Lego Compatible (32828.dat) Plate 1 x 1 Round with Bar
This model is compatible with the lego system.
- Downloads
- 985
- Likes
- 50
- Rating
- 3
57 models
This model is compatible with the lego system.
This model is compatible with the lego system.
Tapered and Flat Nozzle Attachments for M18 FUEL Dual Battery Backpack Blower ( 3009 ), M18 FUEL Dual Battery Blower ( 2824 ), M18 FUEL Blower ( 3017 ), and the M18 FUEL QUIK-LOK Blower Attachment ( 49-16-2793 ). Also compatible with my…
This model is compatible with the lego system.
I got tired of the case clamps to mount 2824 movements so I went ahead and designed a ring to insert into the case. This is for the 2824-2 movement use the 0.2 nozzle!!!
This is a spacer I created to hold ETA2824 and ETA2824-2 movements in NH35 watch cases. I have printed this in PLA and PETG using 0.2mm nozzle. Please feel free to remix or send constructive feedback. I will upload more pictures when I…
Keep your garage or workshop organized with this 3D printable wall mount designed specifically for the Milwaukee M18 Fuel Model 2825-20 Weed Trimmer. The mount is built for easy installation—holes are pre-aligned so you can secure it…
Gridfinity compliant, low-profile tray/holder for the IWISS IWS-2820M and the IWS-2412M open barrel terminal crimping tool. I did not completely design it from scratch. I used schenklooza 's excellent Gridfinity Parametric Blank bin as a…
This model is compatible with the lego system.
Replacement door handle for Beko washing machine, part number 282878. I've printed it in PETG and it goes strong since 28th of July.
This is a part for the Snapper snowblower model # 8246 called a Block 2-8222. This is not a perfect replica but an approximation. I recommend higher infill for strength. The black part photo is of the original part, the other is of my…
As there discontinued I was lucky enough to get my hands on the last one available. Toyota Part Number: 90010-22031 or 9001022031 | S/S 9001022030 or 90010-22030 Pioner Part Number: CXB8282 (HL15)
This is a quick test for a self designed blade design. It should fit onto the hub of a robbe ROXXY 2824-34 brushless motor (fitting untested, but should be close). The model is customizable, but customization is also still untested. It's…
Motor mount for the Turnigy 2826, 2200kV motor. Another little project off the smokey Anet A8! Two versions; a 90 deg angle mount, good for front mounting. Also a 12 deg tilted mount, which is good for pusher mounting. Also a raised open…
Lego 3020 3021 3022 3795 3034 3832 2445 91988 4282
I love @Kayson_Print_2823596's Valentine's Day Teddy Bear, but wanted to jazz it up a little and add a Valentine's Day message to the heart for my wife, Julie. I started with Smart Fill, but found it wasn't quite getting the job done. As…
Hercules_RC for EMAX CF 2822 MOTORS WING SPAN 1270.40 MM Same electronics as https://www.thingiverse.com/thing:3591259 print shells to print thinner to reduce weight Category: R/C Vehicles
A protective ring cover for Coleman lanterns. It is for 282. Tank outer diameter is 134.8mm. It has a structure that gets caught on the inner processed part and does not come off easily. It should fit a Coleman one of similar size.
Full Description: This is a 3D printed replacement bezel (front cover) for the Zebra LP2824 thermal label printer — ideal if your original bezel is broken, missing, or damaged. Compatible with the LP2824 and LP2824 Plus models used for…
Aucun support nécessaire Pièce de réparation d'un blender Kenwood AT282 imprimé en PLA avec un Infill de 15%
A very old Givi Maxia E50 motorcycle top case. The red release button is no longer available for purchase, so I fabricated one myself (the plastic part only). It is not a professional-grade part, but it is fully functional. You can either…
I have the Mabett Door Side Storage Trays in my truck, found the extinguisher still rattled a little. If you don't have the storage tray insets you may need to expand the outer diameter a bit. Printed in PETG with 5% infill.
Handle for a table for a great thread winder helper: https://www.printables.com/model/392829-embroidery-swift which is mounted to the top part by pressing. The diameter of the lower screw is 35 mm, and it fits the old type of IKEA FIXE…
Husqvarna Mähroboter Hinterrad passend für das Modell 105 originale Artikel Nummer (400282). Diese Variante wurde um Konstruiert damit sie stabiler und lang lebiger ist! Dieses Objekt ist nicht gleich wie das Original !!!
This a model to attach your iPhone 15 Pro Max to Acer CB282K for facetime using continuity camera
Use the Skadis T-Nuts and some M2 screws for mounting You also need 1x 6x3 magnets and some glue
Nice remix to mount a Walmart Hypertough LED12LUC (815109028295) LED Light. See link https://www.walmart.com/ip/Hyper-Tough-12-INCH-LED-Under-Cabinet-Light/465517393 Not perfect so modify as needed. Make sure to print two. Category: 3D…
These files are from after the first round with ChatGPT. See the GitHub project for the final (current) status. This is research on using ChatGPT to generate a watch that uses my geometry kernel, called Cade. Watch how I built it on…
I sliced it down the middle to print it without supports. The model was created in openscad.
