P
PrintablesStudio 392
Unašeč struhadel ETA typ 0224/0010.
Unašeč struhadel. Vhodné pro typy: ETA0224, ETA0010. Katalogové číslo: 87000.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
- Downloads
- 76
- Likes
- 6
- Rating
- 5
Search results: 224
222 models
P
PrintablesMarc Bres
Replacement button for Zanussi TDE 4224 tumble dryer
The button cap from our old tumble dryer broke, so I decided to design a replacement with FreeCad Print instructions Printed without supports, with the "touchable" part of the button down and at 0.2 layer height
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
- Downloads
- 40
- Likes
- 5
- Rating
- 0
P
Printablesnzalog
2230/2242/2260 to 2280 m.2 adapter ssd
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
- Downloads
- 7,936
- Likes
- 330
- Rating
- 4.95
P
Printableseliasjonsson
M.2 SSD 2230 to 2242
Needs an M2x3 or M2x4 screw for attaching the SSD to the computer. Pusa Slicer: Filament -> Cooling -> min print speed probably needs to be set to 3 or there might be defects on your printed part. Things will probably get pretty toasty in…
- Downloads
- 3,466
- Likes
- 187
- Rating
- 4.95
P
PrintablesCustomCreations
Voron CW2 Stealthburner EBB SB2240 PG7 Umbilical Mount
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
- Downloads
- 2,629
- Likes
- 298
- Rating
- 4.94
P
PrintablesDET-Man
Cable Bridge PLUS for SB2209 / SB2240
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
- Downloads
- 2,588
- Likes
- 21
- Rating
- 0
P
PrintablesDET-Man
XT30 2+2 Plug for SB2209 / SB2240
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
- Downloads
- 2,274
- Likes
- 35
- Rating
- 0
P
Printablesgareth.ky
Stealthburner / LGX Lite / EBB 2209 & 2240 - Remix
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
- Downloads
- 1,158
- Likes
- 133
- Rating
- 4.5
P
PrintablesNyxCode
PG7 / CNLINKO LP-12 mount for SB2209 / SB2240
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
- Downloads
- 1,151
- Likes
- 96
- Rating
- 5
P
PrintablesNortonTech
Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
- Downloads
- 832
- Likes
- 106
- Rating
- 5
P
Printablesjeronbernal
BigTreeTech SB2209 SB2240 PCB Fan
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
- Downloads
- 830
- Likes
- 118
- Rating
- 5
P
PrintablesTowapa
SB2209 / SB2240 mount for PUG - New Plug
Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.
- Downloads
- 784
- Likes
- 84
- Rating
- 4.83
P
PrintablesHyperspeed1313
M.2 2230 to M.2 2242 Adapter Bracket
Simple bracket that mounts to the standoff screw for the M.2 slot. I didn't like how most options out there have an offset between the bracket screw hole and the drive's mounting edge and/or were too thick for standard M.2 mounting screws.
- Downloads
- 762
- Likes
- 54
- Rating
- 5
P
PrintablesLomax1983
Junction Box (WAGO 221-2241)
WAGO 3-way junction box. Suitable for 3-wire cables with a maximum cross-section of 1 mm². The cover is attached to the box using four thermal inserts with M2 threads. The screws require 5 mm.
- Downloads
- 678
- Likes
- 55
- Rating
- 0
P
Printables3DXman
Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
- Downloads
- 665
- Likes
- 104
- Rating
- 4.5
P
Printablesthall72
Lego Compatible (22484.dat) Bar 2L with Ball Joint-8
This model is compatible with the lego system.
- Downloads
- 633
- Likes
- 44
- Rating
- 0
P
PrintablesMike F
SB2209 / SB2240 mount for PUG
Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…
- Downloads
- 626
- Likes
- 81
- Rating
- 5
P
PrintablesSven Kah
Voron Stealthburner EBB SB2209/2240 fan cover
This is for the original version of the CW2 main body, won't fit BTTs variant.
- Downloads
- 624
- Likes
- 65
- Rating
- 5
P
PrintablesArnoldstrife
Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide/support.
