P
PrintablesGildef
18650 1x6 6S1P Li-ion battery holder
18650 battery holder in 1x6 configuration. Remix from : https://www.thingiverse.com/thing:4700523
- Downloads
- 505
- Likes
- 29
- Rating
- 4
Search results: 1x6
Counting matching models…
P
PrintablesKLAPI
storage boxes with sliding lid 21X60X40
remixed internal dim's H=21mm L=60mm W=40mm
- Downloads
- 481
- Likes
- 94
- Rating
- 5
P
Printablestheflow.fr
Gridfinity simple bin 1x1x6
here's a simmple gridfinity bin
- Downloads
- 401
- Likes
- 23
- Rating
- 5
P
Printables3DSpenny
Gluestick Holder 30mm - Gridfinity 1x1x6
A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…
- Downloads
- 350
- Likes
- 43
- Rating
- 4.71
P
Printablesidenny1
Gridfinity Needle File holder 1x1x6 (added step files)
I adjusted the size of the holes to 4.7 mm to fit my handles. Added step files for easy changes.
- Downloads
- 325
- Likes
- 49
- Rating
- 4.56
P
Printablesmanmac
Gridfinity Mitutoyo Caliper holder 1x6x8
Compatible with Zack Freedman's Gridfinity System: ZackFreedman | 3D model uploads | Thangs Created using https://github.com/kennetek/gridfinity-rebuilt-openscad Gridfinity size 1x6x8 Printed with standard settings.
- Downloads
- 313
- Likes
- 33
- Rating
- 0
P
PrintablesHuerta
Gridfinity 6 inch caliper 1x6 w/ battery design
sGridfinity storage for a harbor freight 6-inch digital caliper. Includes 4 available spaces for replacement batteries. UPDATE (2023.1.14): V2 I have made updates to the design based on some feedback. This new design allows you: Store the…
- Downloads
- 312
- Likes
- 28
- Rating
- 4.44
P
Printablesnickd
Gridfinity Funnel 1x1x6
Remixed to sit upside-down in a single gridfinity 1x1 square.
- Downloads
- 311
- Likes
- 53
- Rating
- 4.94
P
PrintablesSomnus
32700 LiFePo4 Battery Box 151x65x94 mm 12V for UPS
This battery box was designed to replace the sealed lead acid battery in my APC UPS. The runtime is multiplied with this battery. If it is possible, you need to set the float charging voltage of the UPS to maximum 13,6V to not stress the…
- Downloads
- 210
- Likes
- 32
- Rating
- 5
P
Printablessmoura
LEGO - Compatible Brick 1x6
Brick | Block 1 x 6 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or…
- Downloads
- 186
- Likes
- 7
- Rating
- 0
P
PrintablesGildef
20700 1x6 6S1P Li-ion battery holder
1x6 cell holder for 20700 Li-ion battery. 20700 are mainly used on Dyson products.
- Downloads
- 172
- Likes
- 14
- Rating
- 0
P
Printablesgrunty
Gridfinity 1x6x4 HF 1/2" Impact Extension Trays
The product: https://www.harborfreight.com/12-in-drive-impact-socket-extension-set-4-piece-67972.html Fits perfectly, a little bit of wiggle room, both trays are stack-able. Includes cutouts to grab them. Not sure about fitment with other…
- Downloads
- 162
- Likes
- 14
- Rating
- 0
P
PrintablesDarkBrave
Ender 3 Snippers and Scraper Gridfinity Module (1x1x6)
I made this little 1x1 Gridfinity module to hold the scraper and snippers that come with most Ender 3s, in my case the Ender 3 V2 Neo, but I'm sure it would work with other Ender models. I used the dimensions from petkata's tool holder ,…
- Downloads
- 149
- Likes
- 13
- Rating
- 5
P
Printablesmauriko
Brick with Inside Bow 1x6x2
I am always short of some bricks when creating LEGO MOCs (My Own Creation), so I am using FreeCAD and my printer to create temporary placeholders when prototyping. This model is a brick compatible with LEGO's brick no. 15254 - Brick w.…
- Downloads
- 148
- Likes
- 13
- Rating
- 0
P
Printablescogspace
Gridfinity 1x6 GemRed 82305 Digital Angle Finder Holder
