Counting matching models…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
juggling around with nvme 2280 sticks, i needed one box for storage. here a first attempt for 7 cards. 4 clips hold it closed, easily openable, fits cards without squeezing them. since i have only cards without heat spreaders, i designed…
This is an adaptation of the m.2 ssd adapter by janek0809. I took their existing Fusion 360 file and edited it to fit an m.2 2230 ssd to a 2280 slot. I also filleted a bunch of sharp corners. The nice thing about this design is that it…
Next revision of the nvme 2280 storage box
M.2 adapter 2230 to 2280 simple and fast print
This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports. I added a revised model name…
Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
I am using serveral M.2 SSDs to clone and backup my computers. For storage and protection I designed a simple M.2 case. This case fits a single M.2 SSD in the very common 2280 size. Printing is easy. Use your favourite material and set…
I have a 2230 M2 SSD and needed to intall it on a 2280 slot.
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
Adapter to mount a M.2 2230 in a 2280 slot. I printed it in Jayo PETG with 3 walls.
A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…
I used this model to install an M.2 2242 SSD in Banana Pi BPI-R3.
The goal in designing these was to achieve the maximum possible density in the smallest possible space, while retaining the ability to stack the containers so they fit into other Gridfinity systems. M.2 2280 holder 1x2 grid units Holds 6…
I made my own M.2 2230 to 2280 adapter, because I couldn't find any would be exactly as I wanted. Thin but holding properly. I printed it using: Bambu lab A1 mini PETG filament 100% infill normal support type Supports are important…
Design Log: I changed the thickness of the piece. Did a thicker base for vertical printing. Minor adjustments for better aesthetic. I printed with PETG (Grey Overture) in a vertical position with supports.
Extend an 30mm NVMe to 80mm. Work with a 0.7mm thick PCB. Category: Computer
Whoops, I bought a 42mm length SATA Expansion Card but my motherboard only has screws at the 60mm and 80mm mark. This part holds my card in place with attachments at both the 60mm and 80mm points.
I used generic PLA with 20% infill and ironing for a better finish, as well as supports. I hope you find it useful.
it's a tight fit but it should work. flexible adator for 2230 or 2260 cards. you should print it in ABS or in PETG under the cpu could get warm.
This extends a standard NMVe 2280 slot to fit a 22110 SSD. It screw mounts to the 2260 and 2280 standoffs and can be pre-flexed to clear components as necessary. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No…
Thanks @choovick for the original version of the model. This one has been modified to accommodate standard size SSDs.
Universal M.2 SSD Adapter (Multi-Format Caddy) This model is a comprehensive hardware compatibility solution designed to extend the life of your storage components. It is a rigid "Caddy" or frame that allows you to install…
I needed a slim adapter for a 2242 to 2280 M.2 SSD. I also added a STEP file for easy modification
Stackable Tray for m.2 SSDs. Remix of my DIMM/SODIMM Tray
Raspberry Pi 5 and 2280 NVME SSD Cooler Case The case has been designed to house an NVME drive mounted under the Pi. The available drive I had was a 2280m, being 80mm, which is longer than the case length, so it protrudes a bit. (I intend…
As I sometimes have to attach NVME's via USB C to my computer and want to be able to chage them quickly i created this little bench You will need: 1x the USB-C to NVME adapter Buy here: https://s.click.aliexpress.com/e/_c39JjrDd…
The ICY-Box IB-2280SSK is pretty cool to have 8x SFF Drives in a Desktop/Server. The cooling fan however, is pretty noisy. To ensure clearance, I created a 70mm (Icybox) to 80mm fan adapter with an extension, which ensures enough…
This case is intended to print without any support. It's a total of four parts - Top, Bottom, 2280m.2 brace and (optional) screen mount. It's accommodates 2280 length m.2 drives. It has mounting place for a 4010 fan above the Pi's SOC.…
Print this with the holes on the build plate, using normal style supports and 25-50% gyroid infill. The supports should snap right off with minimal cleanup required. This is the same part I designed and was selling. JD M122280 585195…
Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…
This is a stand extension for BenQ GW2280 monitor. My table is low and I wanted the top of the screens just below eye level. IMPORTANT: Exclude supports from the middle of the pocket. Support placement is shown in an image above ^. I…
Super compact container box for hard disk 2280 M.2 NVME 34 pieces. Perfectly fitted for 2280 SSD, a very simple print. Very tight tolerance of 0.1 mm. The lid should be a press fit with a properly calibrated printer. If you cannot…
2242 to 2280 dualsided nand ssd
Converts 30mm length M.2 SSDs to a more standard 80mm.
