Counting matching models…
Designed in FreeCAD. I made this Bed Leveling Calibration Test for Creality Ender-3 S1 Plus Size: 300 x 300 mm Set Skirt loops to 0 for this test if you use this option. Total Time: 23m24s
I got tired of the panelclips on the original 3mm acrylic panels, the foam glided down and the panels was moving towards gantry so it got scraped. Made a printable frame in 16 pieces to acomondate foam and hold the panel tight against the…
longer is better länger is besser :-D
Simple Calibration for 300x300mm
Simple leveling test for 30x30cm Printers. Live-leveling is recommended. Recommended nozzle size is 0.4mm with a layer height of 0.2mm. Attached is a Simplify3D factory file for the CR-10s, use at your own risk. Print Settings Rafts: No…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
A remix of the original increasing size so it fills a 300x300 bed. Print Settings Printer Brand: Sovol Printer: SV07+ Rafts: No Supports: Yes Resolution: .18 Infill: 15% Filament: Generic PLA White Notes: This was designed for that sized…
Grille for skirt Voron 2.4 R2 300x300
A fast bed level test meant to be observed live to be able to make real time adjustments. Overall size: 300x300mm The model consists of: Two thin frames to with a crossection of 1.2x0.2mm - which equals 4 extrusion paths a 0.4mm in width.…
Wanted to move the powerswitch to the left side and the power inlet + ethernet to front right side for easier acess. Re cad:ed the original side skirt with a filtered inlet and a keystone opening. Redid frontskirt based on V2.4 Z-Drive…
Printed with PETG. Used 2 M3X8 screws and 2 M3 knurled nuts for easy on/off. My .stl has a dogear as I had also originally tried to print in ABS and this was necessary to prevent warpage/lifting. Thanks, ChokletMoose and Sneaks for two…
Slim Shady's wonderful “head” uses plexiglass of special dimensions, and even with rounded edges. If you don't have the right tool, it's a bit of a challenge to make such a glass. You need to look for a workshop that will cut out the…
IG post: https://www.instagram.com/p/BzpaJMpovue/
Bigger and lighter simple Indor glider for 300x300 printers, with moved CG (longer front fuselage).Print with15% infill.
Added bedfans to fit the original extrusion cover. Added inverted z-chain files (inverted z-chain cover 1+2 and upper + bottom)
Same of original: https://www.thingiverse.com/thing:29612 but with distance of 200 mm for better precision. Category: 3D Printing Tests
BOM: Qty 2 - M4 Hex Nuts Qty. 4 - M4 Knurled Nuts: https://www.mcmaster.com/90368A200/ --OR-- Qty. 4 - Silicone Bed Spacers CR-10 Hotbed: https://a.co/d/25VRBL Print Settings: Material Used: Inland (Micro Center) PETG-CF I just followed…
Remixed legacy parts to use a 235x235 ender 3 style heated bed. The top and bottom frames will need at least a 310x310 bed printer.
Fräsplatte in Kombination mit 2 Stück 20 x 40 AluProfile eine schöne Fräshilfe Category: Machine Tools
0.2 mm layer height
Filtro para arqueta de 300x300 Tapa para arqueta de 300x300 El filtro se imprime completo. Marco para el filtro se compone de 4 piezas y 4 pernos de unión. Se necesita un trozo de tubo de 20mm para el asa. La tapa se compone de 4 partes…
IKEA Skadis board holes are 40/20mm apart, while the VESA mount on TV or monitors are 100/200/300mm apart. hence I've created an mount adapter that will be able to mount the Skadis to VESA screw holes. my TV was VESA 300x300 (with M8…
PEI Bed Plate Mount 2 slots for 300x300x300mm. Vertical or Horizontal orientation. Materials needed: VHB Version: 4 x M3 5,7 heat inserts 4 x M3 BHSC 25mm 1" VHB Tape ------------------------------ Hardware Version: 4 x M3 5.7 heat…
Bigger and lighter simple Indor glider for 300x300 printers, with moved CG (longer front fuselage).Print with15% infill.
A remix of the original increasing size so it fills a 300x300 bed. Print Settings Printer Brand: Sovol Printer: SV07+ Rafts: No Supports: Yes Resolution: .18 Infill: 15% Filament: Generic PLA White Notes: This was designed for that sized…
Simply took the original bucket lid and split it adding holes for reconnection using 10-32 nuts and bolts.
I made a laser etched aluminum plate for a co-worker and wanted to frame it in a 12X12 frame. The aluminum was slightly undersized, so I made these spacers to center and secure the plate.
PEI Bed Plate Mount 2 slots for 300x300x300mm. Vertical or Horizontal orientation. Materials needed: VHB Version: 4 x M3 5,7 heat inserts 4 x M3 BHSC 25mm 1" VHB Tape ------------------------------ Hardware Version: 4 x M3 5.7 heat…
Just a simple tray I designed with lots of ridges and compartments to organize my tools and mills for my CNC. Obviously it can be used to organize anything else, the Er11 colet holder is a separate piece. I also posted a 3mf with the…
A Mount for a 9N ERCF on the Back of a 300x300 Build Volume V2.4 You need also : 4x M5x23mm + https://github.com/Tircown/ERCF-easy-brd/blob/main/mods/Bottom%20bracket/ercf_easy_brd%20bracket%20bottom.stl and…
This is a extrusion cover for Voron 2.4 300x300. It covers the 2020 extrusions and add dampening to the bottom deck with foam. Same model printed 2 times since left and right is the same, no supports needed. Printed with 0.2 layer,…
Self created speed and acceleration test for large beds 300x300 beds only this file is 250x250 Category: 3D Printing
The profile is made in one part and can be easily changed in height and size. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Infill: 50% Category: 3D Printing
I had to shorten the original model by 2.6mm to fit my V2.4 300x300; please measure twice before printing. 29
This lid can be printed for the Rat Rig V Core 3 300 x 300 printer on itself. It is big, it takes a few rolls. One shown is printed with PLA which appears fine for printing ABS parts. See the original sketch for a hardware list. The…
300x300 bed mesh first layer test that i designed for my voron 2.4 Recommend 0.4 nozzle size with 0.2 layer height
A pack of resources to check and test the bed calibration in 300x300 printers. Like the Artillery Sidewinder X4+, Artillery sidewinder X3+, Elegoo Plus, and others. It will print small squares of 20x0,4mm (two layers) Recommendation: If…
