Counting matching models…
ntdecke den Kultpilz als praktischen 3D-Druck-Container! Du kennst ihn aus Super Mario – der ikonische Pilz, der dir Power-Ups verleiht! Aber dieser Pilz kann noch mehr: Er ist nicht nur eine stylische Deko, sondern auch ein cleverer…
Super Mario coin for your Shopping cart. Print 100 of these for 1Up. With keyring hole
This is a modification for the 1up bike rack that allows one to more easily pull the raise/lower handle. It can be used with single or multi-bike racks, but only multi-bike racks that were purchased as an add-on to a single. With some…
Super Mario star coin for your Shopping cart. Print 100 of these for 1Up. Coin for European shopping cart. Form factor is a 1 euro coin, compatible with most carts. Just a simple and effective design. The ones in the picture have been…
This is a bat top replacement for the Arcade1up joystick with ball tops. Bat tops have a much better feel to me so I quickly made this to replace the ball top on my machine. Have installed these on three different machines without issue.…
Discover the Mini Cult Mushroom – now even cuter and just as practical! 🍄✨ This mini version of the popular 3D printed container is the perfect companion for small treasures that need to be stored well! Whether jewelry, coins or other…
This is 3Dprint1UPu's model that has been painted for MMU printing. You should just be able to slice and print. Everything has been taken care of.
Super Mario coin for your Shopping cart. Print 100 of these for 1Up.
9/11/24 Edited to add a file with a little looser tolerance. This should work a little better. As with anything with threads, the smaller the layer the better. I printed the best version with a .08mm layer and a slower print speed…
Thought I would design a more robust EZ pull handle for the 1up Heavy Duty bike rack. Everything was modeled for standard sized hardware, not metric; If there is enough interest, I can design parts to accommodate metric hardware as well.…
'tis what it is
Arcade 1UP feet to raise the cabinet. Print 4 of them. The cabinet can be raised further with additional modules (coming soon). The pieces in the photo were printed with a 0.8 nozzle, layer 0.4 and 7% infill. For greater stability you can…
HI, This is a remix, the original model is in https://www.thingiverse.com/thing:4611466 by WaikikiProd. I just scale it, (The read one is 100% and the green one is up to 120%).The make it hollow, add a hole to drain the excess of water…
Printed well with a .4mm nozzle at .2 layer height. Remove speaker grille before installing. New cover fits flush with the backbox
Why? If you have a 1UP rack there's a 99% chance your license plate is obscured. I know that's bad, but I wasn't about to pay $125 CAD for the basic plate holder from 1UP. Instead, I made this! Read Me Something something provided as-is,…
I find that no matter how tightly i push the bars down on my 1up, by the end of the drive something has shifted. This holder tightly grips the tires and keeps them from wobbling, which hopefully reduces the shifting around. For safety I…
Added a mount for storage when not in use for wall or pegboard.
I created a new wire guide for 1up bike racks which come with two bike trays. Works great in conjunction with the Easy Pull Handle Assembly for 1up Bike Rack by spiremtb . The wire guide is printed in PETG and snaps onto the support.
