement Door release Handle for 1998 Hyundai Lantra Printed in PC for strength. Fits well but needs holes cleaning out for perfect fitment
A common failure point on the factory switch is the post which actuate the slide switch. This design beefs up the posts an extra 0.6mm. 3MF Notes : The base file uses ABS with PETG for the interface layers. An AMS is required. The NO AMS…
While Restoring my 2003 Ford F150 Lightning, I installed new Front Mevotech TTX Upper control arms. When reinstalling the abs sensor cable, the clip that holds the cable to the control arm didn't fit anymore because of the TTX square…
print sideways so the layers are solid on the hinge sizing may need to be tweaked Category: Automotive
The Chevrolet Express van knob swap for the A/C controls is a common mod. This allows you to print a matching knob for your light switch. 3MF Notes : The base file uses ABS as the primary filament. ABS or better is recommended due to the…
Fits perfectly on the factory mountholes of the original speakers, can be customized to fit other speakers, but this on was made for 130mm speakers with 4 screws, brass threaded inserts needed Speaker height is 150mm
Replacement center dome light to sunroof bezel bracket for a 1998 Ford Explorer. May work on other second generation Ford Explorers with a sun roof. Existing hardware was reused (T10 plastic screws). See screenshots for original vs 3d…
A simple hardware organizer for Harley-Davidson Road Glide fairing removal. I had been using a piece of paper with a drawing of the fairing to keep track of where each screw came from, so I designed this as a reusable 3D-printed version…
Just a speaker adapter for a 2017 Subaru Crosstrek, didnt like how thin and flimsy the Metra 82-8901 was. I then re-designed one, it has both 4 bolt pattern and 3 bolt pattern for the speakers, it does what the metra 82-8901 does. The…
(Deutsch) Dieses 3D-gedruckte Ersatzteil ersetzt die originale Schaltmutter für ältere Sommer Twist 200E Drehtorantriebe (Baujahr ca. 1998). Die Schaltmutter läuft auf der Spindel des Antriebs und betätigt die Mikroschalter, die dem Motor…
Back in '97 Chevy came out with a factory truck that had 4.2l MWM 6.07 turbocharged inline 6 diesel that made around 170 horsepower (126 Kw) and 300 lb/ft of torque (406 Nm). Its top speed is around 104 mph (167 kmh) and can only be…
Original low-poly model of a Snark from the Half-Life game. It is better to print it on its back with supports for legs. Also check out other Half-Life models: Houndeye , Chumtoad
There are 3 different models: HoundeyeOriginal.stl - original low-poly model of a Houndeye from the Half-Life game Houndeye_WithEyes.stl - version with eyes modeled based on the original texture Houndeye_WithSupports.stl - same as…
There are 2 different models: ChumtoadOriginal.stl - original low-poly model of a Chumtoad from the Half-Life game Chumtoad_WithEye.stl - version with eye modeled based on the original texture Be sure to enable supports for its belly!…
# Denon DP-900M / Pioneer PL-PM2000 - Dust Cover Hinges Replacement hinges for turntable dust covers. The original plastic hinges are known to break after 25+ years of use. Why This Model? - Many of these used turntables are sold with…
This is a 3D model to replace the hinge on a Volvo S40 1998. May work on the V40. It's printed in ASA for the heat.
Video Games - Half-Life - Gordon Freeman 3D printable model.
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Hazard lights switch for 1998 Suzuki Jimny. This switch works exacly the same as the original one. You can choose between version with hazard lights symbol and with no symbol, you can even design it to your desire with Fusion 360 .f3d…
Lego 30120 Helmet UFO high quality part 1997-1998 print with supports, lay onto the forehead for best adhesion if fit is too tight print in 101-102% scale