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
- Downloads
- 619
- Likes
- 62
- Rating
- 5
P
PrintablesLittle
SB2209 / SB2240 - CW2 Cable Bridge, PG7
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
- Downloads
- 585
- Likes
- 80
- Rating
- 5
P
PrintablesAfteraffekt
Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief
Remix to add support for the connector as well.
- Downloads
- 537
- Likes
- 57
- Rating
- 5
P
Printablesquietmesh
Silencer for Crosman 2240
This made an incredible difference on my 2240. Now you can hear the hammer when firing. I haven't noticed any negatives on accuracy and the FPS is unaffected. If it does not fit snuggly enough, use glue ;) Make sure you get clean…
- Downloads
- 499
- Likes
- 38
- Rating
- 0
P
Printablesjeronbernal
Galileo 2 3007 SB2209 / SB2240 / SB2040 CAN Bus PCB Fan
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
- Downloads
- 467
- Likes
- 78
- Rating
- 5
P
PrintablesMJ JOO
Galileo 2 2507 Fan Cover for SB2209/SB2240
Maintain a unique style of Stealthburner. No screws reguired.
- Downloads
- 466
- Likes
- 58
- Rating
- 5
P
Printablesseage
StealthBurner - KNOMI - CAN (SB2209/2240) - CPAP - NOZZLE CAM
This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…
- Downloads
- 431
- Likes
- 67
- Rating
- 5
P
PrintablesBlueGooGluey
Stronger Hex Ventilated SB2209 SB2240 Door with 3007 Fan
Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.
- Downloads
- 398
- Likes
- 49
- Rating
- 5
P
PrintablesAfteraffekt
Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover
Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.
- Downloads
- 375
- Likes
- 45
- Rating
- 5
P
PrintablesTrogdor
BTT EBB SB2209/2240 Voron Vented Door
I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…
- Downloads
- 369
- Likes
- 45
- Rating
- 5
P
PrintablesBaze
Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 ECAS
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
- Downloads
- 360
- Likes
- 33
- Rating
- 5
P
Printablesquietmesh
Crosman 2240 Picatinny X3
This is the same as this, but with two added rails; https://www.printables.com/model/326303-crosman-2240-picatinny-for-bipod-or-laser CAD file included
- Downloads
- 353
- Likes
- 27
- Rating
- 0
P
PrintablesOverLord6920
Knomi Cpap Stealthburner sb2240-2209 No Camera
Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.
- Downloads
- 333
- Likes
- 53
- Rating
- 4.75
P
PrintablesPejek
M.2 SSD Adapter 2242 to 2280 slot (NGFF /NVMe)
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
- Downloads
- 314
- Likes
- 19
- Rating
- 5
P
PrintablesJediOne
Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
- Downloads
- 311
- Likes
- 36
- Rating
- 0
P
PrintablesBaze
Voron Clockwork2 BigTreeTech EBB SB2209 SB2240
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
- Downloads
- 305
- Likes
- 21
- Rating
- 5
P
PrintablesIxian
Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide - Original BTT Cable
Print using standard Voron recommended settings for toolhead components.
- Downloads
- 278
- Likes
- 30
- Rating
- 5
P
PrintablesMilan
Crevice Nozzle (35 - 34 mm Ø) for Dirt Devil REBEL24HFC Vacuum Cleaner DD2224-1 and Fein Dustex 25L
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
- Downloads
- 273
- Likes
- 23
- Rating
- 5
P
Printablesnotheotherben
EBB 2209/2240 Clockwork 2 Cable Retainer (v1.1)
This CAN bus cable retention clip is a reworked version of the v1.1 retention clip from the official BigTreeTech GitHub. I created it after finding that the original version interfered with the USB-C port and my extruder cables in a…
- Downloads
- 271
- Likes
- 39
- Rating
- 5
P
PrintablesChad Baker
Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
- Downloads
- 257
- Likes
- 32
- Rating
- 5
P
Printablesquietmesh
Crosman 2240 Picatinny rail
Use 2 M3x5 set screws to fasten. Includes two versions, one with the NEMESIS text as on picture and one with no text
- Downloads
- 254
- Likes
- 27
- Rating
- 0
P
PrintablesGreywolf 55
Honeycomb storage wall 224 by 190 with borders.
