251 models
Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…
18650 battery holder 1x4 4S1P. Remixed from : https://www.thingiverse.com/thing:4700523
A simple holder for 1x4 sized coffee filters. Best printed with the longest edge facing the bed.
Extended version of @KYZ_446301's medium sized knife holder.
This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…
Made for the 1/4 in. Drive SAE & Metric High Visibility Socket Set, 21 Piece sold by Harbor Freight. If you’re looking for a socket wrench storage solution, check out…
Fixed for printing (original: https://printabrick.org/bricks/2431 ) Print instructions Category: Construction Toys
Disclaimer: Please ignore the bad print quality in both the photos. Bargain basement silk filament kept clogging/partially clogging the nozzle in first print, in second print the parts fan died causing warping, and ironing the surface…
Fits on Prusa Mini Nozzle: 0.4mm Material: PLA, anyone works Print: 0.2mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Gyroid (This is important in gridfinity pieces with magnet holes)
Fits a KSEIBI ratchet I got from amazon for pretty cheap. Stackable.
Gridfinity holder for the original GameBoy Advance (not the GBA SP)
I made this using a parametric customizer that has since gone MIA. I noticed nothing like it exists on the major model repositories, so I am uploading it here. It is a 1x4 lego compatible gear rack.
1x4 Gridfinity holder for a Nintendo New 3DS XL
This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for the popular 21x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That…
Sanding Band holders of 6 Large, 2 Medium, 6 Small sizes. I shortened it by 1 unit to allow more flexibility of vertical or horizontal orientation in the dremel box, and because medium sanding bands are rarely included in kits. Re-added…
There is an updated Version 2.1 of this model, which uses filament hinges. I recommend trying the filament hinge model over this version, since it is much easier to assemble. You can find the updated version at the link below:…
A holder for gridfinity system for theNintendo DS Lite
JST_SM 1x4 Skirt Connector (ADXL) JST SM 1x4 Skirt Connector for Vorons. Can be used as a connection for an accelerometer, for example an MPU 6500 with i2c connection. Recommended print settings: Material: ABS. layer height recommended:…
Second model! I had a request for a 3 tier gridfinity minifig display. Made a version with 1mm round over, and a version with a 3.5mm round over to match the OEM corner round over. there you go! Update: Added fusion test file for stud…
#gridfinity, #ZackFreedman
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Printed normal settings, I believe 15% infill
I've designed two mirrored versions of holders for the Milwaukee Fastback Utility Knife (48-22-1901). These holders do not include magnets or screw holes. The mirroring allows them to accommodate the knife with or without the belt clip…
This holder is designed to be easy to place and grab the ratchet. printed in pla at .2mm layer height at %15 infill. Should print fine at .3 and or lesser infill.
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. Stackable Insertbox 1x4 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert…
Molle containers with internal diameter of 41mm and 62mm. The larger container will accommodate an 11x46cm (18 inch) medical splint. Pojemniki molle ośrednicy wewnętrznej 41mm i 62mm. Większy pojemnik pomieści szynę medyczną 11x46cm (18…
Holes are centered for screwing 1x4 or 2x4 to 2xn boards (see 2x2 example render in pictures). Printed at 0.3mm layer height with a 0.6mm nozzle in Overture gray blue PLA.
I wanted a smaller gridfinity bin to store the Xiaomi & Wiha precision screwdriver set. This one only uses 1x4 regular gridfinity slots with a 3u height. The slot for the driver should be able to hold the driver with a bit in it. The…
A 1X4X2U bin made to hold 2 Olfa Craft Knives with thumb slot for easy removal of the craft knife
This is a LEGO Plate 1X4 (3 plates = 1 brick). The plate is similar to the plate 371001, but it does not need to be white.
A custom fit 1x4 storage bin to hold a single Milwaukee 2105 Aluminum 100-Lumen Pen Light with Clip in ZackFreedman' s Gridfinity organization system. I got tired of storing this in a regular 1x4 bin for the most part so I thought I'd try…
Simple hinge's with printable pin and pin lock. Ps A1 chamber is made from OG box. Later on will try to add on ams lit
Lego Window 1x4x3 casement (60608) for Lego Window 60594 it's not LEGO !
