Counting matching models…
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A fully printable collection of Hex Keys, designed according to DIN ISO 2936 (formerly DIN 911), ranging in size from 0.7 mm to 24 mm. Size L1 (mm) L2 (mm)…
Gridfinity organizer for 0-1" and 1-2" Mitutoyo 293 Quantumike digital micrometers. May fit other versions but I have not verified.
This is a clip to replace the Shure 95A29359 when you loose it. It is not a 1:1 copy, it is wider to be more obvious and fit the foam tape you can buy in the store. This does not fit the stow compartment and depending on what method and…
More stable table stand for LCD Box Mirabox N3 (Ajazz AKP03E) and Mirabox 293S (Ajazz AKP153). There is a recess at the bottom for a 120x80x2 mm silicone sheet. Also the angle of inclination has been slightly changed for more convenient…
This model is compatible with the lego system.
As the name implies: a gridfinity holder for the Mitutoyo 293 Micrometer.
There are two models. One is smooth and matches the original knob. The one with a seam should force the slicer to place the z scar aligned with the indicator. The picture is the smooth version, where the seam is slightly misaligned. It…
You ccan buy the L293D Motor Driver Shield HERE Operating Voltage: 4.5V to 36V (motor supply) Logic Voltage: 5V (from Arduino) Current per Channel: 600 mA continuous (1.2 A peak) Number of Channels: 4 (drives 2 stepper motors or 4 DC…
Hello I want to present my project of 3d printed air purifier - AirMate. This is based on PHILIPS FY0293/30. Assembling is simple, but requires some soldering and cable management. I have used duct fan EMAX 125 EBERG 218 m3h (most likely…
Mitutoyo 293-332-30 2-3" Digital Micrometer Gridfinity Bin
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
Rebuild the model to correct all the mistakes in the original one.
Complément d'information Les petites équerres doivent pouvoir servir pour un montage en demi-rack (half-rack), mais non testé. Les tiges des équerres moyennes et grandes nécessitent des supports mais apportent une excellente rigidité.
GRIDFINITY MITUTOYO MICROMETER TRAY 25-50MM PT 293-612 3x5 INC CAD MODEL
Arresterdramon [293] from Digimon
This custom-designed case for the Streamdock Mirabox HSV293 Slim offers a sleek and functional alternative to the original housing. The original case’s inconvenient viewing angle made it difficult to see details from a seated position. To…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brick corresponds to the LEGO Fence 32932…
A/C evaporator core condensate water drain tube for Chrysler products 1970-93. Mopar part #2936926. Connects to D24mm pipe stub in firewall. Original designer: Chrysler Corporation, Detroit MI, USA This item is also available as…
rock slider per telaio INJORA in metallo con passo 313mm composto da due parti regolabili in larghezza (circa min 71mm max 81mm) @il modello "esterno" deve essere specchiato mentre il modello "telaio" non è essenziale data la simmetria…
DDD Wall Control mounts for the Mitutoyo QuantuMike Series 293 micrometers. Includes all models required from the original project for a complete mounting solution. Currently, this includes: 0-1" Mitutoyo 293-185-30 1-2" Mitutoyo 293-186-30
can be printed as is w/o supports.
This model is a 1:10 scale replica of the original. For the boom and mast, I recommend using PETG material; PLA is suitable for all other parts. Everything was printed on a Prusa CORE One. The stand and its legs snap together and should…
Created for a friend who is rebuilding an old car and wanted to know if I could make this little plastic part. Apparently, the original part number is Delco-Remy 1852935 It fits inside an ignition distributor on many old GM cars common…
An actioncam mount for a Bilora 2936 tripod. Note there are different proportions of quick mounts for Bilora tripods, I just tested it with the 2936. This one has been tested with a gopro and a sjcam. Suggested print parameters: PETG…
Full size slot cover for Adaptec ASC-29320 SCSI PCIe Controller Card that replaces the Low Profile bracket.
A replacement part for this old microwave. numbers: 4856745 4896099
made with tooltrace ai, modified in inventor
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the LEGO Fence…
ORGANIZZATORE GT293 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Der Stiftehalter bietet Platz für bis zu acht Stiften und wurde mit einer Gridfinity-kompatiblen Unterseite ausgestattet. So lässt er sich sicher auf einer Bodenplatte befestigen und flexibel mit weiteren Modulen oder Baugruppen…
Simple model for broken cap from sport pump KIPSTA model 8365293
I bought a B2933 to charge my phone in my car to replace an older iOttie charger that mechanically grips the phone. The included vent mount was surprisingly stable, but because of the way the vent blade depth adjustment mechanism is…
Simple blank module to fill in the second PSU space on Aruba 2930M switches. This has been tested on the following models: JL323A, R0M67A and has only been tested in the PSU slot on the right with a PSU installed in the slot on the left.
Card 2938393 and Scanner For Pretend Play
https://cad.onshape.com/documents/fd60feaa196bbf8ae19c1041/w/68fab0af18f4a97416d7b352/e/0dd5e7d3040d568cf5165cc4?renderMode=0&uiState=6aca6daf4c499bdebf80fc5d
This model is compatible with the lego system.
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
Rebuild the model to correct all the mistakes in the original one.
This model is compatible with the lego system.
A/C evaporator core condensate water drain tube for Chrysler products 1970-93. Mopar part #2936926. Connects to D24mm pipe stub in firewall. Original designer: Chrysler Corporation, Detroit MI, USA This item is also available as…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Designed for detaching L293D Motor Driver Shield from Arduino board, to free up pins
![Arresterdramon [293] from Digimon](https://media.printables.com/media/prints/960643/images/7335855_726d558f-5041-4eeb-9a11-92b6ddf78a66_8680d984-d812-4504-85fe-2fb0b92e7a39/arresterdramon-293-from-digimon.png)
