Counting matching models…
A case that I built specifically for the OGX-Mini / Joypad OS projects, but it actually works for any usage you may have for the Waveshare RP2350-USB-A board. The model is built with very tight tolerances, so depending on your printer you…
Small press fit case for the Waveshare RP2040 One version of the Raspberry Pi 2040, it also fits the RP2350 One version which is identical in dimensions. Since I mainly use it for PicoKeys so I don't solder to them, I use them as a USB…
This model is a remix of @PatvdLeer's model, which fits the RP2350 USB.
Case for chinese USB dongle RP2350 (Raspberry Pi PICO2) from Tenstar Robot. PAY ATTENTION TO BOOT/RESET BUTTONS LOCATION before printing. I had to design this case because this particular PCB is not compatible with other RP2350 and RP2040…
Make a DIY YubiKey for only $4. With this configuration, you can use the Picokey with both your PC and your phone. https://www.picokeys.com/pico-fido/ https://pt.aliexpress.com/item/1005008622261552.html…
A compact protective case specifically designed for using the Waveshare RP2350-One as a PicoKeys FIDO2/2FA security key . This case transforms your development board into a durable, everyday-carry USB security device. Key Features:…
I was given an Icom IC-2350H VHF/UHF 50watt radio and I want to make a manpack out of it. However I'm too cheap to purchase an aluminum cage and I own a nice 3D printer. My Fusion360 skills are limited but I'm getting better. This is my…
This is a remix of the excellent PicoKey Case (RP2350/RP2040) DIY YubiKey/Passkey . All credit for the original concept and base design goes to the author — I only adapted the top shell and trimmed everything I personally didn't need. Tip…
The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic…
This is a case for the Waveshare RP2350-One. Both parts snap together to protect top and botton part of the RP2350-One. I used a needle nose pliers to press both parts together as it is a tight fit. printer settings: - Layer height: 0.1 -…
I've been wanting a USB-C female FIDO2 key, but apparently nobody makes them and the only ones that exist are products like Trezor, which somewhat defeats the purpose of having an inexpensive device. Managed to create a case that serves…
Due to the lack of access to technical data, I have scanned the front lamp for Romet 2330-2350. The scan is not perfect, so I've decided aslo to create a housing model in Fusion 360. The housing has not been tested on the motorcycle yet,…
Remix of RP2350 USB Dongle Case to allow hanging it from a keychain
I wanted a case for my DualSense dongle, so I modeled it up with inspiration from the other models already made. Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent. Get the USB-A…
A basic case for the Plasma 2350 (W) from Pimoroni. It assembles with the screw terminal wires already connected, so no need to thread cables through any holes. The USB-C and 4-pin JST-SH connectors remain accessible, and a small hole…
Intended for waveshare rp2350-one/rp2040-one boards used as security key (picofido). Only one button is available when extended, can not be pressed when collapsed. Protects exposed usb header while allowing proper insertion of pcb in…
Build your own FIDO2 passkey using the https://www.picokeys.com/ - https://github.com/polhenarejos/pico-fido firmware and enclosing it in this rugged and small case. ❗IMPORTANT: You need to adjust print settings, otherwise the print will…
RP2350 Security Key Case Remix This is my remix of an existing RP2350 security key case design. I modified the case specifically for use with an RP2350 board running RS-Key , turning it into a compact DIY hardware security key / FIDO2…
This model is a direct replacement for a plastic stem driver that tends to break in some Kohler-brand shower handles. Recommend printing in PETG or ASA for strength. Original part tends to break at the edges of recessed square drive, this…
I needed simple case for the WS RP2350B-P-W board I bought to use as a dualsense dongle with the DS5Dongle firmware Or the D55Bridge firmware
Tiny case for tiny board - https://shop.pimoroni.com/products/tiny-2350?variant=4209263 Originally printed with the following settings: 0.4mm nozzle (high flow) 0.10mm STRUCTURAL supports on build plate only Filament used: original Prusa…
Simple housing for the Waveshare RP2350 LCD 1.47 A and B. Requires 4 countersunk M2 x 3 long screws to secure the board There are no holes for any attached wires, so STEP models included for easy editing if you want those Holes down the…
I remade this model because I needed a version that allows the board to be used without cutting or modifying the connector that comes with it, while still keeping the case as thin as possible. The Tenstar RP2350 board is mainly used as a…
A holder for carrying the PVP2350 probe from Rigol's DHO900 and MHO900 oscilloscopes. I recommend using PETG because it's more flexible. There are no special printing requirements and support isn't particularly necessary. I only recommend…
I wanted something that would allow me to easily attach an 80mm fan to the PCIe slot screw holes. This is for the Plink IPC-2350F 2U rack case specifically. It really should work on any 2U case as long as you have 82mm of clearance…
Before installation, it is necessary to unsolder the connector
Features Minimal, compact enclosure for the Seeed Studio XIAO RP2350 Lightweight print (~4 g of filament) Quick print, beginner-friendly Oriented for easy printing with no or minimal supports Print Settings Material: PLA recommended (PETG…
I have a couple of Pimoroni Tiny2350's so I wanted a custom breadboard for it, they are so small it was a no-brainer. So, dug out an old breadboard, pulled out a couple of the tracks to see how they went together, googled the pin pitch of…
Waveshare RP2350B-Plus-W | Slim SnapFit Case | DS5Dongle A Slim SnapFit case designed for the Waveshare RP2350B-Plus-W, offering an alternative to the Raspberry Pi Pico 2 W for use with the DS5Dongle project and its variants. DS5Dongle…
Use black matte PLA for best effect finish.
Tomat'O-Clock 🍅 - Raspberry Pi Pico 2 W powered Alarm Clock Meet Tomat'O-Clock , a cute and smart tomato-shaped connected alarm clock! This project uses a Raspberry Pi Pico 2 W, a touch screen, and a few simple electronic components to…
Print with the flat faces on the bed, assembly requires a countersunk M3 bolt and threaded insert.
This model makes it easy to press the buttons on the XIAO RP2350.
Case for chinese USB dongle RP2350 (Raspberry Pi PICO2) from Tenstar Robot. PAY ATTENTION TO BOOT/RESET BUTTONS LOCATION before printing. I had to design this case because this particular PCB is not compatible with other RP2350 and RP2040…
Remix of RP2350 USB Dongle Case to allow hanging it from a keychain
Ein einfacher Halter um einen Samsung BX 2450 oder auch 2350 an einem Vesa Halter zu montieren. Ich empfehle ASA CF um ausreichend Stärke zu erhalten. Zudem empfehle ich mindestens 4 Wandlinen und einen Infill von 30%. Je nach Material…
Canon inkjet printer MB2350 paper tray clip Designed by Dave Borghuis in OnShape https://cad.onshape.com/documents/3d211757b19b2de777df0e8d/w/5d13b0c12ca7646c85d06462/e/eb2f70adcba2bd4b66bca701 Category: Office