This is a drop-in replacement for the Arcade1up restrictor-plate found on the Gen1 and 2 Street Fighter cabs. This will replace the 4-way restrictor-plate allowing for a much more fluid circular motion. The real arcade cabs used 8way…
This is for 1up arcade cabinets to replace the ball control knob to a more authentic knob of classic arcades. Print Settings Printer: Adimlab Prusa I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Solutech PLA Notes: I used…
This is to mount an aftermarket HDMI board that reuse the monitor from a Arcade1Up cabinet in the original control board location. HDMI board https://www.amazon.ca/dp/B07ZVMWPZP?ref=ppx_yo2ov_dt_b_product_details&th=1 Category: Toys & Games
V2 Update: Design update includes a print-in-place snap door for the outer shell, bigger chambers that now slope inwards for extra ease of use, and magnets that can be reused fully from the V1. — Taking your daily medicine just got a…
Arcade1up 4 way Adapter restrictor plate is used to change your 8 way joystick to a 4 way for classic games like Pac-man. The plate when printed fits extremely tight so not to move while playing. It slides under the dust washer on the…
I have a Ride1Up Roadster V2 ebike that uses this display that is somewhat common on other ebikes. But the problem with it is the plastic is brittle and the clamp is just a bit smaller than my handlebar so you can't really tighten in all…
This mount was design for a 1Up wall-mounted arcade game, but could be used for anything that fits the groove provided. It has provisions for one #10 fastener if left unscaled. Two versions are attached. The STLs are for a low profile…
Currently sized at 9.6mm wide on the flat to flat inner dimension. I printed this at a very tight fit in PLA+ to be a permanent addition to my wrench handle. Given I was down to the last few wraps on the spool of filament, I printed it at…
Bracket top hold the Arcade1Up Marvel vs Capcom 2 PCB
These bushings go on both sides of the hitch lock provided with 1UP hitch-mounted bike racks. In my case I am using the Super Duty rack with a 2" hitch which measures a little over 2.5" outside (64.4mm). I printed these out of TPU with 3…
Mario 1UP Mushroom keychains or earrings Customize for Bambu Lab to print with AMS. Print with Green, Black, and White. Select all STLs and import all at once and when prompted to “Load these files as a single object with multiple parts?”…
Includes a jig for drilling holes in the 3/8" aluminum rod. Note the rod clearance is probably a little too tight, but it works for now. Includes a different keeper design that allows for more modular use. This design is more friendly for…
Arcade1up 2 way Adapter restrictor plate is used to change your 8 way joystick to a 2 way for classic games like Galaga. The plate when printed fits extremely tight so not to move while playing. It slides under the dust washer on the…
A creative trap tile with an 8-bit Mario theme. After trapping the first ball, a path opens with a cool flip down ramp - giving players a 1up! This tile is a remix of @andrewtho5942's original model from Thangs.com. Printing: The…
This is aa Arcade 1up Pac Man joystick base since I don't own a Street Fighter 2 1Up cabinet. I printed this in Translucent Orange PETG from Inland since the buttons will have lighting. Regular PETG at 5% infill will give the effect…
I don't own a table to set drinks on but I have an 1UP arcade! This is a simple cupholder to allow drinks such as soda cans and Yeti containers to be used while you play mess free! It slides on with no screws. its's made to be a little…
A little cap for the 1/4-20 bolt that sticks out and scrapes your leg when getting in and out of the trunk. I used PETG but anything will work I recommend using a support enforcer for the lower part of the cavity and no supports in the…
Nintendo Switch dock mount for those modding an arcad1up cabinet ( https://www.amazon.com/Fighting-Arcade1Up-Joysticks-Specially-Designed/dp/B08VJ8WRBK ) to connect to a Switch.
You can print in one go (for single color printers or hand painters) or you can print in parts (for multicolored prints.) Tested and printed on flashforge AD5X multicolor printer, and assembled after print.
This bracket will screw in where the original encoder board was. You can screw in 2 standard arcade push buttons. The smaller buttons are pushed from behind where the original toggle switches were before screwing in the bracket with the…
These battery terminal ‘grips’ take advantage of the M3 thread used in the 1UP Racing 5mm bullet connectors. So they are held by an 8mm M3 flat head screw and make it much easier to remove/install the bullet connector into a shorty pack,…
This filler bolt better protects the bolt holes used to mount add-on racks to your 1UP bike rack, or to attach add-ons to other add-ons better than the one-sided plugs provided with the racks and add-ons. I often switch between one, two,…
A 1-up mushroom coaster. No need for supports, infill between 5 and 15%. Size aprox 11 cm
Small bracket / holder in PLA for Superglue tubes (3ml). ~1 hr to print. Example printed in Polyalchemy Elixir Bronze 6mm hole in rear for screw mounting. Double sided tape would also work. Enjoy. Ps. If you print it and like it. PLEASE…
Models include stabilizers for the stock Lectric XP2, Lectric XP3, and also the base by itself which rests against the rack spool so you can model your own wheel stabilizer onto it as needed. Note - the base is for the full spool; I…
BETA RELEASE This is a beta release. I have printed this and it works well for me, but not sure if there are any errors in my readme and BOM. Intro: Emulating arcade games and miss the nostalgia of dropping quarters? Kids think they're…
I wanted to have a simple and protective case on my macropad, so I designed and made this with solidworks. This is for the original “Sweet 16” Macropad from 1up keyboards, modeled based off of using vogon_poetry's base . Settings I used:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.9x150.9mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 1.2mm and the Actual…
Dimensionally Accurate Spool for 1UP USA Quik Rack (QR), Heavy Duty (HD), Super Duty (SD, Pre 4/24), and Roof Rack Models.
