Hinges for turntable Denon DP-900M /Denon DP-900MII Quartz / Pioneer PL-PM2000 (1998-2000)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement dust cover hinges for Denon DP-900M/MII & Pioneer PL-PM2000 turntables. Original parts often break.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
# Denon DP-900M / Pioneer PL-PM2000 - Dust Cover Hinges
Replacement hinges for turntable dust covers. The original plastic hinges are known to break after 25+ years of use.
Why This Model? - Many of these used turntables are sold with damaged or missing hinges, so I designed my own that are fully compatible.
## Compatible Models:
Denon DP-900M Quartz (1998-2000) - Denon DP-900MII Quartz (1999+) - Pioneer PL-PM2000 Pure Malt (2000) - rebadged Denon DP-900M
Model Design: - Model consists of two parts: upper and lower - Designed based on the original hinge dimensions - Uses original pins and springs from the broken hinges (reuse these parts!)
## Print Settings:
Material:
PC Blend (recommended - I used this for my print) , ABS or ASA also suitable
⚠ DO NOT use PLA - insufficient strength for this application
Infill:
100% (mandatory for strength!)
Layer height:
0,15-0.2mmm
Supports:
YES - enable supports
Print Orientation (CRITICAL FOR STRENGTH!):
Upper part - Print ON THE SIDE (⚠ very important!)
Lower part: Print FLAT on the bed
(Wrong orientation will result in weak hinges that break easily)
## Assembly:
1. Remove the broken hinges from your turntable
2. Save the metal pins and springs from the original hinges
3. Install the 3D printed parts using the original pins and springs
4. No modifications to the turntable required
## Notes:
After 25+ years, these hinges commonly fail. This replacement will help restore full functionality to your vintage turntable.