Counting matching models…
The Rear Panel kit for the rc2014 is and excellent addition to your DIY vintage computer, but I never really liked the two large openings in the back of the panel to access the modules. The Bump-Out-Boxes for the rc2014 solve this…
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
A simple panel plank for the rc2014 Rear Panel Kit written in OpenSCAD. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Full source code on Github:…
Mac Mini Stand for 2014 Late. PETG and PLA compatible. If your MAC mini gets very hot, I don't recommend printing with PLA.
The AC vent horizontal bar on my Prius 2014 became loose. Works best if printed in PETG (or any other heat tolerant material)
This is a mount to house a USB-C and HDMI adapter instead of the Aux and USB-A that comes stock. I designed this to fit the USB-C cord that came with the Sony XAV-AX6000 Head unit. I used this HDMI cord from amazon:…
I had a new head unit installed in my 2010 GM Silverado Z71. After the install, the drivers center vent wasn't able to be controlled any longer by the wheel. I puled it and found that the arm was missing, so I made another one in cad &…
Ever need to fit a larger cup (RTIC) or water bottle (Owala) in your console cup holder and just end up frustrated? Pull out those narrow inserts and replace with one of these. I have not tried TPU yet, but I don't see why this design…
here is the elusive glovebox covering plate for the Mazda 2 DE 2007 to 2014. this plate just sits on top of the magazine opening to provide privacy for your items inside the glovebox. its easily lifted out of the way so you can access all…
Radio volume control knob Ford Sound 2004-2014. Print 4-5 perimeters, from the outer layer to the inner membrane. The layer height varies at the top. For dimensional accuracy, use a hole size compensation of 0.08-0.012.
3d scanned and improved in 3d software to tighten the c-clip part. This was from a ford fiesta 2011 but fits 2009-2014
No supports. Available in two versions: without a seal and with a seal for scratch protection. I used PLA with a 0.16 mm layer height.
This digital package includes both a high-resolution raw 3D scan and a highly accurate, reverse-engineered CAD model of the rear passenger compartment air vent, specifically designed for the Renault Trafic Generation . What’s included:…
I recommend using ASA material since it may see rain and will be out in the sun. 4 walls Gyroid fill .15 structural or adaptive for best look
My brother had the pins in his IKEA PS 2014 lamp break, so he sent me a few pins and I created these replacements for it. I suggest using brim and normal supports to print these. Don't print them upright or they will snap, print them on…
This is a phone holder for a Kia Optima 2014. It's Designed for a Samsun S21 Ultra using an OtterBox phone case. It is meant to slot into the Kia center console (empty space) Note that if you print this with a .4 mm nozzle, the thin wall…
Box (rámeček) pro DVD mechaniku pod Apple Mac Mini 2014
v5 Added bracing between the sides & rear v4 Increased size for clearance over the 12v plug cover. Increased holder for phone size: 81mm wide 15mm deep 56mm tall With a plug cutout. Ignore my stringy wet filament :) Print Settings Printer…
The model use no support exept the ring holder part. Print it with your standard printer setting. Hardware: 2x M3x5 plastic insert 1x M3x8 countersunk screw 1x M3x6 countersunk screw Housing V2: Strengthen ring holder
I was trying to replace my Dell Soundbar AC511 with a pair of better speaker units. To mount the new speaker units (which have two readily available screw holes per unit), I reverse engineered the mount units of AC511, and created this…
This is a simple case for the RC2014 Micro computer board (a single-board computer based on the Z80 chip). The board will just slot in to the top of the case, and there are cutouts for accessing the FTDI serial pins and changing the…
New spool holder for old-type (wooden) Flashforge Creator. Fits standart 1kg filament spools. You should rotate holder model upside-down in your slicer. Print Settings Printer Brand: FlashForge Printer: Creator Pro **Rafts:** No Supports:…
The Rear Panel kit for the rc2014 is and excellent addition to your DIY vintage computer, but I never really liked the two large openings in the back of the panel to access the modules. The Bump-Out-Boxes for the rc2014 solve this…
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
A simple panel plank for the rc2014 Rear Panel Kit written in OpenSCAD. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Full source code on Github:…
Used for covering up the lower dish in the 2014-2019 Sierra center console Printed with TPU, 15% gyroid infill, 3 perimeter walls
A kit card of the 2014-2019 C7 Corvette model. The axles need glue and if applied carefully the wheels should spin.