This is a 1x6 Gridfinity compatible holder for the GemRed 82305 digital angle finder. It is designed to fit inside the top drawer of an IKEA ALEX drawer unit. I have also included a model of a bounding volume of the tool itself, which was…
- Downloads
- 141
- Likes
- 13
- Rating
- 5
P
PrintablesSandro
Lego piece 43888 1x1x6 pillar
This is lego piece 43888, also known as the 1x1x6 pillar I found it online as a .ipt file and converted it to .stl with fusion360 It is used in a few sets, I am using it for the Lego Saturn V launch escape system I suggest you print it on…
- Downloads
- 128
- Likes
- 11
- Rating
- 0
P
PrintablesDavid C
Gridfinity Magnets+ Dremel Sanding & Grinding Guide 1p2x1x6
Added 4 magnet holes to full socket. Magnet holes have square bridges for better bridging and no droopy rings. Shortened the extra socket from original model so that it can fit in the modified toolbox upper , and also saves on filament.…
- Downloads
- 116
- Likes
- 16
- Rating
- 5
P
PrintablesTica
Gridfinity key chain holder 1x1x6 & 2x2x6
A key holder box for gridfinity Variants: 1x1x6 2x2x6
- Downloads
- 104
- Likes
- 7
- Rating
- 0
P
PrintablesChristoph1985
Lagerdummy für Vespa PX80-200 KULU 25,1x61,9x12
Lagerdummy für Vespa PX80-200 KULU 25,1x61,9x12 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
- Downloads
- 95
- Likes
- 5
- Rating
- 0
P
PrintablesPestregen
Gridfinity divided labeled stackable bin 3x1x6 x6
A divided, labeled and stackable bin, 3x1, 6 units high, with 6 compartments. Ideal for little screws, or other tiny stuff.
- Downloads
- 95
- Likes
- 11
- Rating
- 0
P
Printablessnillor200
Gridfinity Starbond 2X1X6 X2 Container Compartment
Gridfinity compatible storage for Starbond 2oz. Cyanoacrylate glues and Bob Smith Industries 2 oz. cyanoacrylate accellerator. There is some bridging on the base where the weight cavities are located. This was no issue on my Ender 3 Pro.…
- Downloads
- 88
- Likes
- 18
- Rating
- 5
P
PrintablesSuperNitram
gridfinity divider bin 3x1x6 or x3 6 divisions
gridfinity divider bin 3x1x6U or 3x1x3U 6 divisions perfect for electronical component for exemple
- Downloads
- 82
- Likes
- 10
- Rating
- 4
P
PrintablesSpokelax
Gridfinity Bin Labels: Hex Nuts & Washers for 1x1x6_D2_L12_S10
Pretty much nothing to explain here. — Custom size — Fusion files are available in zip. ↪ “Small text” version has a height of 3.5 (useful for decimals) while “Big text” has 4.5. Edit text, then extrude 0.4mm and you're ready to print. —…
- Downloads
- 81
- Likes
- 11
- Rating
- 0
P
PrintablesGlaDOS
Gridfinity Bin - Caliper Holders/Bin 1x6
Gridfinity storage bin for digital calipers. Designed specifically for the Vinca DCLA-0605 calipers, but should fit many different digital calipers. Has cutouts for storing 4 extra LR44 batteries. Fits in an Ikea Alex Drawer Gridfinity…
- Downloads
- 80
- Likes
- 8
- Rating
- 5
P
PrintablesFlyBy Tom
Bosch/Sortimo i-Boxx 1x6 Label Collar
Label Collars for the Bosch/Sortimo 1x6 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
- Downloads
- 80
- Likes
- 21
- Rating
- 0
P
PrintablesFred Maranhao
Gridfinity Bed Sheet Holder 1x6
Holds up to four 235x235 flexible bed sheets, into a 1x6 Gridfinity
- Downloads
- 75
- Likes
- 13
- Rating
- 5
P
PrintablesVanwilla
Ender 3 Flush Cutters/Snippers 1x1x6 Gridfinity bin
Small 1x1x6 Gridfinity bin designed to hold the Ender 3/5 Flush Cutters/Snippers point down for safety. Uses about 24g of filament when printed at 10% infill. Fusion filed uploaded in case anyone needs to modify!
