Counting matching models…
Holds the 4 x 4 = 16 dice with 20 x 20 x 20 mm³ and the playing cards with 50 x 50 mm² The Travelbox closes with a sliding.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
XYZ Calibration Cube 20x20x20mm
use this as your first test print to calibrate your printer
This is a simple calibration cube to help determine the correct flow ratio. It is an exactly 20mm cubed solid shape. Everything below is based on a Bambu Lab P1P with a 0.4mm nozzle, but I would assume you can scale up/down to 0.2mm/0.6mm…
The cube consists of four solids: the main solid is a 20x20x20mm cube that forms the body of the cube. The next three solids have cross-sections shaped like the letters X, Y, and Z. The cube was prepared for the Snapmaker U1 for a 4-color…
Just a simple cube 20x20x20mm Print instructions Category: 3D Printing Tests
Make sure to set minimum perimeter width to 0.35mm, even if you have a 0.6mm nozzle. Use V2
Escuadras para estanterias de armario Print Settings Printer Brand: RepRap Printer: Hephestos Rafts: No Supports: No Resolution: 0.3 Infill: 50% Category: DIY
print resolution: doesnt matter material: doesnt matter Don't forget add photo
A simple test cube. The lettering is exactly centered and 1.2mm wide, the small corners are 0.4mm and the large ones 1.2mm. Indention is 0.4mm (1 nozzle/4 0.1mm layers). Hollow version with 1.2mm walls also available, turning the Z-top…
20mm D6 dice for dual color 3D printing. The body (you can print the body with single color too) and dots are separate files. Tested with BambuLab AMS and Sovol SV04. Instructions for slicers: PrusaSlicer: 1.) Import the body 2.) Right…
Motivation This model is a replacement/repair of a garden metal table, that the foot legs rubber cover got broken due to the age and use. It is for a standard 20x20mm legs square metal profile, therefore the foot leg cover is has a hole…
The parent design had odd sized (20.26) X, Y, and a smaller Z axis. This should be precisely 20 on each side so you actually are calibrating. Thanks to original designer for the rounded edges, it does permit better measuring accuracy.…
Test your printer with this quick model. After printing, measure if each side is 20 mm
20x20x20mm Cube with soft/rounded edges (except the bottom) to reduce measurement failures at the calibrating process caused by blobs or similar. Print Settings Printer: Anycubic i3 Mega & Mega-S Rafts: No Supports: No Resolution: 0.2…
The 20X20X20mm cube is the perfect accuracy test being exactly 20 millimeters in height, length and width. The benefit of testing a printer with this test is that you can see how accurate the printer and hotend are. Please note that…
MX 20x20x20 Right Angle Extrusion Bracket Summary This thing/printable is a simple two hole right angle bracket designed to mount on to 20x20 aluminium extrusion. Within this page you also get an MX model which is designed to be changed…
What is it? This is a collection of test cubes that are marked with each respective layer heights. I have also included a blank cube in the collection if you want to test a specific layer height that isnt included, simply add a negative…
So I needed to connect something to the wall, always handy to have some brackets in the toolbox. Printed in PETG, 25% infill Please like and return you comments. Category: DIY
One more XYZ Calibration Cube Size: 20x20x20mm
20x20x20mm cube for quality samples
Cube de calibration utilisé pour paramétrer le débit de PLA avec une épaisseur de 1.2mm Print Settings Printer: Alfawise U30 Rafts: No Category: 3D Printing Tests
XYZ calibration cube 20×20×20 mm for everyone :) WHITE CUBE IS BEFORE CHANGE SETTING AND BLUE CUBE IS AFTER CHANGE THE SETTINGS (it can be better but my hotend crashed and also I can do same more settings but Im to lazy so it is what it…
This is what should be a 20x20x20mm cube. I made this in Plasticity (plasticity.xyz) to see if the units are unit-ing, and to do a test print to make sure my machine is machine-ing.
20x20x20 Friction Right Angle Bracket Summary This thing/printable is a simple three piece friction bracket used to attach 20x20 aluminium extrusion together. Its ideal when you don't have have the nuts and bolts to attach it using t nuts…
Test your printer with this quick model. After printing, measure if each side is 20 mm
Silly box that will easily hold 36 20x20x20 mm test cubes. There is an extra allowance of 1 mm per cube so they fit easily. I mean, what else are you going to do with them? I have it modeled in Onshape. I can make an STL file for whatever…
