Counting matching models…
nothing too much to say. the fan is disconnected but the tolerances are tight so it might not be able to spin for you. could be a cool challenge for your printer? you definitely need a resin printer for this, and even still the “fins”…
My original fans where starting to making bearing noises, so I made these brackets to allow me to install whatever 120mm or 140mm fans I wanted. This bracket allows installation of 2x120mm or 2x140mm fans. This bracket will make the card…
Parts form Ikea - Komplement - 130900/130901
Bracket to mount two 120mm fans to the original heatsink. Designed around Strix 3080ti, should fit any card with the same heatsink design (3090, 3080/ti, 3070/ti). Split into four parts to print simultaneously on common printers. Designed…
GPU: Alienware RTX 3090 OEM card Print suggestion: 100% infill; PETG
This model is compatible with the lego system.
Work in Progress: This is a backplate mounted cooling solution for EVGA 3090FTW3, it can be used with heatsinks to enhance the cooling ability of the stock backplate, which has heatpipes. I realized the o11 mini's airflow was not doing…
Print in PET(G) or ABS/ASA for heat resistance. This specific chassis gets hot; feel the glass after a bench! Normal settings otherwise. Hope this helps someone!
Everything is in the Video If you want to makee a re-shroud mode for your GPU let me know and we can talk ;) Category: 3D Printer Accessories
Thank you @Nessuno0505_6893 for uploading the Fusion file as well - this makes remixing so much easier and is the main reason I chose this design. The 3mf also includes the nut for locking the holder designed by @TheRedR0cket2_273136…
RTX 3090 FE 12 pin power connector clip. 12 16AWG wires fit perfectly.
The guide with photos on how to fan swap/upgrade most stock GPU fans and use the EVGA 3090 XC3 custom fan mount can be found here .
After having issues with the center brush, I realized that it was working using a rubber belt and after two years of daily usage, It seems to suffer a lot of wear, ending in a non-functional brush. Perhaps I'm not a fan of rubber belts, I…
Cooler for the EKWB backplate for the EVGA 3090 FTW3 Ultra. Uses 5x60mm/1cm fans. 6mm M3 and 10mm M2.5 screws to hold things together. M2.5 12mm to screw it to the 3090. Do not use PLA as it gets soft at 60C. PETG (80C) or ABS (100C)…
Old Black Lid handle went brittle and kept breaking. Designed a replacement that happens to make the kettle look like a chicken. Print in ABS or other temp resistant material (not PLA, likely not PETG). Enjoy
to squeeze the 3090 founders edition into a mini ATX housing, I built this flat bracket, maybe it will help someone.
I wanted a full plate to mount the fans with screws as the card is running on a Bee-link EX Pro. Connecting with just zip-ties seemed messy. I used a pair of Noctua NF-A12x25 PWM fans. The existing shroud screws are way to short, replace…
You can see more pictures here https://imgur.com/gallery/eRcGVT4 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 100 Filament: Prusament PETG Jet Black Category: DIY
This is Sebestyén Mátrai's fan mount (split into two parts) for the EVGA FTW3 GPU, see his original model for details here . I printed in ABS with inner and outer brims. I dissolved the waste brims in acetone to acetone weld the two parts…
Designed this bracket to support my 3090 FE, it wasn't sagging at all but felt better having it supported. This probably isn't very useful for most people since its sized for my specific case setup but figured I would upload it anyways.…
Inspired by https://boilingsteam.com/upgrading-fans-with-a-custom-shroud-on-a-rtx3090-goodbye-fan-noise/ Replaces stock fan by two noctua ones for silent operation. I used PETG and with already two months of usage with room temperature up…
The stock fan shroud for the Zotac RTX 3090 sounds like a jet engine at full load, so I designed a shroud to fit two Noctua NF-A12x25s onto it instead of the three stock 80mm fans. Now runs basically silent at full load. Mounts using the…
My softtube connection for my Nvidia 3090 Active Water-cooling Backplate became loose two times already (one side was disconnected). To fix this, I created a securing bracket to keep it in place. Printing I printed it on a Prusa Core One…