This model is from thingiverse made for the ikea lamp (ps 2014) by dagoma3d Original user profile: https://www.thingiverse.com/dagoma3d/designs Original website where the model is from: https://www.thingiverse.com/thing:2824759
This is a 2014 Fiat Panda converted for 3d printing from the recent AgentY Traffic pack, it is a hollow model and made solid for printing, it comes out best if scaled to 140. Enjoy printing!!
I hated all the vent holders out there and our Sequoia didn't really have a better place to place a phone. Everything on the market bends the vents blades and are a flimsy connection. I think the models are 2014-2021. I know it fits a…
If the measurements are off, let me know. I had two photos to go off of and used a nickel (21.21mm) for scale! :D
After setting where motorized or non-motorized flying model. Ease of construction, saving basic and cheap model making hobby.
After setting where motorized or non-motorized flying model. Ease of construction, saving basic and cheap model making hobby.
one of the panels broke so i designed a very basic joint to fix it. it takes a bit of force so no glue necessary. dimensions are accurate, i had to print mine at 100.5% though
This is pretty specific to my setup but if you have a 2014-2018 subie and a phone with a pop socket you can use this too. I also made just the mounting arm if you want to attach your own mounting solution. Installation is pretty simple.…
ssogaard 's Oil funnel remixed for 2011-2014 F150 5.0. Funnel is keyed to match oil cap.
Transform the underutilized cubby in your 12th-generation Ford F-150 (2009-2014) with this custom insert designed to mount the Auxbeam AR-800 RGB Switch Panel. This is a heavily modified remix of a model originally found on Thingiverse…
I needed to modify the cover for the headlight to accommodate new LED bulbs which have a pretty big radiator on the back. As I couldn't find the model of the original - I made one myself. The model is as close to the original as I could…
iPhone 12 / 13 / 14 / 15 / 16 Pro Audi TT Mk2 (2006-2014), Audi Q3 8U, CD Concert Support Changelog: V2 - Added power button and volume button, respect the orientation of the phone, and extended compatibility to Audi Q3 8U (2010-2018)
Ford Expedition Overhead Console Hinge This is a replacement hinge for the sunglasses holder or conversation mirror in the overhead console of a 2007–2014 Ford Expedition . Print Settings: Supports: Tree Infill: Any (100% preferred)…
This replaces the plastic screw that fills the extra roof rack hole for 2014 Subaru Outback... It keeps the leaves and gunk out when you're not using that mounting position. Safety note: this is not a replacement for the load-bearing…
This is a simple repair clip that securely connects broken segments of the IKEA PS 2014 pendant lamp together.
Mac Mini Stand for 2014 Late. PETG and PLA compatible. If your MAC mini gets very hot, I don't recommend printing with PLA.
Fweddie is a plush of freddy fazbear. My friend on roblox is lil_bee047 his character is named zeke. and fusionzgamer!!! Check out us on roblox! Mine is 1friend2014. my friends is Lil_Bee047. And FusionZgamers is NotFusionZgamer! TELL ME…
Shade Hook Part for Mercedes ML series 300 350 400 2012-2015
Great original design, but I needed to do a few tweaks. This is a shorty remix version that will print a bit quicker. I noticed the left side had a bit more rigidity so I cleaned that up a bit and mirrored the design. I cut down the…
EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder Print with ASA or ABS (high temperatures…
Bulb style tree ornament with "Happy Holiday's 2014" on the face with integrated holder hoop. Instructions Best printed @0.10mm layer height with support on a raft. Though 0.20mm will work, the quality is much better at the higher…
A simple coin tray for a 2014 Jeep Grand Cherokee (or a similar model). This coin tray features dividers to separate quarters, dimes/nickels, and pennies from each other and fits in the driver-side doorhandle and can be easily slide in…
Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016 Text version can be modified so that you can add some text to your bumper Category: Automotive
Moto 360 2014 (1st gen) dock that can be used to access adb and fastboot. The smartwatch is held in place using the friction. Requires: - 4x pogo pins (type: P75-B1, https://www.aliexpress.com/w/wholesale-P75%2525252dB1-pogopin.html ) -…
Customized version of http://www.thingiverse.com/thing:191198 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=191198 Instructions Using the following options: text_height = 11 text_font =…
As space in my office is limited I store my filament in my Nordli drawers, which have open cut-out handles by design. However, since some of my filaments are very hygroscopic, I needed to tighten the airgap, thus decided on a custom…
Full Unreal Tournament logo plate from the 2014 era. Using topmost layer ironing might be a good choice for the best symbol look.