- Downloads
- 74
- Likes
- 10
- Rating
- 0
P
PrintablesDrew Fleury
Vertical Xacto knife + blades + Brass/Metal brush + ruler holder Gridfinity bin 1x1x6
Was not happy with the offering of vertical gridfinity bins that would hold an Xacto-like knife along with blades in an attractive but safe way, therefore I designed my own. I noticed that I did not need to store more than 10 extra blades…
- Downloads
- 70
- Likes
- 10
- Rating
- 5
P
PrintablesMT
Gridfinity 2x1x6 Raspberry Pi Zero organizer with lid
This 2x1x6 gridfinity bin can hold max 5 pi zero without headers. And max 2 pi Zero with headers. Thanks Joey03M gave the idea of holding Raspberry Pi zero in the 2x1 bins, and bulbasaur0 for making the scad file to allow me to quickly…
- Downloads
- 65
- Likes
- 10
- Rating
- 3
P
PrintablesErnie
Mansions of Madness Card Tray or for any other 41x63mm cards
Made MOM2 but could be used for any game with 41x63mm cards.
- Downloads
- 65
- Likes
- 9
- Rating
- 0
P
PrintablesSpeCter
JST-SM 1x6 Skirt Connector (ADXL)
I wanted a 6-pin JST-SM version of the 4-pin version so I modified the original to fit my adxl345. Recommended print settings: Material: ABS. layer height recommended: 0.2mm. Extrusion width recommended: Forced 0.4mm. Fill Type: Grid,…
- Downloads
- 65
- Likes
- 17
- Rating
- 0
P
PrintablesTomivol
Scharnier 121x65x16(7) L-B-H
Stabiles Scharnier mit den Abmessungen 121x65x16(7) aus Pla mit einer Achse aus M5x60 Inbusschraube PLA oder PETG 100% Infill
- Downloads
- 64
- Likes
- 15
- Rating
- 0
P
Printablesmozartlovescats
Gridfinity Mitutoyo Caliper 530-312 Holder 1x6
It's not stackable, but very easy to pick up the caliper. Dimension is 1x6
- Downloads
- 63
- Likes
- 8
- Rating
- 5
P
PrintablesDruckmeister
Leiterfuss Aluprofiel 21x68mm
Leiterfuss Aluprofiel 21x68mm zum draufhauen !
- Downloads
- 60
- Likes
- 6
- Rating
- 0
P
PrintablesDaemonium
Organizador para cartas de Descent + Nerekhall tamaño 41x63 enfundadas
Caja para las cartas 41x63 de Descent + Nerekhall, caben perfectamente enfundadas En los huecos (de mas pequeño a mas grande) las he ordenado así: 1] Cartas de reliquia 2] Cartas de búsqueda 3] Cartas de estado 4] Cartas de mercado nivel…
- Downloads
- 57
- Likes
- 0
- Rating
- 5
P
PrintablesTomie M
Gridfinity Craftright Precision Craft Knife Holder 1x1x6
Has a small round over on the edges to help the knife easily slide in. The model fits within a Gridfinity 1x1 and is 6U high.
- Downloads
- 52
- Likes
- 9
- Rating
- 4
P
PrintablesNiko
Caliper Holder Gridfinity 1x6U
Gridfinity Caliper and tweezer holder
- Downloads
- 52
- Likes
- 6
- Rating
- 5
P
PrintablesLongy
Gridfinity - 1x1x6 Wuben C3 Flashlight Holder
This is a gridfinity compatible holder for the Wuben C3 Flashlight. In case you are wondering whether this model might fit your flashlight as well: The hole for the flashlight has a diameter of 27mm. The small cut out rectangle is 6x11mm…
- Downloads
- 46
- Likes
- 5
- Rating
- 0
P
PrintablesGolden Picture Studios™
Lego compatible 1x6 brick
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brick corresponds to the LEGO brick…
- Downloads
- 44
- Likes
- 7
- Rating
- 0
P
Printablesjehne
frame for keyboard switches 11x6 #freecad
Editable with FreeCAD - free download: https://www.freecad.org/ (file .FCStd)
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
PrintablesGolden Picture Studios™
Lego compatible 45° 1x6 Slope Inverted 1x4 Cutout 52501
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego 45°…
- Downloads
- 42
- Likes
- 6
- Rating
- 0
P
Printableshubert felix
Eraser pro tool kit | tipp-ex mini + staedler rasoplast rubber holder | 1X1X6 gridfinity
Eraser tool pro kit! Display side by side your favorite tipp ex and rubber. A bit loose for the tipp ex due to the akward design but very functionnal!
