1 / 6
Chitubox 250w heater mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a heater mount for a Chitubox 250w heater for the Sovol SV08 enclosure.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This is a heater mount for the Chitubox 250w heater, angled in such a way, so it blows heat towards the opposite end. Mounted to the rear, back enclosure panel for the Sovol SV08, lower left hand side.
I use a custom 3d printed enclosure
.2 nozzle, printed with ASA, 4 wall loops, 4 bottom and top layers. Print with organic supports, and orient so that way the flange for the mount faces upwards on the print bed. Infill can be ~10-20%.
New revision recesses the heater more, staying out of the way of the gantry.