Counting matching models…
Small Measuring cup 20ml for Household Print Settings Printer: Own Build ndl V2 Rafts: No Supports: Yes Resolution: 0.125 Infill: 25% Filament: Generic PLA, PETG, ABS doesnt matter Notes: I printed it in ABS Category: Household
Features Scoop Volume : 20 ml Robust : 2.4 mm Wall thickness Slim design for high slim boxes Long tip to reach corners Low Material Usage: 13g Print Settings Layer height/Resolution : 0.4 mm Nozzle Size : 0.6 mm Infill : 100% Material :…
Two sided measuring scoop This model is a two sided measuring scoop with a volume of 60ml and 20ml for example washing powder. Most washing powders require a dosage of 60ml or 80ml. With this scoop it very easy to get the perfect amout.…
Just a little measirung cup I made for washing powder. The volume measurments were made in Fusion360, not 100% accurate but within +-2ml. Printing was very straight forward, no special settings, just PLA basics with a little line of…
Print orientation as it comes from the file, 100% infill and no supports works fine Updated May 08 2024: Reworked handle for better stability
During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. There is a holder for 20 ml, 10 ml, 5 ml and 3 ml syringes.
Orange Juicer 3D Model – 3 Sizes Available (420ml, 590ml, 740ml) Designed specifically for large oranges, this juicer comes in three sizes: 420ml, 590ml, and 740ml. Each size is perfect for extracting the maximum amount of juice…
Gridfinity Loctite 401 20ml Holder 1x2 Holder for loctite 401 Fusion360 File included to mix sizes to your own requirements. Other models Check out my other models https://www.printables.com/@Micah_754861 Category: Organization
Just a simple subtraction to fit a 120ml bottle of vaping liquid. It is a tight fit, so expect it to come off with the bottle, but don't worry, it won't fall ;)
Print your own Pioreactor 20ml v1.1! The Pioreactor is a simple 20ml bioreactor built on a Raspberry Pi. What's a bioreactor? It's an optimized “home” for microbes, like yeast, bacteria, and algae. Bioreactors come in many different sizes…
An easy-to-use stand for the Pioreactor's 20ml vials (28x56mm) vials. We use it in house to prepare vials, inoculate, and move around the lab. Print details 15% infill 3 vertical perimeter 0.2mm layer Print on one of the open sides
UPDATE: Added 3 smaller nozzles that require less filament. <<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>> Second update: I purchased a tube of Loctite brand plastic glue and compared the strength to the Bostik glue. Check out my other…
https://detail.tmall.com/item.htm?id=624755897644 20ml ptfe hole cap
This is an organizer of Amsterdam acrylic paints of 20 ml for 24 units.
This my take on a TheRooster's design: https://www.printables.com/model/11942-ikea-skadis-pegboard-paint-bottle-holder to accomodate 20 ml bottles that I bought from: https://www.aliexpress.com/item/1005008371666899.html . The bottles I…
Made for 120ml, 44x44x105 outer dimension jars, lids are 42mm diameter Labels of about 25x50mm fit nicely, e.g from Avery I used these: https://www.amazon.de/-/en/gp/product/B0CVHHPGH8/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Fits 10…
Was requested the file of my Rad Lab Loobtoob 20ml holder. I simply hot-glued it to my pegboard since I don’t need it to be mobile around my shop.
Gridfinity 1x1 Nano Polymer Holder (120ml)
Print your own Pioreactor 20ml v1.0! The Pioreactor's printable pieces are available to be 3D printed on any machine. Recommended print instructions for most pieces Print settings: 0.15mm QUALITY 0.4mm nozzle Filament: matte black PLA or…
Modular Syringe Holder for 20ml, 10ml, and 5ml Syringes This modular syringe holder is designed to accommodate 20ml, 10ml, and 5ml syringes, with each module being able to connect to another, either with or without magnets. Each module…
# Human-Readable BOM for Pioreactor v1.5 . ## Important Scope Note This is the base Pioreactor v1.5 assembly only. It does not include a Raspberry Pi or microSD card. Those are listed separately in related finished items: ## Main Build…
This model is a 20ml measuring cup for like Listerine mouthwash
This is a Multiboard pushfit holder for the 120ml bottle of Vision Miner Nano Polymer Adhesive. It is a quick remix of @Eclsnowman's version for 20x20 extrusion mounting. But it has a little looser tolerances and air holes. I created it…
Made this little holder to make 20mL bottles of Ferris Wheel Press ink less prone to tipping over. Hope it's useful for someone else! The base of the ink bottle should sit nicely in the cutout and keep the bottle upright, or you can lift…
Since the Sistema Brilliance lid holders are a bit bulky and doesn't do too well with universal lid holders without scaling them too much I decided to just make a dedicated holder for these lids.
Designed for ground coffe, Saeco Espressor spear 20ml portion cup. Less than 1h to print.
Cup&Cino Becherhalter Paper Cupholder 20oz - 590ml 12oz - 300ml 4oz - 120ml
This is a measuring cup for small volumes, e.g. to measure washing powder. The stl file is suitable for measuring 20ml and 30ml. We use it to measure washing powder for the washing machine. With the OpenSCAD source code, the measuring cup…
Ive caught the gridfinity bug, so here is a bin for my favorite high temp glue! Can accept 6x2mm magnets on the bottom if wanted. Nice and simple gridfinity print. Should do fine on almost any FDM printer with no supports. Thanks for…
Paint holder for Italeri painting (20ml) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,25 Infill: 10% Filament: eSun PLA Twinkling Black Category: Hobby
Measuring set (1ml, 2ml, 5ml, 10ml, 15ml, 20ml)
Neatly holds (2) 20mL vials and their caps to prevent them getting knocked over. Also has holes for (3) 5mL conical vials and 2 pairs of tweezers. Can be printed as low as 5% infill, but 20-50% gives it some nice weight.