The corners are labelled A, B, C and D and the side panels with the two letters of the corner panels between which they are placed. The center panel is not modified. If you have more than three rows of panels in the A to C (B to D) axis…
- Downloads
- 251
- Likes
- 41
- Rating
- 3
P
Printablesquietmesh
Crosman 2240 Picatinny for bipod or laser
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
- Downloads
- 246
- Likes
- 34
- Rating
- 5
P
PrintablesTauser Gonçalves
Voron Cable Clamp Umbilical mod CANbus BTT 2240/2009
Cable clamp with voron logo, useful when using umbilical mod. Hole for ptfe 4mm, cable hole ~5mm
- Downloads
- 246
- Likes
- 34
- Rating
- 0
P
PrintablesJ
BTT SB2209/2240 XT30(2+2) Replacement Shell
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
- Downloads
- 240
- Likes
- 57
- Rating
- 5
P
Printablesmccartbm90
EBB SB2240/2209 Vented Cable Door (Jan 2024 Update)
This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…
- Downloads
- 236
- Likes
- 30
- Rating
- 5
P
Printablesjeronbernal
SB2209 SB2240 PG7/CNLinko USB Strain Relief
same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
- Downloads
- 233
- Likes
- 34
- Rating
- 0
P
PrintablesVixlier
Reolink RLC-1224A RLC-520A junction box
Simple junction box for reolink cameras RLC-1224A and RLC-520A (with included adapter). Square hole at the bottom easily fits crimped rj45 connectors so you can prepare them before installation of the junction box. I've attached the box…
- Downloads
- 231
- Likes
- 19
- Rating
- 5
P
PrintablesJulius3E8
M.2 Mockups for 2242 2260 and 2280 form factors
A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…
- Downloads
- 229
- Likes
- 9
- Rating
- 0
P
Printablestambaru
M.2 SSD 2242 to 2280 adapter
I used this model to install an M.2 2242 SSD in Banana Pi BPI-R3.
- Downloads
- 220
- Likes
- 17
- Rating
- 0
P
PrintablesJohn Chatham
Stealthburner CPAP / Knomi 2 / SB2209 or SB2240 / 3DO Nozzle Cam / Rapido UHF
Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…
- Downloads
- 212
- Likes
- 41
- Rating
- 0
P
PrintablesGaweringo
M.2 extender 2230 to 2242
Overview This is a pretty small and slim extender to adapt a 2230 SSD to a 2242 slot. Specifically, for the 2242 SSD slot on the Lenovo ThinkPad E14 Gen5 (picture). For this the no-lip version is recommended. Note: For anyone coming…
- Downloads
- 206
- Likes
- 12
- Rating
- 5
P
Printablespunjab
EBB 2209/2240 canbus cable bridge M12 gland direct mount
Fit M12 gland from aliexpress. Print thread down with organic supports
- Downloads
- 195
- Likes
- 22
- Rating
- 5
P
PrintablesYuya
EBB SB2240 SB2209 V1.2 Cable Cover Fan
With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers. This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan. Personally I'm running a…
- Downloads
- 194
- Likes
- 14
- Rating
- 0
P
PrintablesTeah
Voron 2.4 A Drive SB2209/SB2240 can cable mount
I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.
- Downloads
- 193
- Likes
- 24
- Rating
- 0
P
PrintablesShortbus
SB2209/SB2240 - CW2 Cable Bridge, PG7 w/ Cutout for Can Cable
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
- Downloads
- 191
- Likes
- 20
- Rating
- 4.33
P
PrintablesZanna44
SB2209 / SB2240 Cable Cover Hex shaped ventilation
Perfect model to print for having a lower temperature near the SB2209 or SB2240 to make them last longer. It also has hexes!!!!! In the near future will be out a model that uses also a small fan to keep the electronics even more frosty!
- Downloads
- 189
- Likes
- 16
- Rating
- 3
P
Printablesdeadlydayne
Voron Galileo PG7 mount for EBB2209/SB2240
This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…
- Downloads
- 181
- Likes
- 17
- Rating
- 0
P
PrintablesHPFan
SB2209 SB2240 PG7/CNLinko USB Strain Relief
I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.