So our newer Frigidair has a deli drawer that keeps popping out of it's connection to the sides when you pull it open (there's a pic of it like this) so I printed this clip to prevent that. I didn't need any tape or glue it just popped on.
Use the f3d file to customize in fusion360! Currently, there is a helical gear on there, but simply delete that if needed! Be sure to use supports! Depending on what you are adding to the design, you may consider changing the print…
Door Panel Fastening Clip for Alfa Romeo, Fiat, Lancia — 14188282 Model compatibility information for OEM part number Alfa Romeo, Fiat, Lancia: 14188282, 46306526, 92511089 Marca Modello Anno Piattaforma Tipo Motore Notes Alfa Romeo 75…
IWS-2820/IWS-2412 holder for HoneycombStorageWall
Ersatzteil für Liebherr Glasplatten-Halterung. Spart euch die 20 € für das Originalteil! Dieser Clip ersetzt den Halter mit der Nummer 7428284 . Material: Nutze PETG oder ASA (lebensmittelecht & kältebeständig). PLA wird im Kühlschrank zu…
Hercules_RC for EMAX CF 2822 MOTORS WING SPAN 1102.21 MM Category: R/C Vehicles
A First version of a holder for my crimper. I plan to use this in the modern gridfinity box so I designed it in 3u height to stack the wirestripper in another 3u height holder underneath it to save on space for more crimps. Printed mine…
Da mir die Kabelhalteklammern (M5282, M5292) beim Öffnen von Kabelkanälen meist brechen und Ersatzteile nur schwer, bzw. nur in 50-er Packs zu kaufen sind, habe ich mir für einen 150mm Tehalit Kabelkanal eine Ersatzklammer gezeichnet und…
I created this part after the original broke. Designed it with Onshape using the original for measurements. Part number: 7231282K00 Print with a strong material like PET-G or ABS for durability - with at least 50% infill. Make sure it's…
I created this parts to replace the old one on my Mercedes V-Class W638. I printed them with PETG 0.1mm and it works proper
This is a parametric rotating knob for an ancient Olivetti DM 282 matrix printer. You can change some values such as walls thickness or pin diameter in the spreadsheet if you want it to be stronger or if my tolerances are not good for…
This is the famous German road sign #282 . It declares the end of all restriction. And you always love to see it on the Autobahn. For more information see this Wikipedia article . The size of the sign is 300mm in diameter. Scale it in x…
ORGANIZZATORE GT282 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This is a case for a display used in FMI51 detectors. It prints in one piece. If you have any ideas on how could i improve it, you can let me know. It's not perfect but it is my first model. it can be colored based on your preference.…
Komplette Anleitung unter http://cool-web.de/3d-druck/webcam-halter-grundig-anycubic-i3-mega-fusion-360-design.htm Complete tutorial at http://cool-web.de/3d-druck/webcam-halter-grundig-anycubic-i3-mega-fusion-360-design.htm (Please use…
3D printable replacement for the rubber/plastic cover fitted over the positive B+ terminal on the alternator. I modelled this from the original terminal cover fitted to my 2008 Toyota HiAce H200 after the original part became cracked and…
BOM: 2 x M3 x 8mm (or longer) screws 2 x M3 hex nuts
This is a set of 1:282.84 scale replicas of the lifeboats from M/S Sobieski, the Polish passenger liner built in 1937 I designed two sizes of lifeboats for a friend's 1:200√2 scale model of the ship The models are intended for 3D printing…
This is a 3d scan of the milwaukee 2825-20 quik-lok powerhead
DeLonghi 5313282411 pulp container coffee maker replacement part Petg
Holder designed for YATO YT-2828 Insulated Screwdrivers. Any screwdrivers works too as long as they fit in following holes: 2 holes 10.5mm 4 holes 8.5mm 1 hole 6.3mm Printed with PET-G 0.3mm layer height Print yato2828 base STL and 4x…
Designed to hold ETA and clone 28xx movements. Requires a M3 x 35mm thumbscrew and threaded insert size M3 x 4 x 5mm, both available on Amazon. Printed with PLA but tougher filaments can be used if desired. After printing, I use a tiny…
Keep your garage or workshop organized with this 3D printable wall mount designed specifically for the Milwaukee M18 Fuel Model 2825-20 Weed Trimmer. The mount is built for easy installation—holes are pre-aligned so you can secure it…
Ersatzteil für Liebherr Glasplatten-Halterung. Spart euch die 20 € für das Originalteil! Dieser Clip ersetzt den Halter mit der Nummer 7428284 . Material: Nutze PETG oder ASA (lebensmittelecht & kältebeständig). PLA wird im Kühlschrank zu…