JST_SM 1x4 Skirt Connector (ADXL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JST SM 1x4 Skirt Connector for accelerometer on Voron.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 177
- Wydruki
- 3
- Wyświetlenia
- 1172
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
JST_SM 1x4 Skirt Connector (ADXL)
JST SM 1x4 Skirt Connector for Vorons.
Can be used as a connection for an accelerometer, for example an MPU 6500 with i2c connection.

Recommended print settings:
Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.
Printable without support
Disclaimer:
This is originally based on this mod for a Microfit 2x3 connector.
which has been modified on this mod, to not need supports and to fit a bit tighter on the connector.
I replaced the Microfit 2x3 connector for a JST_SM connector and made the design of this mod fit the jst connector.


→ Please follow more designs soon !!! ←