- Downloads
- 172
- Likes
- 19
- Rating
- 0
P
PrintablesHornet331
Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - Lower Switch FIX
In the original model the lower switch recess was slightly to shallow, the switch was standing out.
- Downloads
- 172
- Likes
- 16
- Rating
- 5
P
PrintablesMrBriggs
ZWO ASI224MC Bracket
I was building an Allsky camera and I needed a way to mount a ZWO ASI224MC to the underside of the enclosure. The TinkerCAD OBJ file has been added if you want to modify
- Downloads
- 169
- Likes
- 17
- Rating
- 5
P
PrintablesThomPatterson
M.2 2242 to 2280 Length Extended Adapter
Whoops, I bought a 42mm length SATA Expansion Card but my motherboard only has screws at the 60mm and 80mm mark. This part holds my card in place with attachments at both the 60mm and 80mm points.
- Downloads
- 166
- Likes
- 8
- Rating
- 0
P
PrintablesTigger1972
Strawberry Planter with dish 280x280 H=224
This will fit a Voron 2.4 300 bed or equal. Print with 5 Perimeters, 13% Infill, Solid layers 5 in Top/Bottom.
- Downloads
- 164
- Likes
- 19
- Rating
- 5
P
Printablestidklaas
Galileo 2 SB2209/SB2240 CAN bus Umbilical Mount
Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…
- Downloads
- 162
- Likes
- 19
- Rating
- 0
P
PrintablesJordanJ
SB2209/2240 LGX lite mount
I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.
- Downloads
- 157
- Likes
- 8
- Rating
- 0
P
Printablesthall72
Lego Compatible (95224.dat) Minifig Beard Braided with Hair in Back and Four Ends Pattern
This model is compatible with the lego system.
- Downloads
- 157
- Likes
- 24
- Rating
- 0
P
PrintablesAlex Moore
44224 / 44225 LEGO technic
44224 / 44225 LEGO technic beam 3 with click rotation joint. Male and Female model.
- Downloads
- 152
- Likes
- 16
- Rating
- 0
P
PrintablesCompyNG
Stealthburner SB2209/SB2240 misalignment protector for G2E
The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…
- Downloads
- 142
- Likes
- 22
- Rating
- 0
P
Printablesquietmesh
Crosman 2240 dovetail
Print it standing up, NOT as I did in my picture, that was just me being lazy so I could post a picture of it printed. -Stupid I know ;) Hardware needed: M3X3 Set screw - 2PCS
- Downloads
- 142
- Likes
- 10
- Rating
- 0
P
Printableszr750
Crosman 1322-2240 single and triple picatinny mounts
Single side and triple picatinny mount for Crosman 1322 and 2240.
- Downloads
- 142
- Likes
- 16
- Rating
- 0
P
PrintablesMind2MatterPrinting
Synology DS218/DS220/DS224+ Stand
This is a Synology DS218/DS220/DS224+ Stand to reduce noise and vibration. It also helps with better ventilation. You need door seal stripes at the bottom of the stand with a 9mm width. I used these:…
- Downloads
- 138
- Likes
- 20
- Rating
- 5
P
PrintablesSander Leenders
Lego Compatible (32249.dat) Technic Beam 3 x 3 L-Shape with Quarter Ellipse Thin
This model is compatible with the lego system.
- Downloads
- 128
- Likes
- 9
- Rating
- 0
P
PrintablesTom's Basement
EBB SB2240/2209 rear umbilical cable gland
Avoid tangling the umbilical cable with the Z chain ! This mod is intended to be used with this one : https://www.printables.com/fr/model/363657-voron-v24-trident-rear-umbilical Print the cable gland twice in TPU and use 3 zipties to keep…
- Downloads
- 125
- Likes
- 14
- Rating
- 0
P
PrintablesEchidnaEnigma
Cable Bridge for Stealthburner / LGX Lite / SB2209/2240
I wanted to use the wire strain relief instead of the gland ones, so I extended BTTs cable bridge to work with this stealthburner modification. Compatible with BTTs CANBUS cable clip with wire strain relief here:…
- Downloads
- 124
- Likes
- 6
- Rating
- 0
P
Printableswesson
crosman 2240 forehand
Printed with PETG with supports on the bottom. I put a ventilation slot on the bottom.