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesImstubby
E-Torx Shallow Socket E4-E24 Tray - Gridfinity Compatible 1x6
E-Torx Shallow Socket E4-E24 Tray - Gridfinity Compatible 1x6 E4,E5,E6,E7,E8,E10,E11,E12,E14,E16,E18,E20,E24
- Downloads
- 41
- Likes
- 4
- Rating
- 0
P
PrintablesBodo
1x4 units, half height, 1x6 grid Stackable Insertbox
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesIdea2Item
Gridfinity Mitutoyo analog Caliper holder + ruler + radius gauges 1x6x8
Just a nice holder for your Mitutoyo analog caliper. I saw unused space in the original model so I remixed and added cutouts for my 15cm ruler and 2 radius gauges. A really nice set to have near you when you're 3D drawing around an…
- Downloads
- 36
- Likes
- 8
- Rating
- 0
P
PrintablesSegan Designs
Gridfinity CR Battery Holders 1x1x3 and 1x1x6 Stackable
I designed these to fit well inside @unrepentantgeek 's Modern Gridfinity Case . Two sizes are available for each battery type, 3u if you want to stack two together and 6u if you want to use full height in the default case. The inset text…
- Downloads
- 33
- Likes
- 5
- Rating
- 5
P
PrintablesKristian Myklebust
12V 7Ah-9Ah 151x65x93mm battery cover for cigarette lighter receptacle
This is a cover to hold a cigarette lighter receptacle, a switch and a display for battery charge status from aliexpress.com if you have a 12V usb chager and an old UPS battery laying around you can use this to make a handy little…
- Downloads
- 33
- Likes
- 10
- Rating
- 0
P
PrintablesNathan_Drone
Brick 1x6 with 1 hole, perfect for a keychain
Lego brick 1x6 with 1 hole, perfect for making a keychain. You can add your name to the side to add some personality. The fit with original lego is not as good as the real thing, however, you can hold it upsidedown with another brick…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesRobbieDIV
Wood Board Substitute (Building) 1X1X6
Use as a substitute piece to your small woodworking projects,
- Downloads
- 28
- Likes
- 4
- Rating
- 0
P
PrintablesWalterInBlack
Caliper holder gridfinity 1x6
A holder for my calipers to be held at an angle. This creates a nice display and lowers the total height of holder with calipers to about 72 mm to fit in my drawer.
- Downloads
- 28
- Likes
- 5
- Rating
- 0
P
Printablesscat25
Gridfinity 2x1x6 3-12 mm drill bit holder
I bought a set of reamers that came in a bag. So naturally i wanted to store them properly and looked for a gridfinity holder. I couldn't find a vertical holder for a set of 3-12 mm bits, so i made my own. Each hole is labeled, I colored…
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
Printablesaneel
Jewelry Saw Blade Container - Gridfinity 4x1x6
Jewelry saw blades are tiny and hard to tell apart, so it's important to keep them organized. After trying various tray solutions and having blades shift around, a friend suggested a cylinder. This container has 12 usable compartments and…
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
Printables3DNoobMaker
LEGO 6311889 WING 1X6X1 2/3, W/ 4.85 HOLE
Pièce LEGO TECHNIC 6311889 WING 1X6X1 2/3, W/ 4.85 HOLE
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesKrusen2015
Gridfinity 2x1x6 CAT 40 Tool Tag Slots
Modified 2x1x6 Gridfinity Divider Bin to Hold CAT 40 Tool Tags. Might be a little tall for your application as the tags don't go very far into the bin.
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
Printablesmonetary-episode
Gridfinity 3x1x6 Bin
This is a 3x1x6 Gridfinity bin. It has magnet holes on the bottom, (Standard Gridfinity 6x2mm round) and is a fast and easy print. If you like gridfinity and want more, check out my other STL's.
- Downloads
- 22
- Likes
- 6
- Rating
- 5
P
Printablesnightrain912
Gridfinity Wire Spool Set 30–36 AWG (3 pcs, 1x1x6)
For 36 AWG wire — approximately 75 meters per spool (also suitable for thicker wires (30–35 AWG) with proportionally reduced length) Each spool consists of two parts that press-fit together without glue. There is no built-in alignment…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesS197 Designs
Gridfinity 1x6 Quinn Metric Nut Extractor Holder
Holder for Quinn Nut Extractor May work for SAE but not sure
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
Printableswmk75
4 rows of 1x6pcs paint pot holder
This is a tray to hold 4 rows of 1x6pcs paint pots from Hobby Lobby SKU: 1237494 Outer dimensions are 239mm x 124mm x 42mm. 2mm thickness.
