Counting matching models…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
Needs an M2x3 or M2x4 screw for attaching the SSD to the computer. Pusa Slicer: Filament -> Cooling -> min print speed probably needs to be set to 3 or there might be defects on your printed part. Things will probably get pretty toasty in…
Simple bracket that mounts to the standoff screw for the M.2 slot. I didn't like how most options out there have an offset between the bracket screw hole and the drive's mounting edge and/or were too thick for standard M.2 mounting screws.
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…
I used this model to install an M.2 2242 SSD in Banana Pi BPI-R3.
Overview This is a pretty small and slim extender to adapt a 2230 SSD to a 2242 slot. Specifically, for the 2242 SSD slot on the Lenovo ThinkPad E14 Gen5 (picture). For this the no-lip version is recommended. Note: For anyone coming…
Whoops, I bought a 42mm length SATA Expansion Card but my motherboard only has screws at the 60mm and 80mm mark. This part holds my card in place with attachments at both the 60mm and 80mm points.
I needed a slim adapter for a 2242 to 2280 M.2 SSD. I also added a STEP file for easy modification
I had an Intel Nuc NUC6I7KYK and noticed that it wouldn't accept a smaller m.2 SSD so I designed this little bracket which doesn't take long to print. Enjoy!
Stackable Tray for m.2 SSDs. Remix of my DIMM/SODIMM Tray
Warning : it is very small and difficult to print correctly, monitor the printer to avoid any problems
This is a clam shell case for 2242 SSD's created in the same style as SD Card clamshells. Required Materials : 8g of filament Assembly : Be careful removing supports from latch. Carefully fold at soft hinge. Version Notes : 1.0 - Original
2242 to 2280 dualsided nand ssd
A printable 3d model for SSD M2 Rack
IMPORTANT YOU NEED THE WASHER TO PREVENT DAMAGE TO YOUR LAPTOP! I made this so I could put a B+M key M.2 NVMe SSD in the WAN slot on my Lenovo Thinkpad T14 Gen1 Ryzen laptop. If compatible the slot is wired for PCIe x2. If the WAN slot is…
Make this bumper plug, for Iveco Bumper plug 5802242097
A printable replacement for the UniFi M.2 SSD Tray (UACC-SSD-Tray) Ubiquiti uses the same tray across UCG Max/Fiber and UNAS Pro 4/Pro 8/UNAS 4, so this should fit those bays too - tested in a UNAS Pro 4 (SSD detected). SSD SIZES 2242 /…
This is a blank for an M.2 2242 slot / card that you can use to make any design you like. No support material needed. I would suggest printing it at 0.2mm or 0.1mm layer height, as the thickness of the blank is 0.8mm. There's two files…
Hi I make a little adapter for Framework 12 to accommodate 2242 sized SSDs. To hold the adapter I use the original small black screw. And to hold the SSD, the M2x3 heat insert is used and M2 spare screw from the laptop. Heat insert (…
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
For ventilation holes, use modifier for the top and bottom solid layers of any shape you prefer. Board example: M.2 To Type-C SSD Enclosure Adapter NVME HDD Enclosure Interposer Board JMS583 Chip 10Gbps Support 2230 2242 2260 2280 Size…
I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.…
For ventilation holes, use modifier for the top and bottom solid layers of any shape you prefer. Board example: M.2 To Type-C SSD Enclosure Adapter NVME HDD Enclosure Interposer Board JMS583 Chip 10Gbps Support 2230 2242 2260 2280 Size…
I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.…