Door for cabin filter for diy install filter. More info here
Stacks with the original DIMM Storage Tray by mars9601. I modified the original solidworks model to create these, leave a comment if you'd like me to upload the .SLDPRT. Both a 2280 only and a 2280/22110 combo are included. The models…
A printable 3d model for SSD M2 Rack
Reimplementation of the original model but with more width to acommodate NVMEs with integrated Heatsinks.
JEYI Thermal Conductive Silicone Pads: https://s.click.aliexpress.com/e/_omRiFoe Recommended JEYI M.2 2280 SSD Heatsinks: https://s.click.aliexpress.com/e/_oER99GA https://s.click.aliexpress.com/e/_opsow18 There is multiple versions of…
This is a blank for an M.2 2280 slot / card that you can use to make any design you like. No support material needed. I would suggest printing it at 0.2mm layer height, as the thickness of the blank is 0.8mm. There's two files included:…
If you like this model please like and download, it helps motivate me to make more! Please consider using the amazon affiliate link bellow for the required hardware! The spacers Raises the Datto Alto V3 up 14mm to increase airflow or make…
Stacks with the original DIMM Storage Tray by mars9601. I modified the original solidworks model to create these, leave a comment if you'd like me to upload the .SLDPRT. Both a 2280 only and a 2280/22110 combo are included. The models…
This is a M.2 2280 storage box designed to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…
I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.…
Very simple spacer to use a 2230 M.2 card in a heat sink and motherboard that holds a 2280 card. The Arctic M2 Pro heat sink reduced the temperature of the card from 65-75 C down to 50-55 C during heavy write tasks. This is only a spacer,…
40 slot m2 2280 drive storage. I printed this with a 15% infill and it was super solid and sturdy. Opted for no lid or latches.
This lets you use a 2280 size nvme drive with the Raspberry Pi m.2 Hat+, which ordinarily does not support this size. Just use two of the screw mounts for the hat to also connect this adapter. I designed this because I didn’t read the…
Bought a cheap SSD to USB-C adapter off e-bay, and needed a cover for it, for mounting besides my raspberry pi. Very tight fit, which is what I went for. Removal might be destructive for the cover. Print slightly oversized if you want to…
This model is compatible with the lego system.
This is a M.2 2280 storage box designed to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
This is cover for mercedes A class w168 with serial number A168 720 02 11. With mirror mode can use for both sides. I printed with low resolution on SLA printer, Can be printed with FDM also with correct orientation. Here is 2 files,…
I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.…
Very simple spacer to use a 2230 M.2 card in a heat sink and motherboard that holds a 2280 card. The Arctic M2 Pro heat sink reduced the temperature of the card from 65-75 C down to 50-55 C during heavy write tasks. This is only a spacer,…
This is a case for a quite common USB to M.2 SSD converter. The Size of the PCB is about 27x96mm. I think its the only design here with ventilation. The case needs no screws. The fit is quite loose to be printable on my not so well…
Very simple bracket to allow m.2 2280 drives to fit on the Datto ALTO 3 V2 board, which is designed to only hold 2260 m.2 drives.
Bracket to allow installation of M.2 2280 SSD in the M.2 2260 slot on SuperMicro X11SSH-TF/CTF motherboard. Requires two M3 heat-set inserts. Install bracket on motherboard in the 2260 retiontion screw hole. Other end provides proper…