Old hanging coffee filter holder need to be replaced. I need one that can hang or can stand on the table. I decided to design my own. I have accepted the print time which is more than 8 hours, to get a sturdy model, otherwise I need to…
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
Gridfinity 1x4 Divided Hex Bin
Simple standing holder for size 1x4 (no4) coffee filters. No supports required, print standing up. Mine is printed using PETG with 8% infill.
1x4 Gridfinity dupont cable storage 75-120-160mm
24mm diameter (1x1square) for pawns width 0.8mm 24mm diameter (1x1square) for pawns width 1.6mm 24mm diameter (1x1square) for pawns width 2mm 24mm diameter (1x1square) for pawns width 2.4mm 48mm diameter (2x2square) for pawns width 0.8mm…
Bearings should press fit but a small amount of super glue can be added to posts before adding the bearings if tolerances are off. Printed at 0.3mm layer height with a 0.6mm nozzle in Overture gray blue PLA.
Gridfinity 1X4X6 filed box modified to hold long cotton swabs. Part of a set of several items I modified to better organizer my firearms cleaning supplies.
Added a small chamfered recess at one end to ease getting the torch out of the box. Just press down so the torch pops u.
A quick model for gridfinity 5x1 tray of Fnirsi HS-01 soldering Iron. Gridfinity hight is 4u. there are two versions available: with magnets holes (6x2mm) no magnets
Holds Icon mini ratchet and bit set 35pc
This is an end cap designed for heavy duty (2.5mm thick steel) 41x41 strut. It's designed to be a tight fit, you might need to tap it in with a hammer. I recommend printing it with lots of walls, at least 6, infill percentage is less…
Stackable Insertbox 1x4 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-28 v2.3 initial public…
Remix of Some Guy 384763’s plier rack design Smaller gridfinity versions of the horizontal plier holder: Available in 1×4 (2 pliers) and 2×4 (4 pliers) formats. Slot width: 17.75 mm (1×4) and 18.375 mm (2×4) . Still fits into the shorter…
Holder for 1x4 coffee filters. There's already a bunch of other holders out there, but i didn't find any in this orientation. I find it easier to grab the filters when oriented like this. Two versions, one with braces on the side and one…
This is a gridfinity 1x1x4 block with holes from 12mm to 43mm. Measure what you want to hold and add 2mm to it. Then you will have a custom holder for what ever you want. As long as you have a caliper you have the prefect file for what…
Quick sketch for a Gridfinity 1x4 for the OG Nintendo DS Fat/Phat NTR-001. Printed in 0.2mm layer hight
I Introduce to you the Microsoft Surface Gridfinity pen case. The case fits snugly around you're pen so it doesn't wobble around. I'ts secured in place with 2 6x2 magnets placed where the magnets inside the pen are. So the pen doesn't…
A 1x4x6 gridfinity for a wera 1013 bit holder and 14 bits. Bits can be a little tricky to remove as there is not all that muck space in the 1x4 bins. I printed my model mirrored.
Remix of Sweet1227's Gridfinity Pinecil iron holder made smaller (1x4 instead of 1x5) with heat set insert storage. No outer lip or solder pocket. Heat set insert copper tips rearranged and labeled. Fits iron with short heating element.…
I love Gridfinity but needed something to work with the Rubbermaid FastTrack Panels I already had mounted. I borrowed the overall aesthetic and structure from Ashleyi100 and the FastTrack clips from GarageTimeWithDavid.
Lagerdummy für Vespa V50-125 KULU 17,1x46,9x14 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. Stackable Insertbox 1x4 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible…
I've designed a simple macropad using the Adafruit Neokey 1x4 PCB and a Seeed Studio Xiao microcontroller. Since all Seeed Studio Xiao microcontrollers as well as all Adafruit's QT py microcontrollers share the same dimensions, any of…
Stackable Insertbox 1x3 units in footprint, 1/2 height, 1x4 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
1x1x4U Gridfinity Lite Bin for holding Chapstick Quick Print - No Magnet or Screw Holes Printed in 34 minutes! Holds 4 standard size chapstick tubes Printed on Ankermake M5 with PLA+ with a 0.4mm nozzle at Fast speed Print Settings: 0.3mm…
Stackable Insertbox 2x2 units in footprint, 1/2 height, 1x4 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-21 v2.2…
Stackable Insertbox 1x3 units in footprint, 1/3 height, 1x4 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
A simple gridfinity block that stores up to 5 Prusa spatulas.