It will fit only if you have NO SIDESKIRT on your Ford Transit. Example of no sideskirt:✅ Example of sideskirt: ❌ Also you need a bracket to connect it. Fits for mount points with code 16D268 and maybe 16A267. It looks like this, but it…
BMW S1000R fork guards 2014-2020 needs 6 3mm button head screws. I printed in PETG and tri-color PLA. 15% infill and 3 walls on my XL. Open and slide the upper thicker fork side first. Then slowly slide the rest of the fork into the…
The AC vent horizontal bar on my Prius 2014 became loose. Works best if printed in PETG (or any other heat tolerant material)
I thought it would be cool and neat idea to find and mix a bunch of models into one (since making models from scratch isn't really my specialty) to make a quad lock for the vent, especially since I personally wanted to mount my SCT X4…
Durch anbauen eines Korbes an den Lenker musste ich das Display um 55 mm versetzen.
EN Hood Latch Cover 8J8863471A Audi TT 8J 2006 - 2014 IT Cover - Sportellino serratura cofano posteriore, parte del codice 8J8863471A Audi TT 8J 2006 - 2014
This is 2010 - 2014 Mustang seatbelt Presenter Arm. I used more strength points and tried to make it an OEM easy replacement. OEM uses ABS material, but I suggest using ASA, and it came out great without printing issues and designing…
cargador usado: https://s.click.aliexpress.com/e/_om8bsa7 https://amzn.to/4o9UKJr This model has been tested using PETG material. It installs on the console containing the USB ports and includes two rubber-type wireless chargers, which…
I was missing one of these for my 2015 silverado so drew this up after fixing the unfortunately common broken door harness wires. Print on it's side for the most strength, I used PETG but should work fine in other materials. Let me know…
I made this part for the 2014 four door Dometic fridge in my 2005 Fleetwood Bounder, because the original part broke off at some unknown point in the past. My Fridge does not stay closed because of it, so it was important to fix asap.
Ролик приёмного устройства каталки Микромонтаж УП-ММ 2014 ( https://www.mikromontazh.ru/product/ambulance/111/718/ ) . На фотографиях само приёмное устройство с родными роликами и отдельно напечатанные ролики. Микромонтаж всё сделал как…
This is a replacement part for the upper dash mat in a Ford F-150 year 2009-2014. Part 9L34-15044L06-A B Seems the original deteriorates in the sun and the OEM part disintegrated during a simple vacuuming. Replacements are available but…
Lauren and Dave 2014 OpenSCAD development version with text() preference enabled. Customize at: http://www.jbcse.com/customizer/ Here's the font used: https://code.google.com/p/googlefontdirectory/source/browse/#hg%2Fofl%2Falexbrush…
This is a remix of Penobscot's outstanding iPhone mount design. I added v-slots to the mount and v-posts to the back of the phone holder to allow for rigid assembly. With supports, I was able to print a great looking 2-piece assembly with…
This is a replacement for the sync module that has a usb and aux input for a 2009-2014 f150. Using this part along with this USB cord ( https://amzn.to/2upzINH ) you can replace the original for using an aftermarket stereo. This is also…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This adapter allowed the connection of a standard 150mm flex hose to the output of an Easy Home LE2014 dehumidifier unit so that you can direct the dry air anywhere you need to dry out damp spots, linen cupboards etc. I've made the…
Eine kleines Kästchen, dass in die vordere Ablage der Mittelkonsole passt und einen Schlitz für Münzen hat.
