31 models
Bottle Adapter for Can 0,33l / 0,5l + Extra File for 0,25l Here it is….. the printable adapter to convert your can into a bottle! Short Snag fit for 0,33l / 0,5l Cans + Extra File for 0,25l Cans E.g. Red Bull Good tightness tested with…
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
Mein Dosenhalter (0,25l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,33l-Variante…
Halter für Müllsackrolle (K-Classic 25l Rolle).
Approximately Ø68mm and Ø80 bags fit and the height is 140mm
I have some 25L water containers with concentrated soap, but I was tired of getting soap all over the place when I only had to pour a small amount. I found this on thingi: https://www.thingiverse.com/thing:5819631 and designed a longer…
Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…
A lid for 0.25-liter beverage cans that prevents insects from getting into the can. Material consumption is just 9.2 grams (3.0 meters) of filament. The lid fits securely on most cans and does not open on its own—this feature has proven…
Replacement wheels for a shop vacuum that was sold by several brands: Metabo ASR 25 Bosch GAS 25L Starmix ARD 1225 There may be more brands There is supposed to be a bushing too, mine was missing and too thin to be printed so i left it…
Inspired by optimumtech's recent YouTube video, I decided to also try a 4060 LP build. However, my printer isn't tuned in right, so I needed something that is a bit less fragile and very easy to print. I also didn't want to use a riser,…
EN: Conversion kit for Lima V80 002 (201625L): NEM coupler adapter and decoder holder fits for ESU Adapterplatine 21MTC (51967) DE: Umbaukit für Lima V80 002 (201625L): NEM Kupplungadapter und Decoderhalter passend für ESU Adapterplatine…
A replacement clip for the Sistema 3.25L Bake It flour container . I found other models of Sistema clips on printables.com and thingiverse.com, but they were all for different size containers. So I made another one! The model doesn't…
A simple rack/holder for 1.25L soda bottles to help organize your fridge. each rack holds 3 bottles and with two printed you can easily and neatly store 7 bottles. Designed to fit Ender 3 size build plates. I printed in PLA with 4 walls/4…
Reusable 3D printed can lid, soda cap, beer saver & can sealer. Fits 0.25l slim & 0.5l standard cans. 100% Print-in-Place & No Support! Wiederverwendbarer Dosenverschluss, Dosendeckel & Wespenschutz für 0,25L, 0,33L & 0,5L Getränkedosen.…
Two Spindle tools to disassemble the spindle of your mill, big tool is for the nut/cover on the spindle nose and the smaller tool for the preload nut in the spindle. You will need 2x M4x25 bolts for the big tool and 2x M5x50 for the…
The mount will be printed directly with supports. Supports is easy to remove after printing and process the landing site with a knife. The mount, like the original one, has a flashlight tilt adjustment. Attaches with two screws holding…
EN: Two types of measuring cups with a volume of 0.125 litres for dog kibble and other bulk products. Printed from PETG, nozzle 0,4mm, layer height 0,2mm, 2 perimeters, without supports. The attached files are in 2 types (higher or lower…
Edit: 2026-03-11: Added solid model files without the hollow. Full repacement pedal for IKEA KNÖCKLA (KNOCKLA) 25L pedal bin. I drawn and printed this because the original one broke after about 2 years. I don't know if this model works…
Silica gel box for Honeywell fire and water proof document box (4.25l). Due to the air and water tightness, the box has the problem of moisture, so that the documents quickly begin to mold without desiccant. To counteract this, this…
Pro pěstování sazenic rajčat jsem vyrobil pařeniště z PET lahve od Kofoly 2,25l. Tato lahev je vhodná protože má rovné stěny. Nejprve se z lahve sejme etiketa, což jde kupodivu poměrně snadno. Potom se fixem označí a ostrým nožem odřízne…
We have several quite old Rubbermaid containers. when counting, I noticed that one of the lids was missing. Having more boxes than lids is not a good thing, so -- search the net, if rubbermaid still makes them? No. search the net, if…
V2.0: Now with improved hinges that are a lot stronger! Trust me! Have you ever had the problem that your camping trash bag is all wobbly and collapses as soon as you want to dispose a banana peel? Do not be afraid, I got you covered!…
As much as we love the Sonnet laundry detergent, the pump for the 25L canister tends to drip onto the floor, leaving a mess. This model catches any drips acts as a nice holder for the dosing ball / detergent ball I recommend using white…
Fabrication d'une poignée pour un panier à linge (marque Curver) : Poignée de remplacement. Impression sans support. Pièces à positionner sur le coté. Pièces à coller avec colle chaude.
PETG recommended, PLA might get by. SLICING SETTINGS: 4-6 walls, 0.2 Layer height, min 25% infill, max 50% infill Has your Husqvarna 125L safety lever cracked? Look no further than this model! My dad has been using this weed eater for…
Filament : PLA Nozzle : 0.4 Layer : 0.2 Support : Organic / Intelligent
This insert basket is designed for the Mestic MCC-35 and MCC-25 compressor fridge. The basket follows the tapered shape of the fridge’s inner walls. Approximate Dimensions Bottom: 325 × 246 mm Top: 331 × 253 mm Total height including the…
Filament : PLA Nozzle : 0.4 Layer : 0.2 Support : Organic / Intelligent
PETG recommended, PLA might get by. SLICING SETTINGS: 4-6 walls, 0.2 Layer height, min 25% infill, max 50% infill Has your Husqvarna 125L safety lever cracked? Look no further than this model! My dad has been using this weed eater for…
