217 models
I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one. I used two M3x8 screws that can cut their own threads, but you can also use M3 nuts to secure them (I did). The two holes are spaces 54mm…
Print approx. €95.57–€116.81 excl. taxPreliminary estimate for PETGSource material: PET
This adapter allows attaching standard quarter-turn actuators to cheap PVC ball valves to automate them. It provides a standard ISO 5211 F04 mount. Mounting The adapter is designed for valves with a body diameter of ~41.6mm. Here is a…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
This is the stop cap for the Mansfield flush town for inside the toilet tank. This should be printed in PETG and at an angle on the bed to the layer lines are not parallel with the threads to increase strength, but I just printed it flat…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Deutsch Ein Ersatzabsaugstutzen für die Metabo TKU 1693. Das Teil hat in der original Explosionszeichnung die Teilenummer 211. Die Artikelnummer lautet 1381695480-324. Sollte auch für die Metabo PKU 250 passen. Ich empfehle folgende…
Print approx. €15.21–€18.59 excl. taxPreliminary estimate for PETGSource material: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
This is the Mountain Cave set. Like this and check out my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name,…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
This is the Village set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
ball diameter 12 mm with bevelled bottom
A border I created using Xander's OpenSCAD file for my HSW. Hopefully, it might save someone else the trouble of finding the best design. It suits wall-honeycomb-k1-211x201.stl for 220x220 size bed such as my Ender 3 S1. Print as many…
This model is compatible with the lego system.
These are various styles of projectiles that fit in Adam-M's Catapult Card https://www.printables.com/model/211679-catapult-card . I printed the catapult in PETG, but didn't have anything to shoot in it, so I made these to fit nicely in…
Wall Support / Mount for Tapo C200 C210 C211 C220 C225 TC70 TC71 WIFI Security Camera Compact upside down wall hanger wich uses original Tapo support (replacement available in the files) 8 holes = 4 positions (set the origin of the cam)…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
Honeycomb Storage Wall 211x201 that you can print in stacks. important to print it with outside up and with ironing enable on all top surfaces. I recommend to print the test file first to see if the print settings is good. After print,…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Mersedes Benz E55 W211
I did not find something like this on printables so I decided to share this with you. It is a reupload of rance0208's rubber band blaster, found on thingiverse. I have remixed it and added alternative left bodies without the window and…
This is the Skull Arena set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This is based on the awesome MIG23MLD-Joystick-Gimbal by tiktrimo over on Github. Do check out the other cool things he's got going on here: https://github.com/tiktrimo https://imgur.com/user/tiktrimo The joystick is a replacement for the…
This is the Ice Spikes set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
A wall hook for the Lego Sian to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The three prongs on the…
This model is compatible with the lego system.
I recommend printing it to every owner of a w211 Mercedes
Just 3d model LADA 2115 SAMARA Great Russian car (maybe)
Update: This concept needs work 7/20/2024 Long story short when made of PETG the skids ended up snapping off after a few times of using the snow blower. I don't think they ever really got worn down. I am going to leave this up as maybe a…
Instead of using mechanical movements for watch builds, I wanted to use quartz movements like the Seiko VH31 and Miyota 2115. Since both quartz movements are similar is size and shape, this casing ring will fit both of them. I designed…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
camera holder for HBV-3M2111 V22
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
Best printed standing with high infill. I prefer stronger filaments such as abs or pc. The support is only needed in the part where there is a latch. In the hole for the screw remove the ready support that is in the model, it is easy to…
Print 2 model just fix the top one on the wall, the second is used to keep the car parallel to the wall
Wall mount bracket for the Unimog Technik 8110 Kit and the Lego Land Rover Defender 42110 Kit. The defender hook is about 6 mm shorter, but you can use the longer Unimog hook for both if you don't mind the front wheels of the Defender…
Wall Mount to use with various Lego Star Wars TIE models. Tested with sets 75211(Solo TIE Fighter) and 75348 (Mandalorian TIE Interceptor) Gives enough clearance to rear for Solar Arrays of both models tested. Makes use of a Head piece…
Print ideally using signal white PETG; vanilla white PLA is also suitable. Since the spare rim uses cross axle and thus can not have a hubcap, you can either print 4 standard versions (with hubcap) + 1 spare; or simply 5 of the “spare”…
This is the First Night set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
i built this because i was too lazy to pay 15 bucks (CZK to USD) it is plenty fo strng for 25 Nm. i recommend printing out PETG min 6 paramterers. it fits ½ inch ratchet.
This model is compatible with the lego system.
Simple CCS adapter holder, can be mounted in the boot using velco or there's an optional ‘clip’ model which fits (snuggly) into the main holder body. I've used the clip version to attach the holder to the edge of the carpet cutout for the…
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
This is the Fortress set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
нужна была модель этой машины, а в интернете нашел только ее оболочку, сделал из оболочки модель для печати
The bracket is angled so that it points centrally to the print bed (when placed at the top). Mount it to the top right of the tophat and adjust the position before fastening it. You need the following parts: 4* RX-M3x57 threaded inserts…
Print in PETG ,ASA or ABS so it can withstand heat
This 40mm PWM fan mount is for 9211-8i cards that use a 30x54x10mm heatsink, such as the Fujitsu D2607 variant. I might even work with the LSI 9260-8i (IBM M5015 variant). Fans are screwed in on the backside so you can add thicker 40mm…
This is the Nether Portal set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but…
Hi Timothy, this was my 1st attempt at it so really pleased. Do check the sizing suits your needs, Cheers Jace My only regrest as I got a bit carried away with the depth of the ingraving ; ) So I had to have another go ; ) so you have…
3D Printed Enclosure for CP2112 Module Description: A two-part enclosure designed to securely house the CP2112 HID USB to SMBus/I2C master bridge module. The design includes precise cutouts for the USB connector, pin headers. Material:…
This extends a standard NMVe 2280 slot to fit a 22110 SSD. It screw mounts to the 2260 and 2280 standoffs and can be pre-flexed to clear components as necessary. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No…
This model is compatible with the lego system.