Dieser Adapter kann einfach unter die Verkleidung geklemmt werden. Ich habe zusätzlich noch ein doppelseitiges Klebeband verwendet. Damit sitzt der Halter sicher und fest. An dem Adapter kann dann z. B. ein Handyhalter befestigt werden,…
Just altered the model to have a 17mm ball (a pretty common size for phone car mounts).
Simple platform for you to put a dash camera on with double sided tape that secures to the middle head rest on the Toyota Tundra Crew Max. Vehicle used on is a 2019 model year. YMMV with a different year but it should fit all second gen…
Hook your Nitecore Charger on to wall or bench out of the way and always accessible. This version is for Nitecore charger i2 version 2014
This is a mount to house a USB-C and HDMI adapter instead of the Aux and USB-A that comes stock. I designed this to fit the USB-C cord that came with the Sony XAV-AX6000 Head unit. I used this HDMI cord from amazon:…
I lost the push button for one of the headrests in my skoda fabia. It doesnt work perfectly, but better than no push button.
Valentine's day, valentine's day... valentine's day. The people who organise the now famous "3DPrintShow" didn't think of people like me when they decided the date for their first exhibition in New-York City : February 12 to 15... It took…
Die Innereien der vorderen Armlehne beim Dacia Duster rekonstruiert. funzt. Armlehne lässt sich leicht zerlegen.
I had a new head unit installed in my 2010 GM Silverado Z71. After the install, the drivers center vent wasn't able to be controlled any longer by the wheel. I puled it and found that the arm was missing, so I made another one in cad &…
Small case for the RC2014 TTL Logic probe ( https://z80kits.com/shop/ttl-logic-probe/ )
🔧 Mitsubishi Outlander PHEV 2014 – Deep Headlight Dust Cap for LED Upgrade Designed to solve LED headlight clearance issues This model is a deep / extended headlight dust cap created for Mitsubishi Outlander PHEV (2014) , intended for…
Sometimes we need more light in our living room (Birthday parties etc.) than the IKEA PS 2014 lampshade can provide. Therefore I created the following lampshade that fits the IKEA holder. Now we just switch the lampshade and have more…
Photos to be published soon ! This part is a remix of another dock initially made for the smaller iPhone 12 (Pro) to be mounted on the cup holder on your Mercedes-Benz Vito W447 (2014-2022) . The dock allows for a seamless integration of…
Rock Shox PIKE 2014-2018 wrench 24 mm for air chamber token 100% infil, 0.2 layer
***Disclaimer: i made the part as close to the original as i could but i can't guarantee correct fitment, so results will vary. my friend's vitara had some of its flanges bent, and while it fitted fine, it fell off after a week and cant…
Overview This tray will fit nicely in the empty "change slot" hole in GMTK2XX platform vehicles. This does not require any tools (except a 3D printer) and there is no need to permanently modify the vehicle. Vehicle Compatibility It should…
Ever need to fit a larger cup (RTIC) or water bottle (Owala) in your console cup holder and just end up frustrated? Pull out those narrow inserts and replace with one of these. I have not tried TPU yet, but I don't see why this design…
here is the elusive glovebox covering plate for the Mazda 2 DE 2007 to 2014. this plate just sits on top of the magazine opening to provide privacy for your items inside the glovebox. its easily lifted out of the way so you can access all…
Radio volume control knob Ford Sound 2004-2014. Print 4-5 perimeters, from the outer layer to the inner membrane. The layer height varies at the top. For dimensional accuracy, use a hole size compensation of 0.08-0.012.
Printed with sla, Can do it with FDM also with support. There is 2 files. As on the pic, with and without "holder" You can print in any color and that spray it with same color like your car.
Jeep Grand Cherokee 2012 Model, headlight fender cap cover tested, workds perfectly
Updated replacement cap with clips for a Mazda CX-5/Mazda6 shifter switch ignition lever KDY0-46-040.
3d scanned and improved in 3d software to tighten the c-clip part. This was from a ford fiesta 2011 but fits 2009-2014
