1 / 3
1up Wrench / Allen Wrench Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a a very tight fitting handle for a 1UP wrench or resized for any other allen wrench.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 45
- Makes
- 1
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Currently sized at 9.6mm wide on the flat to flat inner dimension.
I printed this at a very tight fit in PLA+ to be a permanent addition to my wrench handle. Given I was down to the last few wraps on the spool of filament, I printed it at a single wall at 10% gyroid for a 4g print. 0.28 layers and inner+outer brim for stability in vertical print orientation.
If you're concerned about fit, I'd print only 2-3 mm of the print and stop there. Use the partial print as a calibration piece and size up (or down) accordingly.