M.2 bridge 2242 to 2280
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a small bridge to install 2242 M.2 hardware into 2280 slots
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat.
I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.
Required hardware
This one needs an M.2 heat set insert (M2x4), so you can secure everything with screws.
I used https://www.ruthex.de/en/products/ruthex-gewindeeinsatz-m2-70-stuck-rx-m2x4-messing-gewindebuchsen
I made it in a way that it's quite rigid, so far no vibrations could make it come loose.
Printing
Printed this from PETG, I was able to do it without supports.
Notes
You can see the following on these photos:
The M.2 bridge itself
Raspberry Pi 5
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe peryferal Board for Raspberry Pi 5
Hailo 8 processor
Crucial P3 Plus 1TB SSD