Use this holder for the Dr. Brown's narrow glass baby bottles. It works great if you want to use the glass bottles for pumping breast milk without the bottles falling over when setting them down.
This is a simple 120ml / 42mm diameter Vape liquid bottle mount which is compatible with Multiboard. It incorporates a Multipoint rail slot into the design meaning it should be compatible with both Rail pop-ins and lite Multipoints. I…
Our lab uses gridfinity for organizing our research 3D-printers, and we finally made a base for 20ml vials that we use for storing resin, solvents, and samples. The base has holes for magnets that hold firm to the optics tables that the…
Son unas pequeñas modificaciones para que en el extrusor de fux pueda usarse una jeringa de 20ml, y para poder colocarle una tuerca M5 al eje central. de este modo ahora también tengo un extrusor de grasa sólida. Este modelo al utilizar…
Scoop for whey , it has 120 ml of internal volume which is approximately 45g of standard 80% whey concentrate.
simple measuring cup for measuring the scented liquid to be inserted into the washing machine. Inside the model there is a 10ml mark and a 20ml mark My wife puts it directly into the laundry basket, after pausing the wash just before the…
Hello! I’m happy to share this snap mount I designed—no glue or screws required—to stabilize the tall and wobbly 20ml oil bottle from Prym. Just push the bottle in, and you’ll find it easy to use with the stabilizer. Enjoy the…
I bought a 120ml bottle of Vision Miner Nano Polymer Adhesive today at Microcenter while picking up filament for a few projects. I had finally run out of that sample they provided for free years ago. So I gave it a place of honor on my…
Support for 17 and 20ml paint cans. Comes in 2 versions for 17ml and 20ml sizes, although if you have both it is advisable to print the 20ml version so it can be used for both sizes. It is composed of a modular system in which each part…
A boot for the Ecolife 420ml coffee thermos. Works great printed with PETG, other materials might be fine as well. This is a tight fit and moderate pressure is needed to snap-fit the boot to the thermos, but is very secure afterwards. A…
I was using my PET Gloop and knocked over the bottle, spilling half of this amazing adhesive. I then decided I never wanted this to happen to me or anyone else again. I oversized the receptacle a little bit and included the Freecad source…
Needed a container to keep moisture sensitive material dry but didn't have silica gel packets laying around. This is best suited for use with loose silica or molecular sieve beads (dia. greater than 2mm). There is a 3mm hole in the middle…
Roborock Messbecher 20ml zur Anbringung an Flasche
A Tube holder for the SKALAR SA1074 (SAN++ Autosampler). Designed to hold Sarstedt 120mL flat bottom tubes ( https://www.sarstedt.com/en/products/laboratory/reagent-centrifuge-tubes/tubes/product/75.9922.412/ ) I made this for big runs…
The main cylinder of the bottle is 25x53mm, the whole bottle height is 90mm. The plastic parts of holder are squished between bottle base and cap. The metal nozzle should be trimmed in half and a little bit of material should be removed…
20mL Vial Dispenser - with Multiboard snap
simple measuring cup for measuring the scented liquid to be inserted into the washing machine. Inside the model there is a 10ml mark and a 20ml mark My wife puts it directly into the laundry basket, after pausing the wash just before the…
We all love our Vision Miner 120ml Nano Polymer from MatterHackers, or maybe you vape! Perfect bottle fit, gridfinity and style.
bottle case for 5ml, 20ml and 50ml the bottles are from here: https://www.aliexpress.com/item/1005006061515843.html -> they are not all 100% the same height, i took the highest to build the cover if you need a specific height, let me…
Simple 120ml Elmer's Glue bottle holder. Push fit for Multiboard snaps. Printed on Bambu X1C using grey PLA pro filament as pictured.
Keep your art space neat with this compact, 3D-printable paint organizer. Ideal for painters who want quick access to paints and brushes while keeping their workspace organized. Capacity: Holds 21 standard acrylic paint tubes (Amsterdam…
A holder for 120ml Ejuice bottles. 7 pillars. Print Settings Printer: Duplicator I3 PLUS Rafts: No Supports: No Resolution: .20mm Infill: 20% Category: Hobby
Quick and simple design for mounting your Magigoo 120ml bottle on top of your printer. I suggest printing two for extra grip. Category: 3D Printer Accessories
Model on photos was printed with PP (Fiberlogy PP) but you can use any material.
I travel a lot a few days at a time. I wanted something that wouldn't take up much room in my bag and would let me find things quickly. This is made for 20ml bottles - these ones:…
We all love our Vision Miner 120ml Nano Polymer from MatterHackers, or maybe you vape! Perfect bottle fit, gridfinity and style.
Holds x6 60ml and x2 100/120ml bottles (and a couple pens) It's an exact fit, so the bottles don't rattle around. Because of this you may want to double sided tape it down. Feel free to remix and open the holes up, but I prefer it this…
Like most things PETG, looks a bit better if you run it through the dishwasher after printing.
Models are made for a Braun Omnifix 20ml Syringe with a 20mm top diameter.