- Downloads
- 124
- Likes
- 11
- Rating
- 0
P
Printablesdohmian
Stealthburner EBB 2240_2209 Cable Cover with 3007 Fan for Galileo Extruder
BTT modified the Stealthburner Cable Cover for use with their EBB 2240_2209 Board. My board gets 85°C hot when printing. Therefore I took the redesigned cover from BTT and the remixed version from Sven Kah and made a remix to fit the…
- Downloads
- 119
- Likes
- 12
- Rating
- 5
P
PrintablesPerpetuum
M.2 SSD 2242 to 2280 slim NVMe adapter
I needed a slim adapter for a 2242 to 2280 M.2 SSD. I also added a STEP file for easy modification
- Downloads
- 115
- Likes
- 11
- Rating
- 5
P
PrintablesMats E
Nextion Display NX3224K024 box
A simple box for a Nextion display that could be mounted on a surface (print both) or flush mounted in a hole. Added a variant of the back, with a breakable cabling hole, called Nextion_bezel_back_hole_NX3224_v5.stl Print Settings Printer…
- Downloads
- 112
- Likes
- 4
- Rating
- 5
P
Printablesjv
Stealthburner Cover / external fan SB2240/SB2209
-this is the deeper/wider version of the cover ~48mm deep (front to back if you're looking @ front of stealthburner) -I use freecad, I've included that file, the STEP file and the STL for anyone that wants to keep modifying -if you're…
- Downloads
- 111
- Likes
- 15
- Rating
- 0
P
PrintablesToXIc
CAN Cable PG7 holder for Galileo2 BTT SB2240 Stealthburner
CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209
- Downloads
- 110
- Likes
- 17
- Rating
- 5
P
PrintablesBaze
Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 3DO PCB cable cover
I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.
- Downloads
- 109
- Likes
- 12
- Rating
- 5
P
PrintablesR Wheeler
Intel Nuc NUC6I7KYK 30mm m.2 adapter 2242 to 2230 conversion
I had an Intel Nuc NUC6I7KYK and noticed that it wouldn't accept a smaller m.2 SSD so I designed this little bracket which doesn't take long to print. Enjoy!
- Downloads
- 109
- Likes
- 7
- Rating
- 0
P
PrintablesTonyPTX
Reolink RLC-1224A Dome Camera Mount JB
This JB is a total of 48mm in height w/a 3/4" (19mm) side entry access hole, which allows use of the original Thingiverse JB Cable plug. JB also has a 5mm recess to allow the Reolink camera mounting plate to sit flush with the top of the…
- Downloads
- 109
- Likes
- 10
- Rating
- 0
P
PrintablesGuli
Reolink RLC-1224a
Cam Mount for Reolink Camera RLC 1224a and Dahua Water-proof Junction Box DH-PFA130-E. Printed with Bambu Lab X1 and 0.20mm Strength profil. 6 wall, 100% infill, support on plate. Category: Camera
- Downloads
- 108
- Likes
- 5
- Rating
- 4
P
Printablessmuk3d
Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 Door Cover with Fan
my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug
- Downloads
- 107
- Likes
- 17
- Rating
- 5
P
PrintablesZachstuh
ASTM D2240 Hardness Specimen
A hardness specimen that is able to be used with the ASTM D2240 Hardness testing standard with a Shore D Durometer.
- Downloads
- 106
- Likes
- 6
- Rating
- 0
P
PrintablesLa3emedimension
Cooler Support for my Asi224MC
DISCORD SERVER: https://discord.gg/PmNhTSpWCt MY WEB PAGE: https://la3emedim.fr/ Cooler for my Asi224MC Peltier kit for astronomical camera cooling Support specially designed for Peltier SR-01 5v and ZWO ASI camera cooling kits (224MC in…
- Downloads
- 104
- Likes
- 8
- Rating
- 0
P
PrintablesHanz2508
CW2 main body - ebb_sb2209/2240 with filament_sensor
Download the updated version below: Filament runout sensor for Stealthburner with EBB SB2209
- Downloads
- 101
- Likes
- 14
- Rating
- 0
P
Printablesmarius137
Stackable 2280/2242 m.2 Tray
Stackable Tray for m.2 SSDs. Remix of my DIMM/SODIMM Tray
- Downloads
- 99
- Likes
- 10
- Rating
- 0
P
PrintablesPavel
Reolink RLC 833A, 1224A Junction box
Junction box for Reolink RLC 833A, 1224A.