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesFSOCIETY
Revoltage Beam Holder + Charger 1x1x6U Gridfinity
A Revoltage Beam Holder + Charger 1x1x6U for Gridfinity. If you want to use it to charge your pod you need a 90 degree USB-C Adapter you can put inside the holder.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesmicke_swe
Snapmaker U1 1x6 GridFinity back storage
Snapmaker U1 gridfinity storage, make it possible to use the back inside the printer to store up to 1x6 gridfinity boxes. Perfect for hotends and other spare parts for Snapmaker U1.
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesIn3Dca
In3D FreeGrid 1x6 Grid
1x6 Base grid. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our FreeGrid page .
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesLucas G.
Gridfinity bin 1x1x6 for Festool Domino cutters D5 & D8
I am preparing myself to rebuild storage solution in my garage to gridfinity. Original Festool boxes are rather bulky just for one bit so I designed bin that fits four of them. Inside holes can be sanded a little bit to avoid scratching…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablesinsanecracker04
Gridfinity Pittsburgh Deep metric 3/8 socket set (1x6 4u)
a quick gridfinity socket holder for the pittsburgh deep metric 3/8 10pc set (part no 67867 from harbor freight) ( https://www.harborfreight.com/38-in-drive-metric-high-visibility-deep-socket-set-10-piece-67867.html ) blank was generated…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesMiguel RL
Hexagonal bit holder (1x6)
This a simple hexagonal bit holder. Not in tolerance so it will fit a little loose.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesVontragg
Omicron-Beta-Lima Walkway 61x61 - WH40k
One of the less known works of the Cults of Mars decorating the "posh" residences of the upper class of the imperium. Standard walkway WH40k terrain. These can be used with the support pillars in the OBL collection or those compatible…
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
Printables3DMadLab
Simple Box 61x61x10 inside
A simple box design for sticker, ... The inside is 61mm x 61 mm x 10 mm
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesD J
Gridfinity 1x6x4 Dual GemRed 82305 Digital Angle Finder Holder with CR2032 Battery Slots
Holds TWO angle finders, plus batteries I used a 1x6x4 unit high filled box and then subtracted the 3d model of of the angle finder by cogspace. I added a 0.01" outline around the projected shape. Then added a central storage recess for…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesEnginerd
1x6 Team Integy Allen Driver holder for DDD Wall Control
Created for this set: Team Integy RC Allen Hex Wrench Set Uses: DDD Wall Control 1x 2x1 L Bracket Flat Right 1x 2x1 L Bracket Flat Left Used 3 wall loops and 20% infill. I used PLA.
- Downloads
- 6
- Likes
- 3
- Rating
- 0
P
Printables76cb
LTT Screw Driver 1x6 - magnet holes removed
LTT Screw Driver 1x6 - magnet holes removed
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesKeldor
Gridfinity 1x6x6cm
A gridfinity bin with the size of 1x6 and a bin hight of 6cm. The bar structure makes it durable and a bit less material consuming. Hope you like it. The base is created with the gridfinity fusion 360 plugin from…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesBratensoße
1x1x6u Gridfinity Bin with slidable lid
Storing small items but being able to block one half while pouring out.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjoeking
Additional Bistable-Spring-Lid Clam Cases 1x6 1x7 2x6
Variations Clam Case 1x6 (Front Orientation) Clam Case 1x7 (Front Orientation) Clam Case 2x6 (Front Orientation) Clam Case 2x6 (Side Orientation) Both tackle boxes have rounded corners versions to reduce sharp edges but if you would like…
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
Printableseyes539
Gridfinity 2x1x6u Stackable Bambu Wiper and Cutter organizer Remix
Remix of @TomER_667026's cutter and wiper storage box modified to be 6u and stackable to fit in the Pred Storage Box
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesSmaythersCorp
Gridfinity Baseplate for Milwaukee Benchtop 501x673 mm
It is a baseplate. A big one that I printed in sections on my Creality K1. It comes in parts to be able to then snap into place. All told it is 501x673 mm (19.75x26.5 inches). I use mine in the top two drawers in my Milwaukee toolbench.…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printables
Gridfinity 2x1x6u Stackable Bambu Wiper and Cutter organizer Remix
Remix of @TomER_667026's cutter and wiper storage box modified to be 6u and stackable to fit in the Pred Storage Box
P
Printables
1x6 Holder for 18650 Model Batteries
I designed this project to be able to use lithium batteries together. Print this project with ABS filament because the lithium batteries can melt the holder as they heat up!
