JST_SM 1x4 Skirt Connector (ADXL)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
JST SM 1x4 Skirt Connector for accelerometer on Voron.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 177
- Makes
- 3
- Views
- 1,172
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
JST_SM 1x4 Skirt Connector (ADXL)
JST SM 1x4 Skirt Connector for Vorons.
Can be used as a connection for an accelerometer, for example an MPU 6500 with i2c connection.

Recommended print settings:
Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.
Printable without support
Disclaimer:
This is originally based on this mod for a Microfit 2x3 connector.
which has been modified on this mod, to not need supports and to fit a bit tighter on the connector.
I replaced the Microfit 2x3 connector for a JST_SM connector and made the design of this mod fit the jst connector.


→ Please follow more designs soon !!! ←