31 models
I would recommend at least 0.2mm layer height. Add pause at 3.4mm layer so you can insert the key and print the bridges over the key. MAKE SURE that you key is not bent otherwise the bridges can fail/deform.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
4-11-22 updated model with stl parts
I needed a tool to loosen and fasten the oil filler cap on my 2005 BMW R1200RT. Since the RT is covered in plastics, the model I treid, made by @JahnRoux did not fit, so I remixed it in a way that it would fit. It probably will fit the…
Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…
PC case Corsair carbide 200R power button replacement. These original buttons often breaks after 4 years of usage.
This project is a slide projector for the Godox round head of the AD200 flash. I print with PETG for decent strength and temperature resistance. PLA would probably be problematic. I printed it with full supports, 0.2 mm quality setting on…
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters. Print bouth parts and glue 2-4 magnets, round…
Download ? Please Like Thx BMW R1200RT The bike is filed in whit epoxy
A simple converter to put a 120mm fan into the 5.25 drive bays of a Corsair Carbide 200R PC case. IMPORTANT NOTE FOR PRINTING: the .stl files has no mesh. You need to create the mesh in your slicer. To do this, in your slicer: - Set the…
This is a remix design for my BMW R1200RT 12mm bar. Printed with eSun ABS+ You will need : 4 screw M3 x 25mm 2 screw M4 x 40mm 1 screw M4 X 30mm 2 locknuts M4
This is the Base and spring for the shell of the above mentioned robotic mowers, since they are all the same with a different shell. The original Rubber Part gets brittle and rusty over time. The replacment part is 8€ *4 plus shipping,…
After some 8 years of use the front tires on my Flymo 1200r finally failed. The rubberised compound had perished and it was starting to break-up. One problem I have always had is that the early morning dew makes the grass cuttings stick…
I ordered the Corsair Carbide 200R Case unknowing that there are no Dustcovers included for the Fan or radiator openings. The Top Covers are just plugged in the existing mounting holes for the fans. the sidepanales are screwed in with the…
Download ? Please Like Thx BMW R1200RT Oil COOLER Gril Just like the BMW Cars (kidney's) Glue the parts and aad some mesh
BMW R1200RT Keychain Download ? Please Like Thx
Lost a damper ring for my 2016 K53 BMW R2100r quick print for temporary replacement. BMW part number: 31 42 7 677 987 NOT FOR LONG TERM USE, REPLACE WITH MANUFACTURER ORIGINAL PARTS ASAP.
I recommend using PETG as it has better characteristics more suited to the environment these mowers run in. A lot cheaper than the manufacturer parts which I thought were prohibitively expensive. You should not need any other fittings…
Spare button for Case Corsair Carbide 200R To obtain the black and transparent effect it, it has to be printed flat on the face and after a couple of layers just use the function “change colour M600 etc…”. we printed with 0,25mm nozzle…
The original part broke on the unit of a friend, and he asked me for a replacement. The result fits really well. it's designed so the hooks get printed separately so they are oriented during printing in a way that they will be strong…
Bonjour, je vous propose ce modèle de support d'un bouton des feux longues portées pour une BMW r1200RT. Le support s'insère dans le système de serrage du commodo droit.
Replacement cutting disk for flymo 1200r / gardena mowers. m4 heat set inserts into the outer holes, or could use m4 nuts
2005-2013 Oil-cooled BMW R1200RT have a tendency to break a winshield arm due to metal fatigue in aluminum alloy upper windshield arms. This is a replacement one. Manufacturer PN 46637686677 and 46637686678 Inspired by blueprint by…
A quick design I made for my totolink N200. The mount has a great positive snap fit and allows you to mount it pretty much anywhere. For best results use 0.16 layer height, though words perfectly with 0.2 too. Enjoy, and Happy printing.
BMW R1200RT Kroonplaat beschermer
Remixed this two designs to fit my necessities, I wanted to be able to attach the 200RC FPV watch screen to my Turnigy Evolution. Remezclando estos dos diseños para satisfacer mis necesidades, quería poder acoplar la pantalla del reloj…
A rough replacement for part number 46637681432 Can be just inserted from the top, clicks in place by buldging on the stem Print from the softest TPU you can find. I have printed it on the side with supports for stem part. I find it a bit…
ces la plaque qui se vis pour casher les vis de fixation slot PCI voir photo model
Low-profile GPS/navigation mount for the BMW K1200RS (K589). I designed this mount because I wanted to install a navigation device centrally on my K1200RS without using a long RAM arm or a bulky handlebar mount. The goal was simple: keep…
Just a quick replacement part for the Corsair 100R and 200R PC cases, it replaces the original PCIe cover if you've lost yours Screws into place with standard PC screws; recommend PETG, ABS, ASA etc but you could probably get away with…
Dust cover for the steering damper. I printed it with TPU.
I would recommend at least 0.2mm layer height. Add pause at 3.4mm layer so you can insert the key and print the bridges over the key. MAKE SURE that you key is not bent otherwise the bridges can fail/deform.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