This is the Last Battle set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This model is compatible with the lego system.
Important: Please load latest version, project is still in progress. Wichtig: Bitte die aktuellen Dateien laden, da das Modell immer noch in der Entwicklung ist. Beim Modell handelt es sich um die Weiterentwicklung und Überarbeitung…
Print on the largest plane supports are required
This design is for inspiration only (or static model). It is designed around components that are no longer sold. My brother and me owned a 1/10th scale RC buggy. After a few years and multiple crashes the body of the buggy was done and…
Ich habe den Adapter für meine Makita DLS211 erstellt.
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
The turntable model published by @DIVO3D_2177560 required a rather expensive bearing that didn't really seem necessary for overall functionality, so I made a printable version that costs pennies and only requires 6mm bearings and 6x3…
A few parts for my Craftsman Bench Grinder. Bulb shade is extended so one can use automotive blinker bulbs. Glue some aluminum foil inside to act as a reflector. Bulb Shade - Part #21126025 Knob - Part #21126010 Tool Rest - Part #21126035…
PLAYMOBIL® Baby Figur 30121160
This is the Dungeon set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This is a replacement clip (handle) designed for the OEM rear side window sun shades on the Mercedes-Benz W211 (E-Class). The clip allows you to easily pull the sun shade up and down, just like the original part. I modeled this based on…
Ein einschubfach dass man anstelle des CD-Wechslers montieren kann. Material ASA/ABS. Walls: 4. Top: 5. Bottom: 5. Infill: 13 %.
3 models in 1 choose the one you prefer
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Remix of a LSI 9211 PCI bracket to be stiffer and printable without support
This is the Wither set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
A wall mount for the LEGO 42110 Defender. Securely holds the defender at an angle to the wall. The mount fits in central part of the underside of the chassis, designed to insert and fit around various pieces, and securely hold via the two…
foot for keyboard HP Category: Computer
This is the Pirate Ship Adventure set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…
This is the Waterfall Base set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but…
Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…
This is the Crafting Box 2.0 set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but…
Remixed u:rjm2112's nice design to accommodate a couple more colors. Use a high infill like 70% to prevent infill artifacts from showing on the top surface. Print at 0.2 mm layer height. Color change heights are shown in the slicer…
FTC 21196 Norwood Industries linear slides. Featuring anti-slip bearings.
Lego Defender 42110 Stand. print with tree support
Split ergonomic computer keyboard. Features adjustable per-finger column stagger, adjustable per-finger splay angle, independent and easily replaceable components. Designed to hold Kailh Choc key switches using Kailh hot-swap sockets.…
I recommend using sandpaper to ensure it looks the best! Mercedes-Benz E55 AMG W211 — Classic German Performance Sedan Miniature The legendary E55 AMG W211 — one of the most beloved sleeper performance sedans ever built. Subtle,…
So my wife's Saturn had a little plastic thingy in her door bust again, rendering the power window useless. The last time we had this $6 part replaced, it cost us $12(!) for the part and another $143 in labor. Even though I found the part…
This model is compatible with the lego system.
I scanned this bust at the British Museum using 123D Catch and my iPhone 5S. I wasn't able to capture the very top of the hair so I reconstructed what I could with MeshMixer. Marble head of the emperor Caracalla (211-217) Roman, 215-217…
A simple bracket for mounting a Ziply/Verizon/Frontied I-211M-L ONT in a Leviton structured media center. Requires 2 #8 panhead screws and two 47615-NYL mounting pins. The holes for the #8 screws are 70mm apart. Print Settings Printer…
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends Polaris razor unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy! This model features…
A stand for the Lego model 42117. Works with the A and the B model
Dieses “Geheimfach” kann über den Tast-Knopf unter dem Radio geöffnet werden. Es schließt automatisch nach 30 Sekunden. Für technische Infos zum Umbau einafch im Chat melden!
made a holder to hold the sockets to the kobalt 211 6 point set everything but spark plug sockets this worked well for me and fit in my usg box it has ¼, 3/8 , and ½
One of my cats would go on top of the air purifier and turn the fan up/down/off by stepping on the button. This cover plate has two pegs and slots into the holes closest to the button.
5211 This is a remix of the fantastic Photo Box game insert created by Gut Shot Games . Enough room for all game cards and instruction book that fits above the cards. Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins…
It is a replacement part for the parts 130650 and 121111 They are the same part with diferent colors
Made it myself cuz coundt find it anywhere Print without Raft, use more than 80% fill and use supports :)
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
Tundra and Sequoia owners who have had their front skid plates on/off multiple times (e.g. each oil change) will eventually experience the failure of Toyota Part #52116-0C090 due to over tightening or material brittleness etc. This 3D…