P
Printables
Jewelry Saw Blade Container - Gridfinity 4x1x6
Jewelry saw blades are tiny and hard to tell apart, so it's important to keep them organized. After trying various tray solutions and having blades shift around, a friend suggested a cylinder. This container has 12 usable compartments and…
P
Printables
Snapmaker U1 1x6 GridFinity back storage
Snapmaker U1 gridfinity storage, make it possible to use the back inside the printer to store up to 1x6 gridfinity boxes. Perfect for hotends and other spare parts for Snapmaker U1.
P
Printables
1x6 Team Integy Allen Driver holder for DDD Wall Control
Created for this set: Team Integy RC Allen Hex Wrench Set Uses: DDD Wall Control 1x 2x1 L Bracket Flat Right 1x 2x1 L Bracket Flat Left Used 3 wall loops and 20% infill. I used PLA.
P
Printables
Brick with Inside Bow 1x6x2
I am always short of some bricks when creating LEGO MOCs (My Own Creation), so I am using FreeCAD and my printer to create temporary placeholders when prototyping. This model is a brick compatible with LEGO's brick no. 15254 - Brick w.…
P
Printables
Gridfinity Flashlight Holder 1x1x6
Gridfinity Model for flashlights with a 26,5mm diameter hole Size 1x1x6
P
Printables
Gridfinity 1x1x6 vase mode box only 6g
Inspired by other gridfinity boxes I've made mine 1x1 box that can be printed with only 6g of filament My print settings are: vase mode, 3 bottom layers, .28 first layer height, .2 other layers height, 0.6mm wall thickness I was printing…
P
Printables
Gridfinity 1x1x6 pin holder for miniature painting
The holes will likely need to be reamed, but they're specced to 1.5mm and 2.5mm. This works with brass rods you can get for pinning, and the 2.5 is about right for most round toothpicks. STEP files are included so you can edit the hole…
P
Printables
.425 Westley Richards Magnum/11x67mmRB Cartidge
Model of the .425 Westley Richards Magnum cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you…
P
Printables
Ikea Skadis Top Shelf Bracket - 1x6 Board
The original model was designed for a smaller piece of wood (35cm x 8cm x 1cm) and it was a little too narrow for me. The original was posted on MakerWorld but I couldn't find it here. I wanted a bigger shelf for the top of my Skadis…
P
Printables
shelf bracket for 1x6
a shelf bracket for a 1x6, will change in the future to change position of the screw holes
P
Printables
1x6 Holder for 18650 Model Batteries
I designed this project to be able to use lithium batteries together. Print this project with ABS filament because the lithium batteries can melt the holder as they heat up!
P
Printables
Gridfinity 1x1x6 Parametric Bin – Free STL (Magnet Pockets)
Free high-precision 1x1x6 Gridfinity bin STL A clean and precise 1x1x6 Gridfinity bin designed with real-world tolerances and usability in mind. Key features: Base tolerance: 0.25 mm → actual size 41.5 × 41.5 mm for perfect stacking fit…
P
Printables
Gridfinity 1x1x6 AAA Battery
This is a basic AAA battery holder for Gridfinity. It is 1×1×6 Gridfinity units. The batteries fit slightly loose to accommodate any battery that is thicker than average.
P
Printables
Gridfinity v5 - 2x1x6u Vase Label Bin
I edited the original design so that the the label feature is on the long side for the 2x1x6u bin.
P
Printables
Smaller Gridfinity Pen/Pencil Holder (1x1x6)
Smaller version of the pen/pencil holder featured in the original Gridfinity release. It does store fewer utensils, but also takes a shorter amount of time to print and is smaller.
P
Printables
Wider Gridfinity Deburring Tool Holder (1x1x6)
I made this little 1x1 Gridfinity module to hold this deburring tool I found on Amazon and its ten extra blades. I based the module itself of the parametric Gridfinity modules Zack Freedman provided on his initial Gridfinity video . I…
P
Printables
Gridfinity 35MM Double Jar Holder 2x1x6
Simple 35mm double jar holder for Gridfinity .20 layer height 15% infill Recommended magnets: https://amzn.to/48RlExG
P
Printables
No hole 1x6 and 1x7
Removed the holes for the magnets to print better with larger nozzles and layer heights. Also made a longer version to fit some of my larger utensils. Models are 1x6 and 1x7 in size. This is actually modeled from scratch (minus the…
P
Printables
Gridfinity Bin 1x6x6 without magnet holes
Here are some bins for the Gridfinity storage system which I didn't found anywhere. So I designed them by myself.