22 models
A very basic holder for an Anker Prime Charger 250W (A2345) with an opening for the power cord. The pegs must be glued into the rails. The model is designed in such a way that there are no needs for supports.
Print approx. €10.01–€12.23 excl. taxPreliminary estimate for one variant
The kit includes a back plate to hold the power socket at the case's rear, a clamp to securely fasten the PSU inside the case, and a redesigned case foot to hide and support the protruding power socket at the bottom. This design is…
License: This work is licensed under a Standard Digital File Licence Digital files have a strict non-commercial, personal use only license. Information: https://smallformfactor.net/forum/threads/40mm-cooling-mod-for-hdplex-250w-gan.18419/
Vacuum adapter that fits Ryobi Orbital Sander ROS300 output to Ozito 1250W 12L Stainless Wet And Dry Vacuum
This riser helps convert the TODO / KOGAN / DEVANTI 250w food dehydrator into a filament dryer (They're all clones - you may find more brands that use identical casing and trays):…
Parametric Toolrest for Ferm Grinding Machine (250W) STLs for two angles have been provided, but since the model is parametric, STLs for any angle can be generated 0 degrees (horizontal) 10 degrees (for grinding the lathe tool bits)…
I wanted to use the linked 250W PTC Heater instead of the 500W heater that is meant for the spicy meatball Voron 2.4 heater mount, but it left a large air gap for the fans. This directs the fan air through the heater instead of around it.…
Vetical case for UT3G 5060lp Pico-box ut3g
This is a mounting bracket to support the HDPLEX 250W passive GaN power supply in the Lian Li Q58 using the screw holes that are already present. I've been using this bracket in my personal Q58 build since June. I've also included a…
This is a 45° tilted stand for the Turnigy Reaktor 250W Charger. It's designed to print quite easy and then be screwed together with 6 m3x16 screws. This set of screws from banggood works very well and is very handy to have for a lot of…
This is a 1U shelf designed to mount the HDPLEX 250W GaN Passive AIO ATX Power Supply via the mounting holes on the bottom of it.
Halterung für Aideepen DC 50V 5A 250W Digital LCD Voltmeter Ammeter/Powermeter https://www.alibaba.com/product-detail/Aideepen-DC-50V-5A-250W-Digital_1600587970085.html for fitting into top viewed battery department - for devices that are…
Case for 10a 250w CC CV Boost converter with cable strain relief. Can be printed without any support. You will need 4x20mm M3 standoff and 8x6mm M3 screw (4mm and 8mm length are ok too). Case was designed as counter-sunk for support-less…
Let's you mount the HDPLEX 250W onto the front panel of the Densium 4 Plus PC case without the PSU interfering with the GPU. The PSU is attached to the bracket using double sided tape. I used 6mm wide Tesa 4965 PET double sided high…
This is a replacement case front panel for use with BeamCase SW that allows you to use to mount a HDPlex GaN 250W PSU in the front. If you use this together with my 205mm 3D-printed makerbeam replacements you will be able to get your…
Designed specifically for the Anker Prime 27.650mAh/250W power bank and a tripod with the center column of ~27mm. The mount is designed to be attached/detached to the center column with a bit of force.
This is a heater mount for the Chitubox 250w heater, angled in such a way, so it blows heat towards the opposite end. Mounted to the rear, back enclosure panel for the Sovol SV08, lower left hand side. I use a custom 3d printed enclosure…
This riser helps convert the TODO / KOGAN / DEVANTI 250w food dehydrator into a filament dryer (They're all clones - you may find more brands that use identical casing and trays):…
A very basic holder for an Anker Prime Charger 250W (A2345) with an opening for the power cord. The pegs must be glued into the rails. The model is designed in such a way that there are no needs for supports.
Let's you mount the HDPLEX 250W onto the front panel of the Densium 4 Plus PC case without the PSU interfering with the GPU. The PSU is attached to the bracket using double sided tape. I used 6mm wide Tesa 4965 PET double sided high…
This is a heater mount for the Chitubox 250w heater, angled in such a way, so it blows heat towards the opposite end. Mounted to the rear, back enclosure panel for the Sovol SV08, lower left hand side. I use a custom 3d printed enclosure…
This is a 1U shelf designed to mount the HDPLEX 250W GaN Passive AIO ATX Power Supply via the mounting holes on the bottom of it.