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
An ergonomic X-Acto blade holder built on the Gridfinity system. The goal of this design is to make accessing and storing the X-acto knife as easy as possible while ensuring the danger end is secure. Required Materials: - 6mmx2mm Magnets…
Fits HD-74500 series drivers made by Husky.
This is a 1x1x40 with 2 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
Stackable Insertbox 1x4 units in footprint, 1/2 height, 1x5 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-29 v2.3…
Lagerdummy für Vespa V50-125 LIMA 25,1x46,9x12 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
Sortimentsbokse, 4 stk. Art. 71-815 https://www.biltema.dk/varktoj/varkstedsudstyr/sortimentskasser/sortimentsbokse-4-stk--2000041612
Holds 20x or 16x Paint Marker holder respectively on a Gridfinity base. Using Paint Skills Paint Markers from Sam's Club 18x pack. 15.8mm Slots These Markers should be the same size: https://a.co/d/15B5c96 These are the magnets for the…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. Stackable Insertbox 1x4 units in footprint, 1/2 height, 1x2 partition grid two of them stacked are as high as a full…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link above Changelog 2022-07-14…
Gridfinity holder 1x4 for Xiaomi/Redmi PB200LZM ( 20000mAh) powerbank Thanks for your likes ;-)
needed some bins specific for tools to stack on a 4x4 setup… so here is a 3x4 + 1x4 set of bins to stack. used https://gridfinitygenerator.com/ to create these.
ESP32 C3 “Supermini” (USB-C) Gridfinity Storage Bin This 1x1x4 Gridfinity bin can hold up to 8 of these little boards snugly and securely, to protect the delicate switches and other components on the PCB. The base uses GridfinityRefined,…
This is a 1x1x40 with 4 subdevisions I made for Alexandre Chappel's 55mm storage grid system ModuBOX. The Collet holder is based on the 40mm stackable model and can be used on top of a 1x1 sized 40mm box. This model is designed to contain…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
12-48V 4wire PWM Fan Temperature Speed Controller Board Case. 1X4L FAN-1248 CONF V2-E Uses four M3x16 Socket Head Screws and four M3 nuts. Activation levers for “-, +, OK” buttons. Check for fit of case front connector holes as PCB…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link above Changelog 2022-08-29…
Lagerdummy für VespaV50 LIMA 20,1x46,9x14 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego 45°…
Customized version of http://www.thingiverse.com/thing:16627 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: idler = 1 no_of_nuts = 1 pulley_b_dia = 20…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
ESP32-C6 “Supermini” (USB-C) Gridfinity Storage Bin NOTE : This is for the C6 Supermini board specifically. The bin for the more common C3 “Supermini” board can be found here . This 1x1x4 Gridfinity bin can hold up to 8 of these little…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link above Changelog 2022-08-28…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
We have a great fence, so great that no existing light clips seem to work for us. I printed this out of PETG at 20% infill, and they work great! Quick and easy to print, no supports or anything needed. Pick some festive or Halloween…
A simple gridfinity holder for your 150mm rulers. 10-15% infill .20 layer height Update 1/10/24: Added STL file, cleaned up 3MF Recommended magnets: https://amzn.to/48RlExG
Uses 2 M4x8 bolts with T-nuts.
Stackable Insertbox 2x2 units in footprint, 1/3 height, 1x4 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-25 v2.3…
Gridfinity-compatible organizer for storing up to 6 scalpel blades. Module size: 1x4x3 Max blade size: 8.5x40mm Press the top or bottom edge to release the scalpel holder.
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
COR-1X4 Corsair Rework for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
A 1x4 Gridfinity bin for you Ratcheting PB Swiss screwdriver
Remixed original model into the folowing configurations: 2 x 4 1 x 4 1 x 2
![[ALCH] 1x1x40 2 subdevisions ModuBOX](https://media.printables.com/media/prints/533851/images/4308035_923a67a9-f9db-4091-9022-416738440c4f/img_0497.jpeg)
![[ALCH] 1x1x40 4 subdevisions ModuBOX](https://media.printables.com/media/prints/533850/images/4308033_73ffa9c5-c6e8-42e9-b29a-f8ca1baa1b67/img_0498.jpeg)