1UpUSA makes a Super Duty bike tray that can mount either to their hitch frame or to T-track. It comes with milled aluminum blocks that can either act as plates positioned under rack cross bars, clamping the tray to a rack system, or…
Screw the piece in the threads beneath the mic then put the bolt and nut to tighten
This stand is designed to organize and store 1UP Card console cleaner cartridges along with commonly used retro game cleaning supplies. The layout provides dedicated slots for multiple cartridge-style cleaners, along with cylindrical and…
Standoffs for the 1up HSE keyboard kit. As described in step 6 of their assembly instructions https://wiki.1upkeyboards.com/doku.php?id=kit_instructions:keyboard_kits:step_by_step Sat down to put together their 60% keyboard kit and found…
Have always been annoyed using the supplied L-key on 1UP USA racks when trying to quickly tighten or loosen the main hitch bolt, or the bolts used to attach additional trays. This is a 3/8" bit (ideal for ratchet or impact wrench or…
LEVEL UP YOUR GAMING ROOM! 🍄🎮 Bring some classic retro gaming nostalgia to your space with this awesome Super Mario Bros. 1UP Mushroom LED Light Box! Inspired by one of the most recognizable power-ups in video game history, this 3D…
This gate restricts the movement of the joystick for fighting games on the Arcade1up cabinet. I have only tested this on my 1st generation Street Fighter II cabinet. After installation the joysticks felt tighter and more responsive.…
This is a new joystick actuator for an Arcade1up joystick. I tested it on a 1st generation Street Fighter II cabinet. This causes the spring to compress more than stock giving a stronger return to center.
You can print in one go (for single color printers or hand painters) or you can print in parts (for multicolored prints.) Tested and printed on flashforge AD5X multicolor printer, and assembled after print.
Models include stabilizers for the stock Lectric XP2, Lectric XP3, and also the base by itself which rests against the rack spool so you can model your own wheel stabilizer onto it as needed. Note - the base is for the full spool; I…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.9x150.9mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 1.2mm and the Actual…
I wanted to have a simple and protective case on my macropad, so I designed and made this with solidworks. This is for the original “Sweet 16” Macropad from 1up keyboards, modeled based off of using vogon_poetry's base . Settings I used:…
These are replacement plugs for the threaded add-on holes in the 1UP USA Quik Rack . These were generated using the Plug that hole OpenSCAD file and tested to fit. Printed in black ASA these have held up nicely in the sun all summer, or…
I broke the mirror of my Vorsa. needed a new clip. The front hole uses the included bolt - an m6 I think. The rear uses a m4 that I had laying around. 8mm long. Fits neat looks bad make it great
Paired with a quick quick release pin these make for an easy way to transport kids bikes or any bike with smaller wheels easily. Used with 4" long 5/16" quick release pin (~$2.40 on mcmaster part #98320A280) -…
Plug to fill in extra clearance(middle) slot on 1upUsa bike racks, so you only have to pull the release once to move it from fully up to fully down. Has a very tight press fit, I tapped mine in with a small rubber mallet
I made this to make my commute to work easier since I like to charge my battery at work. I used an ikea night stand leg to connect the two parts together (1.73"x1.43"x13.17"), but I've included the step file and a link to the onshape file…