- Downloads
- 98
- Likes
- 2
- Rating
- 0
P
Printablesterrakuh
Stealthburner CW2 with ECAS and cat ears for EBB SB2240/2209
This design requires a different latch ( https://github.com/EtteGit/EnragedRabbitProject/blob/main/usermods/CW2_with_ECAS_and_optional_sensor/STL/%5Ba%5D_latch.stl ) and a different cover door like (…
- Downloads
- 96
- Likes
- 13
- Rating
- 0
P
PrintablesaffeOHNEwaffe
The Over-engineered Backpack Wall Mount V2 by @HalfDecentEng_222443 Remix
Full credit for the design, hook geometry, and construction goes to the original creator—this remix merely adjusts the orientation of the mounting hole. Print settings: PETG, 15% infill, "Gyroid" infill pattern, 3 wall lines. No support…
- Downloads
- 95
- Likes
- 29
- Rating
- 0
P
PrintablesKristjan Kerec
Tang Band W2-2243s Compact speaker case
You will need: 2x Tang band W2-2243s speakers 8x M3 threded insert 8x Small adhesive rubber feet 2x RCA jack connectors Also an audio amplifier and RCA cables
- Downloads
- 95
- Likes
- 15
- Rating
- 0
P
PrintablesDead Encryption
SB-2240-KNOMI-CAM-LGXLITE
Remixed from aju3169's model to add standard hotend sizes. Also decided to go with the vent option, lol because it looks better. This will work with the kit / file that garteh.ky created. Updates* 080123 Simplified the Model to help with…
- Downloads
- 94
- Likes
- 11
- Rating
- 0
P
PrintablesGurc_32
Handle drill guide/template 32-224mm
Drill guide for handles with spacing of 32, 48, 64, 96, 128, 160, 192 and 224mm. Spacing from the top is from 20 to 80mm. Added another version that goes from 32 to 192mm so it can be printed on Ender 3 sized printers. Printed on Bambu…
- Downloads
- 93
- Likes
- 12
- Rating
- 0
P
Printablesdrago fire
LEGO PART 22407 Weapon Axe Head with Bar
you may need to sand the peg
- Downloads
- 92
- Likes
- 9
- Rating
- 0
P
PrintablesCyril
NVMe adaptator 2230 -> 2242
Warning : it is very small and difficult to print correctly, monitor the printer to avoid any problems
- Downloads
- 90
- Likes
- 7
- Rating
- 0
P
PrintablesSander Leenders
Lego Compatible (32249.dat) Technic Pin Connector Hub with 2 Axles
This model is compatible with the lego system.
- Downloads
- 90
- Likes
- 8
- Rating
- 0
P
PrintablesPepper
FoodSaver V2244 Clip
A friend asked me to make a replacement for a broken clip on their bag vacuum sealer. Flip in your slicer of choice to make a clip for the right side.
- Downloads
- 89
- Likes
- 3
- Rating
- 5
P
PrintablesKenny Reniff
AR .224 Valkyrie Remix of Speed loader
I just resized the model to fit .224 Valkyrie; a friend said it would be cool if the loader worked. I added some leather strips to keep the magazine tight as I'm not good with any cad program to keep that the same and just raise the wall…
- Downloads
- 88
- Likes
- 16
- Rating
- 0
P
PrintablesFlexi-Maker
Eiffel Tower 50 cm – Snap-Fit Kit Card Model (224 parts, no glue)
A detailed Eiffel Tower you print flat and build like a classic plastic model kit. All 224 parts snap together with tight-fitting tabs – no glue, no supports, no screws. The finished tower is 50 cm tall with a 19 × 19 cm footprint (scale…
- Downloads
- 85
- Likes
- 13
- Rating
- 0